dmesg Очень много пишет несколько страниц. [ 0.676898] system 00:0a: ioport range 0x260-0x273 has been reserved [ 0.676900] system 00:0a: ioport range 0x280-0x293 has been reserved [ 0.676902] system 00:0a: ioport range 0x388-0x389 has been reserved [ 0.676904] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved [ 0.676905] system 00:0a: ioport range 0x40b-0x40b has been reserved [ 0.676908] system 00:0a: ioport range 0x4d6-0x4d6 has been reserved [ 0.676910] system 00:0a: ioport range 0xb00-0xb0f has been reserved [ 0.676912] system 00:0a: ioport range 0xb30-0xb3f has been reserved [ 0.676914] system 00:0a: ioport range 0xc00-0xc01 has been reserved [ 0.676916] system 00:0a: ioport range 0xc14-0xc14 has been reserved [ 0.676918] system 00:0a: ioport range 0xc50-0xc51 has been reserved [ 0.676920] system 00:0a: ioport range 0xc52-0xc52 has been reserved [ 0.676922] system 00:0a: ioport range 0xc6c-0xc6c has been reserved [ 0.676924] system 00:0a: ioport range 0xc6f-0xc6f has been reserved [ 0.676926] system 00:0a: ioport range 0xcd0-0xcd1 has been reserved [ 0.676928] system 00:0a: ioport range 0xcd2-0xcd3 has been reserved [ 0.676930] system 00:0a: ioport range 0xcd4-0xcd5 has been reserved [ 0.676932] system 00:0a: ioport range 0xcd6-0xcd7 has been reserved [ 0.676934] system 00:0a: ioport range 0xcd8-0xcdf has been reserved [ 0.676936] system 00:0a: ioport range 0x800-0x89f has been reserved [ 0.676938] system 00:0a: ioport range 0xb20-0xb2f has been reserved [ 0.676940] system 00:0a: ioport range 0x900-0x90f has been reserved [ 0.676942] system 00:0a: ioport range 0x910-0x91f has been reserved [ 0.676945] system 00:0a: ioport range 0xfe00-0xfefe has been reserved [ 0.676947] system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved [ 0.676949] system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved [ 0.676953] system 00:0b: ioport range 0xe00-0xe0f has been reserved [ 0.676955] system 00:0b: ioport range 0xe80-0xe8f has been reserved [ 0.676957] system 00:0b: ioport range 0xf40-0xf4f has been reserved [ 0.676961] system 00:0b: ioport range 0xa30-0xa3f has been reserved [ 0.676965] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.676970] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.676972] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.676974] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.676978] system 00:0d: iomem range 0x100000-0xbfffffff could not be reserved [ 0.676980] system 00:0d: iomem range 0xfed45000-0xffffffff could not be reserved [ 0.681688] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.681690] pci 0000:00:01.0: IO window: 0xb000-0xbfff [ 0.681694] pci 0000:00:01.0: MEM window: 0xfe600000-0xfe7fffff [ 0.681697] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.681701] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 [ 0.681703] pci 0000:00:02.0: IO window: 0xc000-0xcfff [ 0.681705] pci 0000:00:02.0: MEM window: 0xfe800000-0xfe8fffff [ 0.681708] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.681711] pci 0000:00:05.0: PCI bridge, secondary bus 0000:03 [ 0.681713] pci 0000:00:05.0: IO window: 0xd000-0xdfff [ 0.681716] pci 0000:00:05.0: MEM window: 0xfe900000-0xfe9fffff [ 0.681718] pci 0000:00:05.0: PREFETCH window: disabled [ 0.681721] pci 0000:00:06.0: PCI bridge, secondary bus 0000:04 [ 0.681723] pci 0000:00:06.0: IO window: disabled [ 0.681725] pci 0000:00:06.0: MEM window: 0xfea00000-0xfeafffff [ 0.681727] pci 0000:00:06.0: PREFETCH window: disabled [ 0.681731] pci 0000:00:14.4: PCI bridge, secondary bus 0000:05 [ 0.681733] pci 0000:00:14.4: IO window: 0xe000-0xefff [ 0.681738] pci 0000:00:14.4: MEM window: 0xfeb00000-0xfebfffff [ 0.681742] pci 0000:00:14.4: PREFETCH window: disabled [ 0.681758] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.681761] pci 0000:00:02.0: setting latency timer to 64 [ 0.681767] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.681770] pci 0000:00:05.0: setting latency timer to 64 [ 0.681774] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.681777] pci 0000:00:06.0: setting latency timer to 64 [ 0.681783] bus: 00 index 0 io port: [0x00-0xffff] [ 0.681786] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff] [ 0.681787] bus: 01 index 0 io port: [0xb000-0xbfff] [ 0.681789] bus: 01 index 1 mmio: [0xfe600000-0xfe7fffff] [ 0.681793] bus: 01 index 2 mmio: [0xc0000000-0xcfffffff] [ 0.681795] bus: 01 index 3 mmio: [0x0-0x0] [ 0.681797] bus: 02 index 0 io port: [0xc000-0xcfff] [ 0.681798] bus: 02 index 1 mmio: [0xfe800000-0xfe8fffff] [ 