sorry here is dmesg
[ 0.000000] HighMem zone: 30274 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 3f000000 (gap: 3f000000:bfcf0000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c17e4000, static data 35036 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 255723 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-9-generic root=UUID=90a569eb-a4db-4e50-bae7-a56ad1b651b7 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 5156780 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:0003ef2f) [ 0.000000] Memory: 1001480k/1031356k available (4532k kernel code, 28904k reserved, 2120k data, 536k init, 122052k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc0780000 - 0xc0806000 ( 536 kB) [ 0.000000] .data : 0xc056d334 - 0xc077f568 (2120 kB) [ 0.000000] .text : 0xc0100000 - 0xc056d334 (4532 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:424 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2660.110 MHz processor. [ 0.001389] Console: colour VGA+ 80x25 [ 0.001395] console [tty0] enabled [ 0.001456] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.22 BogoMIPS (lpj=10640440) [ 0.001490] Security Framework initialized [ 0.001519] AppArmor: AppArmor initialized [ 0.001530] Mount-cache hash table entries: 512 [ 0.001729] Initializing cgroup subsys ns [ 0.001739] Initializing cgroup subsys cpuacct [ 0.001744] Initializing cgroup subsys memory [ 0.001754] Initializing cgroup subsys freezer [ 0.001757] Initializing cgroup subsys net_cls [ 0.001783] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 0.001787] CPU: L2 cache: 256K [ 0.001791] CPU: Hyper-Threading is disabled [ 0.001796] using mwait in idle threads. [ 0.001808] Performance Counters: no PMU driver, software counters only. [ 0.001818] Checking 'hlt' instruction... OK. [ 0.017115] SMP alternatives: switching to UP code [ 0.028020] ACPI: Core revision 20090521 [ 0.039215] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078911] CPU0: Intel(R) Celeron(R) CPU 2.66GHz stepping 04 [ 0.080001] Brought up 1 CPUs [ 0.080001] Total of 1 processors activated (5320.22 BogoMIPS). [ 0.080001] CPU0 attaching NULL sched-domain. [ 0.080001] Booting paravirtualized kernel on bare hardware [ 0.080001] regulator: core version 0.5 [ 0.080001] Time: 19:03:57 Date: 09/10/09 [ 0.080001] NET: Registered protocol family 16 [ 0.080001] EISA bus registered [ 0.080001] ACPI: bus type pci registered [ 0.080290] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1 [ 0.080293] PCI: Using configuration type 1 for base access [ 0.091402] bio: create slab <bio-0> at 0 [ 0.092456] ACPI: EC: Look up EC in DSDT [ 0.100408] ACPI: Interpreter enabled [ 0.100420] ACPI: (supports S0 S1 S4 S5) [ 0.100454] ACPI: Using IOAPIC for interrupt routing [ 0.112834] ACPI: Power Resource [URP1] (off) [ 0.112887] ACPI: Power Resource [FDDP] (off) [ 0.112935] ACPI: Power Resource [LPTP] (off) [ 0.113290] ACPI: No dock devices found. [ 0.113495] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.113670] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 0.113685] pci 0000:00:00.0: reg 10 32bit mmio: [0xf8000000-0xfbffffff] [ 0.113770] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] [ 0.113778] pci 0000:00:02.0: reg 14 32bit mmio: [0xffa00000-0xffa7ffff] [ 0.113786] pci 0000:00:02.0: reg 18 io port: [0xec00-0xec07] [ 0.113849] pci 0000:00:06.0: reg 10 32bit mmio: [0xfecf0000-0xfecf0fff] [ 0.113955] pci 0000:00:1d.0: reg 20 io port: [0xc800-0xc81f] [ 0.114016] pci 0000:00:1d.1: reg 20 io port: [0xcc00-0xcc1f] [ 0.114076] pci 0000:00:1d.2: reg 20 io port: [0xd000-0xd01f] [ 0.114136] pci 0000:00:1d.3: reg 20 io port: [0xd400-0xd41f] [ 0.114205] pci 0000:00:1d.7: reg 10 32bit mmio: [0xffa80000-0xffa803ff] [ 0.114269] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.114275] pci 0000:00:1d.7: PME# disabled [ 0.114375] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.114383] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 0.114388] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH4 GPIO [ 0.114417] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.114425] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.114433] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.114442] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.114450] pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf] [ 0.114458] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.114494] pci 0000:00:1f.2: reg 10 io port: [0xe800-0xe807] [ 0.114502] pci 0000:00:1f.2: reg 14 io port: [0xe400-0xe403] [ 0.114510] pci 0000:00:1f.2: reg 18 io port: [0xe000-0xe007] [ 0.114517] pci 0000:00:1f.2: reg 1c io port: [0xdc00-0xdc03] [ 0.114525] pci 0000:00:1f.2: reg 20 io port: [0xd800-0xd80f] [ 0.114584] pci 0000:00:1f.3: reg 20 io port: [0xc400-0xc41f] [ 0.114649] pci 0000:00:1f.5: reg 18 32bit mmio: [0xffa80400-0xffa805ff] [ 0.114658] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xffa80800-0xffa808ff] [ 0.114692] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.114697] pci 0000:00:1f.5: PME# disabled [ 0.114754] pci 0000:01:08.0: reg 10 32bit mmio: [0xff900000-0xff900fff] [ 0.114762] pci 0000:01:08.0: reg 14 io port: [0xbc00-0xbc3f] [ 0.114805] pci 0000:01:08.0: supports D1 D2 [ 0.114808] pci 0000:01:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.114813] pci 0000:01:08.0: PME# disabled [ 0.114849] pci 0000:00:1e.0: transparent bridge [ 0.114854] pci 0000:00:1e.0: bridge io port: [0xb000-0xbfff] [ 0.114860] pci 0000:00:1e.0: bridge 32bit mmio: [0xff900000-0xff9fffff] [ 0.114873] pci_bus 0000:00: on NUMA node 0 [ 0.114886] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.115017] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 0.119679] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) [ 0.119884] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15) [ 0.120119] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) [ 0.120320] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) [ 0.120519] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.120720] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.120917] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled. [ 0.121116] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) [ 0.122121] SCSI subsystem initialized [ 0.122197] libata version 3.00 loaded. [ 0.122674] usbcore: registered new interface driver usbfs [ 0.122778] usbcore: registered new interface driver hub [ 0.122901] usbcore: registered new device driver usb [ 0.123816] ACPI: WMI: Mapper loaded [ 0.123821] PCI: Using ACPI for IRQ routing [ 0.124249] Bluetooth: Core ver 2.15 [ 0.124391] NET: Registered protocol family 31 [ 0.124395] Bluetooth: HCI device and connection manager initialized [ 0.124399] Bluetooth: HCI socket layer initialized [ 0.124403] NetLabel: Initializing [ 0.124405] NetLabel: domain hash size = 128 [ 0.124408] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.124433] NetLabel: unlabeled traffic allowed by default [ 0.124718] hpet clockevent registered [ 0.124723] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.124730] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.124738] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.130636] pnp: PnP ACPI init [ 0.130673] ACPI: bus type pnp registered [ 0.137628] pnp: PnP ACPI: found 13 devices [ 0.137635] ACPI: ACPI bus type pnp unregistered [ 0.137641] PnPBIOS: Disabled by ACPI PNP [ 0.137670] system 00:09: ioport range 0x4d0-0x4d1 has been reserved [ 0.137681] system 00:0b: ioport range 0x400-0x47f has been reserved [ 0.137685] system 00:0b: ioport range 0x680-0x6ff has been reserved [ 0.137689] system 00:0b: ioport range 0x500-0x53f has been reserved [ 0.137694] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.137700] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.137704] system 00:0b: iomem range 0xfed20000-0xfed9ffff has been reserved [ 0.137714] system 00:0c: iomem range 0x0-0x9ffff could not be reserved [ 0.137718] system 00:0c: iomem range 0xc0000-0xd7fff could not be reserved [ 0.137722] system 00:0c: iomem range 0xe0000-0xfffff could not be reserved [ 0.137726] system 00:0c: iomem range 0x100000-0x3effffff could not be reserved [ 0.173333] AppArmor: AppArmor Filesystem Enabled [ 0.173373] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:01 [ 0.173378] pci 0000:00:1e.0: IO window: 0xb000-0xbfff [ 0.173385] pci 0000:00:1e.0: MEM window: 0xff900000-0xff9fffff [ 0.173390] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.173408] pci 0000:00:1e.0: setting latency timer to 64 [ 0.173417] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.173421] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.173425] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff] [ 0.173428] pci_bus 0000:01: resource 1 mem: [0xff900000-0xff9fffff] [ 0.173431] pci_bus 0000:01: resource 3 io: [0x00-0xffff] [ 0.173434] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] [ 0.173496] NET: Registered protocol family 2 [ 0.173635] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.174141] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.175230] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.175810] TCP: Hash tables configured (established 131072 bind 65536) [ 0.175817] TCP reno registered [ 0.176055] NET: Registered protocol family 1 [ 0.176159] Trying to unpack rootfs image as initramfs... [ 