Hi, I have the same problem here on an HP dv3500 laptop.
Here is my ouput of "dmesg">> [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-14-generic (bui...@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable) [ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bcbbc000 (usable) [ 0.000000] BIOS-e820: 00000000bcbbc000 - 00000000bcbbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bcbbf000 - 00000000bde6b000 (usable) [ 0.000000] BIOS-e820: 00000000bde6b000 - 00000000bdebf000 (reserved) [ 0.000000] BIOS-e820: 00000000bdebf000 - 00000000bdf86000 (usable) [ 0.000000] BIOS-e820: 00000000bdf86000 - 00000000bdfbf000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bdfbf000 - 00000000bdfe1000 (usable) [ 0.000000] BIOS-e820: 00000000bdfe1000 - 00000000bdff6000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bdff6000 - 00000000be000000 (usable) [ 0.000000] BIOS-e820: 00000000be000000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0xbe000 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-CFFFF uncachable [ 0.000000] D0000-DFFFF write-protect [ 0.000000] E0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0BE000000 mask FFE000000 uncachable [ 0.000000] 3 base 100000000 mask FC0000000 write-back [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 base 0FFF00000 mask FFFF00000 write-protect [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved) [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable) [ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved) [ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable) [ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 00000000bcbbc000 (usable) [ 0.000000] modified: 00000000bcbbc000 - 00000000bcbbf000 (ACPI NVS) [ 0.000000] modified: 00000000bcbbf000 - 00000000bde6b000 (usable) [ 0.000000] modified: 00000000bde6b000 - 00000000bdebf000 (reserved) [ 0.000000] modified: 00000000bdebf000 - 00000000bdf86000 (usable) [ 0.000000] modified: 00000000bdf86000 - 00000000bdfbf000 (ACPI NVS) [ 0.000000] modified: 00000000bdfbf000 - 00000000bdfe1000 (usable) [ 0.000000] modified: 00000000bdfe1000 - 00000000bdff6000 (ACPI data) [ 0.000000] modified: 00000000bdff6000 - 00000000be000000 (usable) [ 0.000000] modified: 00000000be000000 - 00000000c0000000 (reserved) [ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved) [ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved) [ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable) [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] Using x86 segment limits to approximate NX protection [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 378a4000 - 37fef2a8 [ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff82a8 [ 0.000000] Move RAMDISK from 00000000378a4000 - 0000000037fef2a7 to 008ad000 - 00ff82a7 [ 0.000000] ACPI: RSDP 000fe020 00024 (v02 HP ) [ 0.000000] ACPI: XSDT bdff5120 00064 (v01 HPQOEM SLIC-MPC 00000001 01000013) [ 0.000000] ACPI: FACP bdfe2000 000F4 (v04 HP DIABLO 00000001 MSFT 01000013) [ 0.000000] ACPI: DSDT bdfe5000 0A602 (v01 HP DIABLO 00000001 MSFT 01000013) [ 0.000000] ACPI: FACS bdf92000 00040 [ 0.000000] ACPI: HPET bdff3000 00038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: APIC bdff2000 0006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: MCFG bdff1000 0003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: ASF! bdff0000 000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SLIC bdfe4000 00176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 00000000) [ 0.000000] ACPI: BOOT bdfe3000 00028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) [ 0.000000] ACPI: SSDT bdfe1000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2152MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [00008a9000 - 00008ac1d4] BRK ==> [00008a9000 - 00008ac1d4] [ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #7 [00008ad000 - 0000ff82a8] NEW RAMDISK ==> [00008ad000 - 0000ff82a8] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x000be000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[7] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x00000002 [ 0.000000] 0: 0x00000006 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000bcbbc [ 0.000000] 0: 0x000bcbbf -> 0x000bde6b [ 0.000000] 0: 0x000bdebf -> 0x000bdf86 [ 0.000000] 0: 0x000bdfbf -> 0x000bdfe1 [ 0.000000] 0: 0x000bdff6 -> 0x000be000 [ 0.000000] On node 0 totalpages: 777973 [ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3962 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4305 pages used for memmap [ 0.000000] HighMem zone: 546444 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:38000000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 14 pages at c27d0000, static data 35612 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 771892 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=3f5a99e6-644e-4440-8754-6c3b99871653 ro quiet splash [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 15564800 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (000377fe:000be000) [ 0.000000] Memory: 3055068k/3112960k available (4565k kernel code, 55960k reserved, 2143k data, 540k init, 2202996k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB) [ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB) [ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] NR_IRQS:2304 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1995.077 MHz processor. [ 0.002807] Console: colour VGA+ 80x25 [ 0.002810] console [tty0] enabled [ 0.002972] hpet clockevent registered [ 0.002977] HPET: 4 timers in total, 0 timers will be used for per-cpu timer [ 0.002982] Calibrating delay loop (skipped), value calculated using timer frequency.. 3990.15 BogoMIPS (lpj=7980308) [ 0.002998] Security Framework initialized [ 0.003017] AppArmor: AppArmor initialized [ 0.003024] Mount-cache hash table entries: 512 [ 0.003143] Initializing cgroup subsys ns [ 0.003148] Initializing cgroup subsys cpuacct [ 0.003152] Initializing cgroup subsys memory [ 0.003158] Initializing cgroup subsys freezer [ 0.003160] Initializing cgroup subsys net_cls [ 0.003175] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.003177] CPU: L2 cache: 3072K [ 0.003180] CPU: Physical Processor ID: 0 [ 0.003182] CPU: Processor Core ID: 0 [ 0.003185] mce: CPU supports 6 MCE banks [ 0.003193] CPU0: Thermal monitoring enabled (TM1) [ 0.003197] using mwait in idle threads. [ 0.003202] Performance Counters: Core2 events, Intel PMU driver. [ 0.003210] ... version: 2 [ 0.003212] ... bit width: 40 [ 0.003213] ... generic counters: 2 [ 0.003215] ... value mask: 000000ffffffffff [ 0.003217] ... max period: 000000007fffffff [ 0.003219] ... fixed-purpose counters: 3 [ 0.003220] ... counter mask: 0000000700000003 [ 0.003224] Checking 'hlt' instruction... OK. [ 0.018701] ACPI: Core revision 20090521 [ 0.036394] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.078571] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 3990.38 BogoMIPS (lpj=7980778) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 3072K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] mce: CPU supports 6 MCE banks [ 0.004000] CPU1: Thermal monitoring enabled (TM1) [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.165591] CPU1: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06 [ 0.165604] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.168020] Brought up 2 CPUs [ 0.168022] Total of 2 processors activated (7980.54 BogoMIPS). [ 0.168072] CPU0 attaching sched-domain: [ 0.168075] domain 0: span 0-1 level MC [ 0.168077] groups: 0 1 [ 0.168082] CPU1 attaching sched-domain: [ 0.168084] domain 0: span 0-1 level MC [ 0.168087] groups: 1 0 [ 0.168159] Booting paravirtualized kernel on bare hardware [ 0.168206] regulator: core version 0.5 [ 0.168206] Time: 23:05:11 Date: 11/30/09 [ 0.168206] NET: Registered protocol family 16 [ 0.168206] EISA bus registered [ 0.168211] ACPI: bus type pci registered [ 0.168277] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63 [ 0.168280] PCI: MCFG area at f8000000 reserved in E820 [ 0.168282] PCI: Using MMCONFIG for extended config space [ 0.168284] PCI: Using configuration type 