0.681800] bus: 02 index 2 mmio: [0xd0000000-0xdfffffff] [ 0.681801] bus: 02 index 3 mmio: [0x0-0x0] [ 0.681803] bus: 03 index 0 io port: [0xd000-0xdfff] [ 0.681805] bus: 03 index 1 mmio: [0xfe900000-0xfe9fffff] [ 0.681806] bus: 03 index 2 mmio: [0x0-0x0] [ 0.681807] bus: 03 index 3 mmio: [0x0-0x0] [ 0.681809] bus: 04 index 0 mmio: [0x0-0x0] [ 0.681810] bus: 04 index 1 mmio: [0xfea00000-0xfeafffff] [ 0.681812] bus: 04 index 2 mmio: [0x0-0x0] [ 0.681813] bus: 04 index 3 mmio: [0x0-0x0] [ 0.681815] bus: 05 index 0 io port: [0xe000-0xefff] [ 0.681816] bus: 05 index 1 mmio: [0xfeb00000-0xfebfffff] [ 0.681818] bus: 05 index 2 mmio: [0x0-0x0] [ 0.681819] bus: 05 index 3 io port: [0x00-0xffff] [ 0.681821] bus: 05 index 4 mmio: [0x000000-0xffffffffffffffff] [ 0.681831] NET: Registered protocol family 2 [ 0.720061] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.720575] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.721884] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.722220] TCP: Hash tables configured (established 262144 bind 65536) [ 0.722223] TCP reno registered [ 0.732110] NET: Registered protocol family 1 [ 0.732222] checking if image is initramfs... it is [ 1.245849] Freeing initrd memory: 7778k freed [ 1.249162] audit: initializing netlink socket (disabled) [ 1.249180] type=2000 audit(1253487086.248:1): initialized [ 1.255973] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.257108] VFS: Disk quotas dquot_6.5.1 [ 1.257154] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.257662] fuse init (API version 7.10) [ 1.257727] msgmni has been set to 7287 [ 1.257894] alg: No test for stdrng (krng) [ 1.257906] io scheduler noop registered [ 1.257908] io scheduler anticipatory registered [ 1.257909] io scheduler deadline registered [ 1.257941] io scheduler cfq registered (default) [ 1.404023] pci 0000:02:00.0: Boot video device [ 1.410572] pcieport-driver 0000:00:02.0: setting latency timer to 64 [ 1.410594] pcieport-driver 0000:00:02.0: found MSI capability [ 1.410612] pcieport-driver 0000:00:02.0: irq 2302 for MSI/MSI-X [ 1.410619] pci_express 0000:00:02.0:pcie00: allocate port service [ 1.410631] pci_express 0000:00:02.0:pcie03: allocate port service [ 1.410663] pcieport-driver 0000:00:05.0: setting latency timer to 64 [ 1.410683] pcieport-driver 0000:00:05.0: found MSI capability [ 1.410696] pcieport-driver 0000:00:05.0: irq 2301 for MSI/MSI-X [ 1.410703] pci_express 0000:00:05.0:pcie00: allocate port service [ 1.410712] pci_express 0000:00:05.0:pcie03: allocate port service [ 1.410744] pcieport-driver 0000:00:06.0: setting latency timer to 64 [ 1.410764] pcieport-driver 0000:00:06.0: found MSI capability [ 1.410777] pcieport-driver 0000:00:06.0: irq 2300 for MSI/MSI-X [ 1.410784] pci_express 0000:00:06.0:pcie00: allocate port service [ 1.410793] pci_express 0000:00:06.0:pcie03: allocate port service [ 1.410836] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.410843] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.410961] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 1.410964] ACPI: Power Button (FF) [PWRF] [ 1.411011] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 1.411022] ACPI: Power Button (CM) [PWRB] [ 1.411322] processor ACPI_CPU:00: registered as cooling_device0 [ 1.411327] ACPI: Processor [P001] (supports 8 throttling states) [ 1.411380] processor ACPI_CPU:01: registered as cooling_device1 [ 1.411410] processor ACPI_CPU:02: registered as cooling_device2 [ 1.411440] processor ACPI_CPU:03: registered as cooling_device3 [ 1.417373] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.418565] ACPI: Thermal Zone [THRM] (43 C) [ 1.444224] Linux agpgart interface v0.103 [ 1.444234] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.445014] brd: module loaded [ 1.445255] loop: module loaded [ 1.445310] Fixed MDIO Bus: probed [ 1.445315] PPP generic driver version 2.4.2 [ 1.445367] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.445393] Driver 'sd' needs updating - please use bus_type methods [ 1.445401] Driver 'sr' needs updating - please use bus_type methods [ 1.445430] ahci 0000:00:11.0: version 3.0 [ 1.445451] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.445512] ahci 0000:00:11.0: irq 2299 for MSI/MSI-X [ 1.445597] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.445600] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck led clo pmp pio [ 1.445931] scsi0 : ahci [ 1.446026] scsi1 : ahci [ 1.446074] scsi2 : ahci [ 1.446121] scsi3 : ahci [ 1.446198] ata1: SATA max UDMA/133 abar m1...