0.438011] Freeing initrd memory: 7055k freed [ 0.447968] cpufreq-nforce2: No nForce2 chipset. [ 0.448249] Scanning for low memory corruption every 60 seconds [ 0.448783] audit: initializing netlink socket (disabled) [ 0.448806] type=2000 audit(1252609437.447:1): initialized [ 0.459031] highmem bounce pool size: 64 pages [ 0.459040] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.464261] VFS: Disk quotas dquot_6.5.2 [ 0.464989] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.466955] fuse init (API version 7.12) [ 0.467365] msgmni has been set to 1732 [ 0.467819] alg: No test for stdrng (krng) [ 0.467843] io scheduler noop registered [ 0.467846] io scheduler anticipatory registered [ 0.467849] io scheduler deadline registered [ 0.468074] io scheduler cfq registered (default) [ 0.468099] pci 0000:00:02.0: Boot video device [ 0.468195] pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling [ 0.468569] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.468809] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.469449] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.469456] ACPI: Power Button [PWRF] [ 0.469648] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.469658] ACPI: Sleep Button [SLPB] [ 0.470209] processor LNXCPU:00: registered as cooling_device0 [ 0.470217] ACPI: Processor [CPU0] (supports 8 throttling states) [ 0.473381] isapnp: Scanning for PnP cards... [ 0.628003] Switched to high resolution mode on CPU 0 [ 0.827389] isapnp: No Plug & Play device found [ 0.834695] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.834905] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.835896] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.840240] brd: module loaded [ 0.842230] loop: module loaded [ 0.842612] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 0.843208] ata_piix 0000:00:1f.1: version 2.13 [ 0.843227] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) [ 0.843240] alloc irq_desc for 18 on node -1 [ 0.843243] alloc kstat_irqs on node -1 [ 0.843252] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.843309] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 0.843428] scsi0 : ata_piix [ 0.843752] scsi1 : ata_piix [ 0.845564] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 0.845569] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 0.845612] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.845620] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 0.845682] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.845925] scsi2 : ata_piix [ 0.846375] scsi3 : ata_piix [ 0.847699] ata3: SATA max UDMA/133 cmd 0xe800 ctl 0xe400 bmdma 0xd800 irq 18 [ 0.847704] ata4: SATA max UDMA/133 cmd 0xe000 ctl 0xdc00 bmdma 0xd808 irq 18 [ 0.853379] Fixed MDIO Bus: probed [ 0.853389] PPP generic driver version 2.4.2 [ 0.853862] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.853924] alloc irq_desc for 23 on node -1 [ 0.853928] alloc kstat_irqs on node -1 [ 0.853939] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.853960] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.853965] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.854138] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.858052] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.858061] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 0.858086] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80000 [ 0.872013] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.872289] usb usb1: configuration #1 chosen from 1 choice [ 0.872419] hub 1-0:1.0: USB hub found [ 0.872438] hub 1-0:1.0: 8 ports detected [ 0.872622] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.872745] uhci_hcd: USB Universal Host Controller Interface driver [ 0.872825] alloc irq_desc for 16 on node -1 [ 0.872828] alloc kstat_irqs on node -1 [ 0.872839] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.872851] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.872855] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.873025] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.873070] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000c800 [ 0.873307] usb usb2: configuration #1 chosen from 1 choice [ 0.873437] hub 2-0:1.0: USB hub found [ 0.873456] hub 2-0:1.0: 2 ports detected [ 0.873533] alloc irq_desc for 19 on node -1 [ 0.873537] alloc kstat_irqs on node -1 [ 0.873546] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.873556] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.873561] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.873736] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.873780] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00 [ 0.874014] usb usb3: configuration #1 chosen from 1 choice [ 0.874137] hub 3-0:1.0: USB hub found [ 0.874154] hub 3-0:1.0: 2 ports detected [ 0.874235] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.874247] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.874251] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.874431] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.874465] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000 [ 0.874694] usb usb4: configuration #1 chosen from 1 choice [ 0.874819] hub 4-0:1.0: USB hub found [ 0.874837] hub 4-0:1.0: 2 ports detected [ 0.874916] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.874927] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.874931] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.875092] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.875125] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400 [ 0.875347] usb usb5: configuration #1 chosen from 1 choice [ 0.875469] hub 5-0:1.0: USB hub found [ 0.875485] hub 5-0:1.0: 2 ports detected [ 0.875849] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.875853] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.876549] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.877022] mice: PS/2 mouse device common for all mice [ 0.877501] rtc_cmos 00:02: RTC can wake from S4 [ 0.877686] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 0.877720] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.878160] device-mapper: uevent: version 1.0.3 [ 0.878502] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 0.878610] device-mapper: multipath: version 1.1.0 loaded [ 0.878616] device-mapper: multipath round-robin: version 1.0.0 loaded [ 0.879091] EISA: Probing bus 0 at eisa.0 [ 0.879132] EISA: Detected 0 cards. [ 0.879209] cpuidle: using governor ladder [ 0.879213] cpuidle: using governor menu [ 0.880362] TCP cubic registered [ 0.880925] NET: Registered protocol family 10 [ 0.881577] lo: Disabled Privacy Extensions [ 0.882037] NET: Registered protocol family 17 [ 0.882200] Bluetooth: L2CAP ver 2.13 [ 0.882204] Bluetooth: L2CAP socket layer initialized [ 0.882208] Bluetooth: SCO (Voice Link) ver 0.6 [ 0.882210] Bluetooth: SCO socket layer initialized [ 0.882257] Bluetooth: RFCOMM TTY layer initialized [ 0.882262] Bluetooth: RFCOMM socket layer initialized [ 0.882265] Bluetooth: RFCOMM ver 1.11 [ 0.882302] Using IPI No-Shortcut mode [ 0.882731] PM: Resume from disk failed. [ 0.882756] registered taskstats version 1 [ 0.882889] Magic number: 9:298:91 [ 0.882997] rtc_cmos 00:02: setting system clock to 2009-09-10 19:03:58 UTC (1252609438) [ 0.883002] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.883004] EDD information not available. [ 0.903929] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.022666] ata2.00: ATAPI: HL-DT-ST RW/DVD GCC-4480B, 1.12, max UDMA/44 [ 1.023042] ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 [ 1.023046] ata1.00: 160086528 sectors, multi 16: LBA [ 1.036342] ata2.00: configured for UDMA/44 [ 1.036630] ata1.00: configured for UDMA/100 [ 1.036806] scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 [ 1.037356] sd 0:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB) [ 1.037434] sd 0:0:0:0: [sda] Write Protect is off [ 1.037439] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.037478] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.037708] sda: [ 1.038088] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.038759] scsi 1:0:0:0: CD-ROM HL-DT-ST RW/DVD GCC-4480B 1.12 PQ: 0 ANSI: 5 [ 1.040988] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 1.040995] Uniform CD-ROM driver Revision: 3.20 [ 1.041316] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.041575] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.046718] sda1 sda2 < sda5 > [ 1.066401] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.066427] Freeing unused kernel memory: 536k freed [ 1.067102] Write protecting the kernel text: 4536k [ 1.067138] Write protecting the kernel read-only data: 1824k [ 1.212314] Linux agpgart interface v0.103 [ 1.216557] agpgart-intel 0000:00:00.0: Intel 865 Chipset [ 1.216734] agpgart-intel 0000:00:00.0: detected 16252K stolen memory [ 1.218789] agpgart-intel 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [ 1.251429] [drm] Initialized drm 1.1.0 20060810 [ 1.270070] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.270080] i915 0000:00:02.0: setting latency timer to 64 [ 1.367658] [drm] DAC-5: set mode 640x480 0 [ 1.787427] usb 2-1: new low speed USB device using uhci_hcd and address 2 [ 1.791883] i2c-adapter i2c-0: unable to read EDID block. [ 1.791888] i915 0000:00:02.0: VGA-1: no EDID data [ 1.791892] [drm:drm_helper_initial_config] *ERROR* connectors have no modes, using standard modes [ 1.795195] [drm] fb0: inteldrmfb frame buffer device [ 1.795210] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 1.882941] render error detected, EIR: 0x00000010 [ 1.882947] [drm:i915_handle_error] *ERROR* EIR stuck: 0x00000010, masking [ 1.882955] render error detected, EIR: 0x00000010 [ 1.889440] [drm] DAC-5: set mode 800x600 8 [ 1.891631] Console: switching to colour frame buffer device 100x37 [ 1.988180] usb 2-1: configuration #1 chosen from 1 choice [ 2.171140] Floppy drive(s): fd0 is 1.44M [ 2.217526] FDC 0 is a National Semiconductor PC87306 [ 2.244205] usbcore: registered new interface driver hiddev [ 2.260766] input: A4Tech Wireless Battery Free Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4 [ 2.260912] generic-usb 0003:09DA:032B.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech Wireless Battery Free Optical Mouse] on usb-0000:00:1d.0-1/input0 [ 2.260944] usbcore: registered new interface driver usbhid [ 2.260948] usbhid: v2.6:USB HID core driver [ 2.358754] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.358760] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.358833] alloc irq_desc for 20 on node -1 [ 2.358837] alloc kstat_irqs on node -1 [ 2.358847] e100 0000:01:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.382378] e100 0000:01:08.0: PME# disabled [ 2.443507] e100: eth0: e100_probe: addr 0xff900000, irq 20, MAC addr 00:13:20:41:76:cd [ 3.041678] PM: Starting manual resume from disk [ 3.041684] PM: Resume from partition 8:5 [ 3.041687] PM: Checking hibernation image. [ 3.041945] PM: Resume from disk failed. [ 3.064183] EXT4-fs (sda1): barriers enabled [ 3.081405] kjournald2 starting: pid 1006, dev sda1:8, commit interval 5 seconds [ 3.081435] EXT4-fs (sda1): delayed allocation enabled [ 3.081441] EXT4-fs: file extents enabled [ 3.093486] EXT4-fs: mballoc enabled [ 3.093519] EXT4-fs (sda1): mounted filesystem with ordered data mode [ 4.798645] udev: starting version 146 [ 5.131734] intel_rng: Firmware space is locked read-only. If you can't or [ 5.131737] intel_rng: don't want to disable this in firmware setup, and if [ 5.131739] intel_rng: you are certain that your system has a functional [ 5.131741] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 5.356439] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 5.580242] parport_pc 00:08: reported by Plug and Play ACPI [ 5.580299] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 5.750012] ppdev: user-space parallel port driver [ 7.236459] alloc irq_desc for 17 on node -1 [ 7.236465] alloc kstat_irqs on node -1 [ 7.236476] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 7.236528] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 7.664020] intel8x0_measure_ac97_clock: measured 55966 usecs (2696 samples) [ 7.664025] intel8x0: clocking to 48000 [ 8.410340] lp0: using parport0 (interrupt-driven). [ 9.188350] Adding 2955920k swap on /dev/sda5. Priority:-1 extents:1 across:2955920k [ 9.894931] EXT4-fs (sda1): internal journal on sda1:8 [ 11.668081] type=1505 audit(1252609449.285:2): operation="profile_load" pid=1804 name=/usr/share/gdm/guest-session/Xsession [ 11.866340] type=1505 audit(1252609449.481:3): operation="profile_load" pid=1805 name=/sbin/dhclient3 [ 11.866654] type=1505 audit(1252609449.481:4): operation="profile_load" pid=1805 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 11.866849] type=1505 audit(1252609449.481:5): operation="profile_load" pid=1805 name=/usr/lib/connman/scripts/dhclient-script [ 12.236371] type=1505 audit(1252609449.853:6): operation="profile_load" pid=1806 name=/usr/lib/cups/backend/cups-pdf [ 12.236786] type=1505 audit(1252609449.853:7): operation="profile_load" pid=1806 name=/usr/sbin/cupsd [ 12.342391] type=1505 audit(1252609449.957:8): operation="profile_load" pid=1807 name=/usr/sbin/tcpdump [ 21.502963] type=1505 audit(1252609459.117:9): operation="profile_load" pid=1808 name=/usr/bin/evince [ 21.508574] type=1505 audit(1252609459.125:10): operation="profile_load" pid=1808 name=/usr/bin/evince-previewer [ 21.510292] type=1505 audit(1252609459.125:11): operation="profile_load" pid=1808 name=/usr/bin/evince-thumbnailer [ 30.397658] i2c-adapter i2c-0: unable to read EDID block. [ 30.397665] i915 0000:00:02.0: VGA-1: no EDID data -- Low screen resolution using Ubuntu 9.10 Alpha 3, Alpha 4, and Alpha 5 https://bugs.launchpad.net/bugs/408588 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to xserver-xorg-video-intel in ubuntu. _______________________________________________ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