1 for base access [ 0.169264] bio: create slab <bio-0> at 0 [ 0.172711] ACPI: EC: Enabling special treatment for EC from MSI. [ 0.172714] ACPI: EC: Look up EC in DSDT [ 0.176368] ACPI: BIOS _OSI(Linux) query ignored [ 0.436016] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.440560] ACPI: Interpreter enabled [ 0.440560] ACPI: (supports S0 S3 S4 S5) [ 0.440560] ACPI: Using IOAPIC for interrupt routing [ 0.453280] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.453280] ACPI: EC: driver started in interrupt mode [ 0.453280] ACPI: Power Resource [FN00] (on) [ 0.454152] ACPI: No dock devices found. [ 0.454657] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.454765] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.454768] pci 0000:00:01.0: PME# disabled [ 0.454882] pci 0000:00:1a.0: reg 20 io port: [0x60e0-0x60ff] [ 0.455008] pci 0000:00:1a.1: reg 20 io port: [0x60c0-0x60df] [ 0.455122] pci 0000:00:1a.7: reg 10 32bit mmio: [0xd9304c00-0xd9304fff] [ 0.455197] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.455202] pci 0000:00:1a.7: PME# disabled [ 0.455257] pci 0000:00:1b.0: reg 10 64bit mmio: [0xd9300000-0xd9303fff] [ 0.455315] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.455319] pci 0000:00:1b.0: PME# disabled [ 0.455392] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.455396] pci 0000:00:1c.0: PME# disabled [ 0.455478] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.455483] pci 0000:00:1c.1: PME# disabled [ 0.455571] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 0.455576] pci 0000:00:1c.5: PME# disabled [ 0.455670] pci 0000:00:1d.0: reg 20 io port: [0x60a0-0x60bf] [ 0.455800] pci 0000:00:1d.1: reg 20 io port: [0x6080-0x609f] [ 0.455931] pci 0000:00:1d.2: reg 20 io port: [0x6060-0x607f] [ 0.456060] pci 0000:00:1d.3: reg 20 io port: [0x6040-0x605f] [ 0.456169] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd9304800-0xd9304bff] [ 0.456244] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.456249] pci 0000:00:1d.7: PME# disabled [ 0.456477] pci 0000:00:1f.2: reg 10 io port: [0x6108-0x610f] [ 0.456485] pci 0000:00:1f.2: reg 14 io port: [0x6114-0x6117] [ 0.456493] pci 0000:00:1f.2: reg 18 io port: [0x6100-0x6107] [ 0.456500] pci 0000:00:1f.2: reg 1c io port: [0x6110-0x6113] [ 0.456508] pci 0000:00:1f.2: reg 20 io port: [0x6020-0x603f] [ 0.456515] pci 0000:00:1f.2: reg 24 32bit mmio: [0xd9304000-0xd93047ff] [ 0.456559] pci 0000:00:1f.2: PME# supported from D3hot [ 0.456564] pci 0000:00:1f.2: PME# disabled [ 0.456602] pci 0000:00:1f.3: reg 10 64bit mmio: [0xd9305000-0xd93050ff] [ 0.456620] pci 0000:00:1f.3: reg 20 io port: [0x6000-0x601f] [ 0.456713] pci 0000:01:00.0: reg 10 32bit mmio: [0xd2000000-0xd2ffffff] [ 0.456731] pci 0000:01:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.456749] pci 0000:01:00.0: reg 1c 64bit mmio: [0xd0000000-0xd1ffffff] [ 0.456760] pci 0000:01:00.0: reg 24 io port: [0x5000-0x507f] [ 0.456770] pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.456889] pci 0000:00:01.0: bridge io port: [0x5000-0x5fff] [ 0.456892] pci 0000:00:01.0: bridge 32bit mmio: [0xd0000000-0xd2ffffff] [ 0.456897] pci 0000:00:01.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.456956] pci 0000:02:00.0: reg 10 io port: [0x3000-0x30ff] [ 0.456981] pci 0000:02:00.0: reg 18 64bit mmio: [0xd8200000-0xd8200fff] [ 0.456998] pci 0000:02:00.0: reg 20 64bit mmio: [0xd3000000-0xd300ffff] [ 0.457009] pci 0000:02:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff] [ 0.457060] pci 0000:02:00.0: supports D1 D2 [ 0.457063] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.457068] pci 0000:02:00.0: PME# disabled [ 0.457147] pci 0000:00:1c.0: bridge io port: [0x3000-0x4fff] [ 0.457152] pci 0000:00:1c.0: bridge 32bit mmio: [0xd8200000-0xd92fffff] [ 0.457160] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd3000000-0xd40fffff] [ 0.457271] pci 0000:03:00.0: reg 10 64bit mmio: [0xd7100000-0xd7101fff] [ 0.457383] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.457394] pci 0000:03:00.0: PME# disabled [ 