@0xfe5ff800 port 0xfe5ff900 irq 2299 [ 1.446202] ata2: SATA max UDMA/133 abar m1...@0xfe5ff800 port 0xfe5ff980 irq 2299 [ 1.446205] ata3: SATA max UDMA/133 abar m1...@0xfe5ff800 port 0xfe5ffa00 irq 2299 [ 1.446208] ata4: SATA max UDMA/133 abar m1...@0xfe5ff800 port 0xfe5ffa80 irq 2299 [ 1.928015] ata1: softreset failed (device not ready) [ 1.928065] ata1: failed due to HW bug, retry pmp=0 [ 2.092032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.118891] ata1.00: ATA-8: ST3500410AS, CC34, max UDMA/133 [ 2.118893] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.158242] ata1.00: configured for UDMA/133 [ 2.476033] ata2: SATA link down (SStatus 0 SControl 300) [ 2.796030] ata3: SATA link down (SStatus 0 SControl 300) [ 3.116030] ata4: SATA link down (SStatus 0 SControl 300) [ 3.116125] scsi 0:0:0:0: Direct-Access ATA ST3500410AS CC34 PQ: 0 ANSI: 5 [ 3.116202] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 3.116213] sd 0:0:0:0: [sda] Write Protect is off [ 3.116215] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.116232] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.116277] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB) [ 3.116287] sd 0:0:0:0: [sda] Write Protect is off [ 3.116289] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.116306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.116309] sda: sda2 < sda5 sda6 sda7 > [ 3.166953] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.166994] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.167232] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.167258] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 3.167337] scsi4 : pata_atiixp [ 3.167396] scsi5 : pata_atiixp [ 3.168677] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 3.168679] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 3.488654] ata6.00: ATAPI: TEAC DW-552G, N4K1, max UDMA/33 [ 3.489329] ata6.00: configured for UDMA/33 [ 3.490108] scsi 5:0:0:0: CD-ROM TEAC DW-552G N4K1 PQ: 0 ANSI: 5 [ 3.492013] sr0: scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray [ 3.492016] Uniform CD-ROM driver Revision: 3.20 [ 3.492093] sr 5:0:0:0: Attached scsi CD-ROM sr0 [ 3.492125] sr 5:0:0:0: Attached scsi generic sg1 type 5 [ 3.492429] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.492449] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.492463] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 3.492506] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 3.492538] ehci_hcd 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround [ 3.492555] ehci_hcd 0000:00:12.2: debug port 1 [ 3.492572] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe5ff000 [ 3.505514] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 3.505578] usb usb1: configuration #1 chosen from 1 choice [ 3.505600] hub 1-0:1.0: USB hub found [ 3.505606] hub 1-0:1.0: 6 ports detected [ 3.505707] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3.505715] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 3.505747] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 3.505767] ehci_hcd 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround [ 3.505783] ehci_hcd 0000:00:13.2: debug port 1 [ 3.505795] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe5fa800 [ 3.516010] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 3.516062] usb usb2: configuration #1 chosen from 1 choice [ 3.516082] hub 2-0:1.0: USB hub found [ 3.516087] hub 2-0:1.0: 6 ports detected [ 3.516173] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 3.516188] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.516197] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 3.516228] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 3.516249] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe5fe000 [ 3.576037] usb usb3: configuration #1 chosen from 1 choice [ 3.576055] hub 3-0:1.0: USB hub found [ 3.576062] hub 3-0:1.0: 3 ports detected [ 3.576142] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.576151] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 3.576186] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4 [ 3.576199] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe5fd000 [ 3.632042] usb usb4: configuration #1 chosen from 1 choice [ 3.632059] hub 4-0:1.0: USB hub found [ 3.632073] hub 4-0:1.0: 3 ports detected [ 3.632157] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.632166] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.632198] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 