I have posted this on the Ubuntu support forums, but to see if I speed up getting help, I have also posted it here. This is a Thikpad T42, and was working fine before the upgrade and although I allowed Synaptic to manage the upgrade, I have, since it broke, booted from an 8.1 live CD and the networking is fine with the live CD.
When rebooting the network manager icon spins for a while and then tells me the network is disconnected and that I am now offline. I have tried rebooting a couple of times after the upgrade but this doesn't help Same problem occurs whether I try to connect to the wireless or wired networks. This is only an interim upgrade on my way to jaunty, but I assume I need to get 8.1 working properly before upgrading. In any case I, ideally need, to get my network back up and runnning to download Jaunty. Below are the print outs from lshw -C network and ifconfig and /etc/network/interfaces only has this in it: auto lo iface lo inet loopback any suggestion gratefully recieved. Thanks, Graham -------------------------------------------------------------- gra...@t42-linux:~$ lshw -c network WARNING: you should run this program as super-user. *-network:0 description: Ethernet interface product: 82540EP Gigabit Ethernet Controller (Mobile) vendor: Intel Corporation physical id: 1 bus info: p...@0000:02:01.0 logical name: eth0 version: 03 serial: 00:0d:60:fd:6b:7b width: 32 bits clock: 66MHz capabilities: bus_master cap_list ethernet physical configuration: broadcast=yes driver=e1000 driverversion=7.3.21-k3-NAPI firmware=N/A latency=64 mingnt=255 module=e1000 multicast=yes *-network:1 description: Wireless interface product: PRO/Wireless 2200BG [Calexico2] Network Connection vendor: Intel Corporation physical id: 2 bus info: p...@0000:02:02.0 logical name: eth1 version: 05 serial: 00:0e:35:58:5f:63 width: 32 bits clock: 33MHz capabilities: bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ipw2200 driverversion=1.2.2kmprq firmware=ABG:9.0.2.6 (Mar 22 2005) latency=64 maxlatency=24 mingnt=3 module=ipw2200 multicast=yes wireless=unassociated *-network DISABLED description: Ethernet interface physical id: 1 logical name: pan0 serial: ca:28:2a:70:43:8d capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A multicast=yes ---------------------------------------------------------------- gra...@t42-linux:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:0d:60:fd:6b:7b UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:333 errors:0 dropped:0 overruns:0 frame:0 TX packets:2 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:24988 (24.9 KB) TX bytes:684 (684.0 B) eth1 Link encap:Ethernet HWaddr 00:0e:35:58:5f:63 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:1 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2634 (2.6 KB) TX bytes:1680 (1.6 KB) Interrupt:11 Base address:0x2000 Memory:c0214000-c0214fff lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:38 errors:0 dropped:0 overruns:0 frame:0 TX packets:38 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2744 (2.7 KB) TX bytes:2744 (2.7 KB) ----------------------------------------------------------------- -- ubuntu-uk@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-uk https://wiki.ubuntu.com/UKTeam/