0.457477] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff] [ 0.457482] pci 0000:00:1c.1: bridge 32bit mmio: [0xd7100000-0xd81fffff] [ 0.457490] pci 0000:00:1c.1: bridge 64bit mmio pref: [0xd4100000-0xd50fffff] [ 0.457548] pci 0000:00:1c.5: bridge io port: [0x1000-0x1fff] [ 0.457553] pci 0000:00:1c.5: bridge 32bit mmio: [0xd6100000-0xd70fffff] [ 0.457561] pci 0000:00:1c.5: bridge 64bit mmio pref: [0xd5100000-0xd60fffff] [ 0.457623] pci 0000:00:1e.0: transparent bridge [ 0.457662] pci_bus 0000:00: on NUMA node 0 [ 0.457669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.457959] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.458037] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.458182] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.458292] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.458392] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] [ 0.472086] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.472214] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12) [ 0.472341] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.472466] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12) [ 0.472593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12) [ 0.472722] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.472850] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 *10 11 12) [ 0.472975] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.473161] SCSI subsystem initialized [ 0.473170] libata version 3.00 loaded. [ 0.473170] usbcore: registered new interface driver usbfs [ 0.473170] usbcore: registered new interface driver hub [ 0.473170] usbcore: registered new device driver usb [ 0.473170] ACPI: WMI: Mapper loaded [ 0.473170] PCI: Using ACPI for IRQ routing [ 0.484008] Bluetooth: Core ver 2.15 [ 0.484013] NET: Registered protocol family 31 [ 0.484014] Bluetooth: HCI device and connection manager initialized [ 0.484017] Bluetooth: HCI socket layer initialized [ 0.484019] NetLabel: Initializing [ 0.484020] NetLabel: domain hash size = 128 [ 0.484022] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.484034] NetLabel: unlabeled traffic allowed by default [ 0.484065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.484071] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 0.501631] Switched to high resolution mode on CPU 1 [ 0.501639] pnp: PnP ACPI init [ 0.501648] ACPI: bus type pnp registered [ 0.504006] Switched to high resolution mode on CPU 0 [ 0.504088] pnp 00:01: io resource (0x164e-0x164f) overlaps 0000:00:1c.5 BAR 13 (0x1000-0x1fff), disabling [ 0.504816] alloc irq_desc for 23 on node -1 [ 0.504819] alloc kstat_irqs on node -1 [ 0.504869] pnp: PnP ACPI: found 11 devices [ 0.504871] ACPI: ACPI bus type pnp unregistered [ 0.504874] PnPBIOS: Disabled by ACPI PNP [ 0.504883] system 00:01: ioport range 0x600-0x60f has been reserved [ 0.504886] system 00:01: ioport range 0x610-0x610 has been reserved [ 0.504889] system 00:01: ioport range 0x800-0x80f has been reserved [ 0.504892] system 00:01: ioport range 0x810-0x817 has been reserved [ 0.504895] system 00:01: ioport range 0x820-0x823 has been reserved [ 0.504897] system 00:01: ioport range 0x400-0x47f has been reserved [ 0.504900] system 00:01: ioport range 0x700-0x73f has been reserved [ 0.504903] system 00:01: ioport range 0x500-0x501 has been reserved [ 0.504907] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved [ 0.504910] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.504913] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved [ 0.504916] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.504919] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.504922] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.504925] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.504928] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved [ 0.504931] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved [ 0.504934] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.540082] AppArmor: AppArmor Filesystem Enabled [ 0.540098] pci 0000:01:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.540102] pci 0000:02:00.0: BAR 6: no parent found for of device [0xfffe0000-0xffffffff] [ 0.540147] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff] [ 0.540150] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.540153] pci 0000:00:01.0: IO window: 0x5000-0x5fff [ 0.540157] pci 0000:00:01.0: MEM window: 0xd0000000-0xd2ffffff [ 0.540161] pci 0000:00:01.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.540166] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02 [ 0.540169] pci 0000:00:1c.0: IO window: 0x3000-0x4fff [ 0.540176] pci 0000:00:1c.0: MEM window: 0xd8200000-0xd92fffff [ 0.540181] pci 0000:00:1c.0: PREFETCH window: 0x000000d3000000-0x000000d40fffff [ 0.540189] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03 [ 0.540193] pci 0000:00:1c.1: IO window: 0x2000-0x2fff [ 0.540199] pci 0000:00:1c.1: MEM window: 0xd7100000-0xd81fffff [ 0.540203] pci 0000:00:1c.1: PREFETCH window: 0x000000d4100000-0x000000d50fffff [ 0.540212] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:05 [ 0.540215] pci 0000:00:1c.5: IO window: 0x1000-0x1fff [ 0.540221] pci 0000:00:1c.5: MEM window: 0xd6100000-0xd70fffff [ 0.540226] pci 0000:00:1c.5: PREFETCH window: 0x000000d5100000-0x000000d60fffff [ 0.540234] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.540236] pci 0000:00:1e.0: IO window: disabled [ 0.540242] pci 0000:00:1e.0: MEM window: disabled [ 0.540247] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.540256] alloc irq_desc for 16 on node -1 [ 0.540258] alloc kstat_irqs on node -1 [ 0.540262] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.540266] pci 0000:00:01.0: setting latency timer to 64 [ 0.540273] alloc irq_desc for 17 on node -1 [ 0.540275] alloc kstat_irqs on node -1 [ 0.540278] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.540283] pci 0000:00:1c.0: setting latency timer to 64 [ 0.540291] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.540296] pci 0000:00:1c.1: setting latency timer to 64 [ 0.540304] pci 0000:00:1c.5: enabling device (0000 -> 0003) [ 0.540308] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.540313] pci 0000:00:1c.5: setting latency timer to 64 [ 0.540351] pci 0000:00:1e.0: setting latency timer to 64 [ 0.540355] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.540358] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.540360] pci_bus 0000:01: resource 0 io: [0x5000-0x5fff] [ 0.540363] pci_bus 0000:01: resource 1 mem: [0xd0000000-0xd2ffffff] [ 0.540365] pci_bus 0000:01: resource 2 pref mem [0xc0000000-0xcfffffff] [ 0.540368] pci_bus 0000:02: resource 0 io: [0x3000-0x4fff] [ 0.540371] pci_bus 0000:02: resource 1 mem: [0xd8200000-0xd92fffff] [ 0.540373] pci_bus 0000:02: resource 2 pref mem [0xd3000000-0xd40fffff] [ 0.540376] pci_bus 0000:03: resource 0 io: [0x2000-0x2fff] [ 0.540379] pci_bus 0000:03: resource 1 mem: [0xd7100000-0xd81fffff] [ 0.540381] pci_bus 0000:03: resource 2 pref mem [0xd4100000-0xd50fffff] [ 0.540384] pci_bus 0000:05: resource 0 io: [0x1000-0x1fff] [ 0.540386] pci_bus 0000:05: resource 1 mem: [0xd6100000-0xd70fffff] [ 0.540389] pci_bus 0000:05: resource 2 pref mem [0xd5100000-0xd60fffff] [ 0.540391] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.540394] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffff] [ 0.540423] NET: Registered protocol family 2 [ 0.540510] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.540789] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.541147] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.541336] TCP: Hash tables configured (established 131072 bind 65536) [ 0.541338] TCP reno registered [ 0.541404] NET: Registered protocol family 1 [ 0.541455] Trying to unpack rootfs image as initramfs... [ 0.731706] Freeing initrd memory: 7468k freed [ 0.734779] Simple Boot Flag value 0x5 read from CMOS RAM was invalid [ 0.734782] Simple Boot Flag at 0x44 set to 0x1 [ 0.734960] cpufreq-nforce2: No nForce2 chipset. [ 0.734989] Scanning for low memory corruption every 60 seconds [ 0.735093] audit: initializing netlink socket (disabled) [ 0.735110] type=2000 