3.632216] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe5fc000 [ 3.688027] usb usb5: configuration #1 chosen from 1 choice [ 3.688044] hub 5-0:1.0: USB hub found [ 3.688051] hub 5-0:1.0: 3 ports detected [ 3.688133] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.688142] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 3.688174] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 3.688187] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe5fb000 [ 3.744034] usb usb6: configuration #1 chosen from 1 choice [ 3.744053] hub 6-0:1.0: USB hub found [ 3.744072] hub 6-0:1.0: 3 ports detected [ 3.744157] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.744165] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 3.744196] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 3.744209] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe5f9000 [ 3.800038] usb usb7: configuration #1 chosen from 1 choice [ 3.800056] hub 7-0:1.0: USB hub found [ 3.800072] hub 7-0:1.0: 2 ports detected [ 3.800155] uhci_hcd: USB Universal Host Controller Interface driver [ 3.800217] PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12 [ 3.800566] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.800572] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.809534] mice: PS/2 mouse device common for all mice [ 3.845565] rtc_cmos 00:05: RTC can wake from S4 [ 3.845592] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.845616] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.845665] device-mapper: uevent: version 1.0.3 [ 3.845734] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-de...@redhat.com [ 3.845868] device-mapper: multipath: version 1.0.5 loaded [ 3.845870] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.846014] cpuidle: using governor ladder [ 3.846016] cpuidle: using governor menu [ 3.846386] TCP cubic registered [ 3.846441] NET: Registered protocol family 10 [ 3.846802] lo: Disabled Privacy Extensions [ 3.847058] NET: Registered protocol family 17 [ 3.847076] Bluetooth: L2CAP ver 2.11 [ 3.847078] Bluetooth: L2CAP socket layer initialized [ 3.847080] Bluetooth: SCO (Voice Link) ver 0.6 [ 3.847081] Bluetooth: SCO socket layer initialized [ 3.847112] Bluetooth: RFCOMM socket layer initialized [ 3.847118] Bluetooth: RFCOMM TTY layer initialized [ 3.847119] Bluetooth: RFCOMM ver 1.10 [ 3.847170] powernow-k8: Found 1 AMD Phenom(tm) 9500 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) [ 3.847204] powernow-k8: 0 : pstate 0 (2200 MHz) [ 3.847206] powernow-k8: 1 : pstate 1 (1100 MHz) [ 3.847484] registered taskstats version 1 [ 3.847626] Magic number: 9:196:907 [ 3.847718] rtc_cmos 00:05: setting system clock to 2009-09-20 22:51:30 UTC (1253487090) [ 3.847721] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.847722] EDD information not available. [ 3.847753] Freeing unused kernel memory: 532k freed [ 3.847940] Write protecting the kernel read-only data: 6688k [ 4.028535] usb 3-3: new low speed USB device using ohci_hcd and address 2 [ 4.049542] sky2 driver version 1.22 [ 4.049604] sky2 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 4.049620] sky2 0000:03:00.0: setting latency timer to 64 [ 4.049694] sky2 0000:03:00.0: Yukon-2 Extreme chip revision 2 [ 4.075628] ohci1394 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 4.075639] ohci1394 0000:04:00.0: setting latency timer to 64 [ 4.081603] sky2 0000:03:00.0: Marvell Yukon 88E8071 Gigabit Ethernet Controller [ 4.081606] Part Number: Yukon 88E8071 [ 4.081608] Engineering Level: Rev. 1.6 [ 4.081609] Manufacturer: Marvell [ 4.081668] sky2 0000:03:00.0: irq 2298 for MSI/MSI-X [ 4.082277] sky2 eth0: addr 00:1c:25:8e:ca:5e [ 4.126436] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/4] [ 4.233816] usb 3-3: configuration #1 chosen from 1 choice [ 4.252264] usbcore: registered new interface driver hiddev [ 4.257897] input: B16_b_02 USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-3/3-3:1.0/input/input3 [ 4.284544] generic-usb 0003:046D:C024.0001: input,hidraw0: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:12.0-3/input0 [ 4.284556] usbcore: registered new interface driver usbhid [ 4.284558] usbhid: v2.6:USB HID core driver [ 4.358695] PM: Starting manual resume from disk [ 4.358698] PM: Resume from partition 8:7 [ 4.358700] PM: Checking hibernation image. [ 4.358855] PM: Resume from disk failed. [ 4.391169] kjournald starting. Commit interval 5 seconds [ 4.391177] EXT3-fs: mounted filesystem with ordered data mode. [ 4.456016] usb 2-6: new high speed USB device using ehci_hcd and address 3 [ 5.148806] usb 2-6: configuration #1 chosen from 1 choice [ 5.405615] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0078da1700016c20] [ 5.413519] usb 5-2: new full speed USB device using ohci_hcd and address 2 [ 5.578381] usb 5-2: configuration #1 chosen from 1 choice [ 5.582331] hub 5-2:1.0: USB hub found [ 5.584307] hub 5-2:1.0: 4 ports detected [ 5.873731] usb 5-2.4: new low speed USB device using ohci_hcd and address 3 [ 5.985559] usb 5-2.4: configuration #1 chosen from 1 choice [ 5.994716] input: Ideazon Zboard as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2.4/5-2.4:1.0/input/input4 [ 6.025548] generic-usb 0003:1038:0100.0002: input,hidraw1: USB HID v1.10 Keyboard [Ideazon Zboard] on usb-0000:00:13.0-2.4/input0 [ 6.033703] generic-usb: probe of 0003:1038:0100.0003 failed with error -22 [ 8.138789] udev: starting version 141 [ 8.586536] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 8.605136] [fglrx] Maximum main memory to use for locked dma buffers: 3487 MBytes. [ 8.605162] [fglrx] vendor: 1002 device: 9610 count: 1 [ 8.605270] [fglrx] vendor: 1002 device: 9505 count: 2 [ 8.605554] [fglrx] ioport: bar 1, base 0xb000, size: 0x100 [ 8.605564] pci 0000:01:05.0: enabling device (0006 -> 0007) [ 8.605571] pci 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.605576] pci 0000:01:05.0: setting latency timer to 64 [ 8.605718] [fglrx] ioport: bar 4, base 0xc000, size: 0x100 [ 8.605725] pci 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 8.605728] pci 0000:02:00.0: setting latency timer to 64 [ 8.607057] [fglrx] Driver built-in PAT support is enabled successfully [ 8.609632] [fglrx] module loaded - fglrx 8.65.4 [Aug 13 2009] with 2 minors [ 8.625556] cfg80211: Calling CRDA to update world regulatory domain [ 8.682309] shpchp 0000:00:01.0: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0 [ 8.682314] shpchp 0000:00:01.0: Cannot reserve MMIO region [ 8.682386] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 8.711617] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 8.717429] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 8.785669] cfg80211: World regulatory domain updated: [ 8.785672] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 8.785674] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.785677] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.785678] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 8.785680] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.785682] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 8.821542] Initializing USB Mass Storage driver... [ 8.822302] scsi6 : SCSI emulation for USB Mass Storage devices [ 8.822477] usb-storage: device found at 3 [ 8.822481] usb-storage: waiting for device to settle before scanning [ 8.822502] usbcore: registered new interface driver usb-storage [ 8.822543] USB Mass Storage support registered. [ 8.849720] acer-wmi: Acer Laptop ACPI-WMI Extras [ 8.849729] acer-wmi: No or unsupported WMI interface, unable to load [ 8.970658] rtl8180 0000:05:06.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 9.003318] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.058703] HDA Intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.058773] HDA Intel 0000:01:05.1: setting latency timer to 64 [ 9.090904] phy0: Selected rate control algorithm 'pid' [ 9.108496] HDA Intel 0000:02:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 9.108527] HDA Intel 0000:02:00.1: setting latency timer to 64 [ 9.122222] phy0: hwaddr 00:06:4f:65:75:28, RTL8185vD + rtl8225z2 [ 12.497974] lp: driver loaded but no devices found [ 12.655980] Adding 1638588k swap on /dev/sda7. Priority:-1 extents:1 across:1638588k [ 13.205955] EXT3 FS on sda6, internal journal [ 13.820248] usb-storage: device scan complete [ 13.826465] scsi 6:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS [ 13.832682] scsi 6:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS [ 13.838916] scsi 6:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS [ 13.845156] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS [ 13.847713] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 13.848705] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 13.851736] sd 6:0:0:1: [sdc] Attached SCSI removable disk [ 13.852310] sd 6:0:0:1: Attached scsi generic sg3 type 0 [ 13.858848] sd 6:0:0:2: [sdd] Attached SCSI removable disk [ 13.858912] sd 6:0:0:2: Attached scsi generic sg4 type 0 [ 13.861179] sd 6:0:0:3: [sde] Attached SCSI removable disk [ 13.861240] sd 6:0:0:3: Attached scsi generic sg5 type 0 [ 14.096010] kjournald starting. Commit interval 5 seconds [ 14.096015] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended [ 14.096269] EXT3 FS on sda5, internal journal [ 14.096275] EXT3-fs: mounted filesystem with ordered data mode. [ 14.413628] type=1505 audit(1253472701.064:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2281 [ 14.455050] type=1505 audit(1253472701.104:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2285 [ 14.455176] type=1505 audit(1253472701.104:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2285 [ 14.455214] type=1505 audit(1253472701.104:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2285 [ 14.455247] type=1505 audit(1253472701.104:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2285 [ 14.570311] type=1505 audit(1253472701.220:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2290 [ 14.570484] type=1505 audit(1253472701.220:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2290 [ 14.597208] type=1505 audit(1253472701.248:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2294 [ 19.787444] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 19.787448] vboxdrv: Successfully done. [ 19.787450] vboxdrv: Found 4 processor cores. [ 19.787525] VBoxDrv: dbg - g_abExecMemory=ffffffffa04feb40 [ 19.787580] vboxdrv: fAsync=0 offMin=0x398 offMax=0x1d6b [ 19.787624] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 19.787626] vboxdrv: Successfully loaded version 2.1.4_OSE (interface 0x000a0009). [ 19.995052] VBoxNetFlt: dbg - g_abExecMemory=ffffffffa069d980 [ 20.954045] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.954049] Bluetooth: BNEP filters: protocol multicast [ 20.975461] Bridge firewalling registered [ 22.908284] ppdev: user-space parallel port driver [ 23.048936] [fglrx] Firegl kernel thread PID: 3687 [ 23.078605] [fglrx] GART Table is not in FRAME_BUFFER range [ 25.412866] [fglrx] Gart USWC size:1137 M. [ 25.412870] [fglrx] Gart cacheable size:451 M. [ 25.412876] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 25.412878] [fglrx] Reserved FB block: Unshared offset:fc6e000, size:392000 [ 25.412880] [fglrx] Reserved FB block: Unshared offset:3fffc000, size:4000 [ 27.349423] sky2 eth0: enabling interface [ 27.350250] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.030221] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [ 31.309026] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 31.321658] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 42.156023] eth0: no IPv6 routers present [ 46.289643] cdrom: sr0: mrw address space DMA selected [ 46.369753] cdrom: sr0: mrw address space DMA selected [ 46.451119] UDF-fs: No VRS found [ 46.473823] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 46.474317] ISOFS: changing to secondary root [ 143.867652] process `skype' is using obsolete setsockopt SO_BSDCOMPAT [ 1236.110871] Too big adjustment 32 [ 1236.149658] Too big adjustment 32 [ 1750.085168] Too big adjustment 32 [ 1750.121999] Too big adjustment 32 [ 4265.305326] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [ 4274.536236] npviewer.bin[29139]: segfault at ff99cd48 ip 00000000ff99cd48 sp 00000000ffe8321c error 14 [ 4532.575885] sky2 eth0: rx error, status 0x5ea0002 length 1514 [ 9046.316618] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [13842.305023] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [18290.309534] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [18376.305537] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [19174.309532] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [22180.305527] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [23066.309537] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [24698.305531] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [25475.282508] sky2 eth0: Link is down. [25477.009363] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [25494.075071] sky2 eth0: Link is down. [25495.707689] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both [32914.221538] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [35873.224035] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [53168.220598] usb 2-6: reset high speed USB device using ehci_hcd and address 3 [57775.221546] usb 2-6: reset high speed USB device using ehci_hcd and address 3
В Пнд, 21/09/2009 в 13:13 +0900, Vladimir Khramtsov пишет: > dmesg -- ubuntu-ru mailing list ubuntu-ru@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-ru