Public bug reported:

ubuntu jammy daily (canary build) live test on 
- dell optiplex 960

(this is my primary machine; so is normally used for entry of data & not
doing the QA-testing).

on adjusting the displays to match my setup (six displays; two high &
three across; this box uses two in the middle with middle on top row &
middle on bottom row)..  the top display is still useable, but the
bottom is not.  This boxes are not perfectly aligned as not all my
displays are the exact same size; so top display is slightly to right of
bottom display

the bottom resembles a digital TV with bad signal, mostly blocky & parts
of it flashing (very quickly).  it doesn't match the attached picture
(as viewable on this box anyway.. my top display; which was LEFT prior
to alignment is perfectly readable).

** actual

my top display is usable, bottom is not (blocky warped picture)

** expected

on adjust displays to match my config; both displays remain usable &
readable.

** notes

likely related to graphics card & not GNOME.   If I recall correctly;
this box has an older video card used as it had 2x DVI connections my
screens use.

My usual install on this box is jammy; but I usually use LXQt/Lubuntu
and I don't experience issues.. I also have installed Xubuntu/Xfce &
Ubuntu/GNOME so can test the installed OS (where I don't believe I have
issue), but my install is somewhat old (artful install upgraded every
six months ~30-36 hours after each release) thus is likely heavily
modified.

** Picture comments

My top display is ~perfect (vertical white bar to left of ubuntu-dock-
items I'd not expect, but the color-blocks to the left of the
'install/firefox/thunderbird/files` is NOT visible; only a vertical
WHITE bar a few pixels wide to left of the dock appears' rest of top
display is perfect.

My bottom display is nothing like picture; it's unusable.  A mixture of
black/white boxes with red/purple bits which would be the picture warped
into blocky-components.  When I type, I get reactions on this display
with the picture changing (mostly the black & white portions which
flash, the red/purple bits which are warped indri picture appear to
remain static).

My phone/camera isn't working, but I've taken a photograph. I didn't
anticipate issues in this QA-test (it's past 1AM now) otherwise I'd not
have run this QA-test now.

** further comments

this is likely a duplicate... I experience this type of reaction on
other boxes; likely radeon related but I've yet to look & can't even
remember which video card exists in this box (I don't experience issues
with the display configuration of the box with identical card to this,
but it relates to display setup/config... my other box with this card is
landscape+portrait I believe and doesn't have one display above the
other; ie. d780; I get these issues when one display is above the other
- and only with single orientation (swap top/bottom and issues don't
exist))

ProblemType: Bug
DistroRelease: Ubuntu 22.04
Package: xorg 1:7.7+23ubuntu1
ProcVersionSignature: Ubuntu 5.13.0-19.19-generic 5.13.14
Uname: Linux 5.13.0-19-generic x86_64
NonfreeKernelModules: zfs zunicode zavl icp zcommon znvpair
ApportVersion: 2.20.11-0ubuntu74
Architecture: amd64
BootLog: Error: [Errno 13] Permission denied: '/var/log/boot.log'
CasperMD5CheckResult: pass
CasperVersion: 1.465+canary3.3
CompositorRunning: None
CurrentDesktop: ubuntu:GNOME
Date: Tue Dec  7 13:52:56 2021
DistUpgraded: Fresh install
DistroCodename: jammy
DistroVariant: ubuntu
ExtraDebuggingInterest: Yes, if not too technical
GraphicsCard:
 Advanced Micro Devices, Inc. [AMD/ATI] Cedar [Radeon HD 5000/6000/7350/8350 
Series] [1002:68f9] (prog-if 00 [VGA controller])
   Subsystem: Hewlett-Packard Company Radeon HD 6350 [103c:2126]
LiveMediaBuild: Ubuntu 22.04 LTS "Jammy Jellyfish" - Alpha amd64 (20211206)
MachineType: Dell Inc. OptiPlex 960
ProcEnviron:
 TERM=xterm-256color
 PATH=(custom, no user)
 XDG_RUNTIME_DIR=<set>
 LANG=C.UTF-8
 SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=/casper/vmlinuz 
layerfs-path=minimal.standard.live.squashfs maybe-ubiquity --- quiet splash
SourcePackage: xorg
Symptom: display
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 12/05/2011
dmi.bios.release: 10.0
dmi.bios.vendor: Dell Inc.
dmi.bios.version: A14
dmi.board.name: 0F428D
dmi.board.vendor: Dell Inc.
dmi.board.version: A00
dmi.chassis.asset.tag: 1701283234
dmi.chassis.type: 3
dmi.chassis.vendor: Dell Inc.
dmi.modalias: 
dmi:bvnDellInc.:bvrA14:bd12/05/2011:br10.0:svnDellInc.:pnOptiPlex960:pvr:sku:rvnDellInc.:rn0F428D:rvrA00:cvnDellInc.:ct3:cvr:
dmi.product.name: OptiPlex 960
dmi.sys.vendor: Dell Inc.
version.compiz: compiz N/A
version.libdrm2: libdrm2 2.4.107-8ubuntu1
version.libgl1-mesa-dri: libgl1-mesa-dri 21.2.2-1ubuntu1
version.libgl1-mesa-glx: libgl1-mesa-glx N/A
version.xserver-xorg-core: xserver-xorg-core 2:1.20.13-1ubuntu1
version.xserver-xorg-input-evdev: xserver-xorg-input-evdev N/A
version.xserver-xorg-video-ati: xserver-xorg-video-ati 1:19.1.0-2build1
version.xserver-xorg-video-intel: xserver-xorg-video-intel 
2:2.99.917+git20200714-1ubuntu2
version.xserver-xorg-video-nouveau: xserver-xorg-video-nouveau 1:1.0.17-1build1

** Affects: xorg (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: amd64 apport-bug corruption jammy single-occurrence ubuntu uec-images

** Attachment added: "Screenshot from 2021-12-07 13-47-41.png"
   
https://bugs.launchpad.net/bugs/1953507/+attachment/5545992/+files/Screenshot%20from%202021-12-07%2013-47-41.png

-- 
You received this bug notification because you are a member of Ubuntu-X,
which is subscribed to xorg in Ubuntu.
https://bugs.launchpad.net/bugs/1953507

Title:
  jammy live - on adjusting display config; one display is unsuable
  blocky-mess

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/xorg/+bug/1953507/+subscriptions


_______________________________________________
Mailing list: https://launchpad.net/~ubuntu-x-swat
Post to     : ubuntu-x-swat@lists.launchpad.net
Unsubscribe : https://launchpad.net/~ubuntu-x-swat
More help   : https://help.launchpad.net/ListHelp

Reply via email to