audit(1259622311.732:1): initialized [ 0.743716] highmem bounce pool size: 64 pages [ 0.743721] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.745160] VFS: Disk quotas dquot_6.5.2 [ 0.745219] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.745755] fuse init (API version 7.12) [ 0.745837] msgmni has been set to 1680 [ 0.746032] alg: No test for stdrng (krng) [ 0.746046] io scheduler noop registered [ 0.746048] io scheduler anticipatory registered [ 0.746049] io scheduler deadline registered [ 0.746091] io scheduler cfq registered (default) [ 0.776044] pci 0000:01:00.0: Boot video device [ 0.776154] alloc irq_desc for 24 on node -1 [ 0.776156] alloc kstat_irqs on node -1 [ 0.776165] pcieport-driver 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.776171] pcieport-driver 0000:00:01.0: setting latency timer to 64 [ 0.776300] alloc irq_desc for 25 on node -1 [ 0.776302] alloc kstat_irqs on node -1 [ 0.776311] pcieport-driver 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.776322] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.776473] alloc irq_desc for 26 on node -1 [ 0.776475] alloc kstat_irqs on node -1 [ 0.776484] pcieport-driver 0000:00:1c.1: irq 26 for MSI/MSI-X [ 0.776495] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.776646] alloc irq_desc for 27 on node -1 [ 0.776648] alloc kstat_irqs on node -1 [ 0.776657] pcieport-driver 0000:00:1c.5: irq 27 for MSI/MSI-X [ 0.776668] pcieport-driver 0000:00:1c.5: setting latency timer to 64 [ 0.776769] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.776964] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.778853] ACPI: AC Adapter [AC] (off-line) [ 0.778921] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.778925] ACPI: Power Button [PWRF] [ 0.778976] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1 [ 0.778983] ACPI: Sleep Button [SLPB] [ 0.779022] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2 [ 0.779029] ACPI: Power Button [PWRB] [ 0.779069] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3 [ 0.780472] ACPI: Lid Switch [LID0] [ 0.780678] fan PNP0C0B:00: registered as cooling_device0 [ 0.780683] ACPI: Fan [FAN] (on) [ 0.781027] ACPI: Invalid PBLK length [8] [ 0.781518] ACPI: SSDT bde76c98 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) [ 0.782115] ACPI: SSDT bde74618 005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) [ 0.782569] Monitor-Mwait will be used to enter C-1 state [ 0.782592] Monitor-Mwait will be used to enter C-2 state [ 0.782614] Monitor-Mwait will be used to enter C-3 state [ 0.782622] Marking TSC unstable due to TSC halts in idle [ 0.782641] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 0.782659] processor LNXCPU:00: registered as cooling_device1 [ 0.782678] ACPI: Invalid PBLK length [8] [ 0.783141] ACPI: SSDT bde75e18 001CF (v01 PmRef ApIst 00003000 INTL 20051117) [ 0.783605] ACPI: SSDT bde76f18 0008D (v01 PmRef ApCst 00003000 INTL 20051117) [ 0.784202] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 0.784220] processor LNXCPU:01: registered as cooling_device2 [ 0.793756] thermal LNXTHERM:01: registered as thermal_zone0 [ 0.793764] ACPI: Thermal Zone [TZ0] (56 C) [ 0.798498] thermal LNXTHERM:02: registered as thermal_zone1 [ 0.798506] ACPI: Thermal Zone [TZ1] (56 C) [ 0.798566] isapnp: Scanning for PnP cards... [ 0.923888] ACPI: Battery Slot [BAT0] (battery present) [ 1.154449] isapnp: No Plug & Play device found [ 1.155591] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.156871] brd: module loaded [ 1.157310] loop: module loaded [ 1.157377] input: Macintosh mouse button emulation as /devices/virtual/input/input4 [ 1.157444] ahci 0000:00:1f.2: version 3.0 [ 1.157455] alloc irq_desc for 19 on node -1 [ 1.157457] alloc kstat_irqs on node -1 [ 1.157462] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.157492] alloc irq_desc for 28 on node -1 [ 1.157494] alloc kstat_irqs on node -1 [ 1.157503] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.157552] ahci: SSS flag set, parallel bus scan disabled [ 1.157591] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.157594] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems [ 1.157600] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.180064] scsi0 : ahci [ 1.180141] scsi1 : ahci [ 1.180198] scsi2 : ahci [ 1.180251] scsi3 : ahci [ 1.180304] scsi4 : ahci [ 1.180360] scsi5 : ahci [ 1.180501] ata1: SATA max UDMA/133 abar m2...@0xd9304000 port 0xd9304100 irq 28 [ 1.180513] ata2: SATA max UDMA/133 abar m2...@0xd9304000 port 0xd9304180 irq 28 [ 1.180516] ata3: DUMMY [ 1.180517] ata4: DUMMY [ 1.180520] ata5: SATA max UDMA/133 abar m2...@0xd9304000 port 0xd9304300 irq 28 [ 1.180524] ata6: SATA max UDMA/133 abar m2...@0xd9304000 port 0xd9304380 irq 28 [ 1.181389] Fixed MDIO Bus: probed [ 1.181422] PPP generic driver version 2.4.2 [ 1.181505] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.181522] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.181532] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.181536] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.181579] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.185477] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.185484] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 1.185497] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xd9304c00 [ 1.200016] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.200089] usb usb1: configuration #1 chosen from 1 choice [ 1.200117] hub 1-0:1.0: USB hub found [ 1.200124] hub 1-0:1.0: 4 ports detected [ 1.200178] alloc irq_desc for 20 on node -1 [ 1.200180] alloc kstat_irqs on node -1 [ 1.200185] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.200194] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.200198] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.200226] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.204124] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.204130] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.204143] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd9304800 [ 1.216017] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.216074] usb usb2: configuration #1 chosen from 1 choice [ 1.216101] hub 2-0:1.0: USB hub found [ 1.216107] hub 2-0:1.0: 8 ports detected [ 1.216170] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.216185] uhci_hcd: USB Universal Host Controller Interface driver [ 1.216203] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.216210] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.216213] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.216241] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.216274] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000060e0 [ 1.216355] usb usb3: configuration #1 chosen from 1 choice [ 1.216380] hub 3-0:1.0: USB hub found [ 1.216386] hub 3-0:1.0: 2 ports detected [ 1.216430] alloc irq_desc for 22 on node -1 [ 1.216435] alloc kstat_irqs on node -1 [ 1.216439] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22 [ 1.216446] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.216449] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.216482] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.216525] uhci_hcd 0000:00:1a.1: irq 22, io base 0x000060c0 [ 1.216599] usb usb4: configuration #1 chosen from 1 choice [ 1.216623] hub 4-0:1.0: USB hub found [ 1.216629] hub 4-0:1.0: 2 ports detected [ 1.216676] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.216683] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.216686] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.216713] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.216738] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000060a0 [ 1.216811] usb usb5: configuration #1 chosen from 1 choice [ 1.216836] hub 5-0:1.0: USB hub found [ 1.216842] hub 5-0:1.0: 2 ports detected [ 1.216888] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.216894] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.216898] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.216927] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.216953] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00006080 [ 1.217026] usb usb6: configuration #1 chosen from 1 choice [ 1.217051] hub 6-0:1.0: USB hub found [ 1.217057] hub 6-0:1.0: 2 ports detected [ 1.217102] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 1.217109] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.217112] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.217144] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.217169] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00006060 [ 1.217241] usb usb7: configuration #1 chosen from 1 choice [ 1.217266] hub 7-0:1.0: USB hub found [ 1.217271] hub 7-0:1.0: 2 ports detected [ 1.217323] alloc irq_desc for 18 on node -1 [ 1.217325] alloc kstat_irqs on node -1 [ 1.217329] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.217335] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 1.217339] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 1.217376] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8 [ 1.217408] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00006040 [ 1.217479] usb usb8: configuration #1 chosen from 1 choice [ 1.217503] hub 8-0:1.0: USB hub found [ 1.217511] hub 8-0:1.0: 2 ports detected [ 1.217604] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12 [ 1.221380] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.224226] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.224231] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.224234] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.224237] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.224240] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.224290] mice: PS/2 mouse device common for all mice [ 1.224423] rtc_cmos 00:03: RTC can wake from S4 [ 1.224452] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 1.224481] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs [ 1.224585] device-mapper: uevent: version 1.0.3 [ 1.224665] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 1.224749] device-mapper: multipath: version 1.1.0 loaded [ 1.224751] device-mapper: multipath round-robin: version 1.0.0 loaded [ 1.224862] EISA: Probing bus 0 at eisa.0 [ 1.224868] Cannot allocate resource for EISA slot 1 [ 1.224870] Cannot allocate resource for EISA slot 2 [ 1.224872] Cannot allocate resource for EISA slot 3 [ 1.224873] Cannot allocate resource for EISA slot 4 [ 1.224875] Cannot allocate resource for EISA slot 5 [ 1.224877] Cannot allocate resource for EISA slot 6 [ 1.224887] EISA: Detected 0 cards. [ 1.225044] cpuidle: using governor ladder [ 1.225162] cpuidle: using governor menu [ 1.225627] TCP cubic registered [ 1.225775] NET: Registered protocol family 10 [ 1.226209] lo: Disabled Privacy Extensions [ 1.226530] NET: Registered protocol family 17 [ 1.226545] Bluetooth: L2CAP ver 2.13 [ 1.226547] Bluetooth: L2CAP socket layer initialized [ 1.226550] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.226552] Bluetooth: SCO socket layer initialized [ 1.226581] Bluetooth: RFCOMM TTY layer initialized [ 1.226584] Bluetooth: RFCOMM socket layer initialized [ 1.226586] Bluetooth: RFCOMM ver 1.11 [ 1.227012] Using IPI No-Shortcut mode [ 1.227069] PM: Resume from disk failed. [ 1.227080] registered taskstats version 1 [ 1.227187] Magic number: 1:241:101 [ 1.227258] rtc_cmos 00:03: setting system clock to 2009-11-30 23:05:12 UTC (1259622312) [ 1.227261] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 1.227263] EDD information not available. [ 1.260429] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5 [ 1.500051] Clocksource tsc unstable (delta = -257674303 ns) [ 1.664101] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.664818] ata1.00: ATA-8: Hitachi HTS543232L9A300, FB4OC40F, max UDMA/100 [ 1.664822] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.665868] ata1.00: configured for UDMA/100 [ 1.680403] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4O PQ: 0 ANSI: 5 [ 1.680519] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.680560] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.680604] sd 0:0:0:0: [sda] