I'm running into the same issue with my mother-in-law's laptop - an hp
pavilion xh675. Graphics Card is: Trident Microsystems CyberBlade/XP
(rev 63). I can't enable the visual effects. I had 8.10 and now have
9.04 with the same issue.
Here's my output on the command you asked the gysirith to get for you:
j...@jojo-laptop:~$ lspci -vvnn
00:00.0 Host bridge [0600]: ALi Corporation M1647 Northbridge [MAGiK 1 /
MobileMAGiK 1] [10b9:1647] (rev 04)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 0
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-ali
Kernel modules: ali-agp
00:01.0 PCI bridge [0604]: ALi Corporation PCI to AGP Controller [10b9:5247]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: e8100000-edffffff
Prefetchable memory behind bridge: 40000000-400fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:02.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller [10b9:5237]
(rev 03) (prog-if 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (20000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at fff70000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
00:04.0 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus
Controller [104c:ac51]
Subsystem: Hewlett-Packard Company Device [103c:0018]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40120000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 30000000-33fff000 (prefetchable)
Memory window 1: 34000000-37fff000
I/O window 0: 00001400-000014ff
I/O window 1: 00001800-000018ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:04.1 CardBus bridge [0607]: Texas Instruments PCI1420 PC card Cardbus
Controller [104c:ac51]
Subsystem: Hewlett-Packard Company Device [103c:0018]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 40121000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=06, subordinate=09, sec-latency=176
Memory window 0: 38000000-3bfff000 (prefetchable)
Memory window 1: 3c000000-3ffff000
I/O window 0: 00001c00-00001cff
I/O window 1: 00002000-000020ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:06.0 Bridge [0680]: ALi Corporation M7101 Power Management Controller [PMU]
[10b9:7101]
Subsystem: ALi Corporation M7101 Power Management Controller [PMU]
[10b9:7101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: ali1535_smbus
Kernel modules: alim7101_wdt, i2c-ali15x3, i2c-ali1535
00:07.0 ISA bridge [0601]: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge
[Aladdin IV/V/V+] [10b9:1533]
Subsystem: ALi Corporation M1533/M1535/M1543 PCI to ISA Bridge [Aladdin
IV/V/V+] [10b9:1533]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: alim7101_wdt, alim1535_wdt
00:08.0 Multimedia audio controller [0401]: ESS Technology ES1988 Allegro-1
[125d:1988] (rev 12)
Subsystem: Hewlett-Packard Company Device [103c:0018]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 6000ns max)
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 8400 [size=256]
Capabilities: <access denied>
Kernel driver in use: Maestro3
Kernel modules: snd-maestro3
00:08.1 Communication controller [0780]: ESS Technology ESS Modem [125d:1989]
(rev 12)
Subsystem: Hewlett-Packard Company Device [103c:0018]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at 8800 [size=256]
Capabilities: <access denied>
00:0f.0 IDE interface [0101]: ALi Corporation M5229 IDE [10b9:5229] (rev c4)
(prog-if 8a [Master SecP PriP])
Subsystem: ALi Corporation M5229 IDE [10b9:5229]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 255
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 1000 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_ali
00:10.0 Ethernet controller [0200]: Accton Technology Corporation EN-1216
Ethernet Adapter [1113:1216] (rev 11)
Subsystem: Accton Technology Corporation Device [1113:2242]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (63750ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 8c00 [size=256]
Region 1: Memory at e8001000 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at 40100000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: tulip
Kernel modules: tulip
01:00.0 VGA compatible controller [0300]: Trident Microsystems CyberBlade/XP
[1023:9910] (rev 63)
Subsystem: Hewlett-Packard Company Device [103c:0018]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 11
Region 0: Memory at ec000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e8400000 (32-bit, non-prefetchable) [size=4M]
Region 2: Memory at ea000000 (32-bit, non-prefetchable) [size=32M]
Region 3: Memory at e8100000 (32-bit, non-prefetchable) [size=32K]
[virtual] Expansion ROM at 40000000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel modules: tridentfb
06:00.0 Network controller [0280]: RaLink RT2561/RT61 802.11g PCI [1814:0301]
Subsystem: RaLink Device [1814:2561]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 3c000000 (32-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
Kernel driver in use: rt61pci
Kernel modules: rt61pci
I'm very green to the whole ubuntu troubleshooting process so please explain
any additional troubleshooting steps in simplified steps for me. Thanks!! -Jenn
Also of note, I ran into an issue with screen resolution but was able to
resolve it through the forums:
https://answers.launchpad.net/ubuntu/+source/screen-resolution-
extra/+question/51359
--
Harware Acceration cannot be activated on Trident Cyberblade XP / No enhanced
visual effects
https://bugs.launchpad.net/bugs/232491
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xserver-xorg-video-trident in ubuntu.
_______________________________________________
Mailing list: https://launchpad.net/~ubuntu-x-swat
Post to : ubuntu-x-swat@lists.launchpad.net
Unsubscribe : https://launchpad.net/~ubuntu-x-swat
More help : https://help.launchpad.net/ListHelp
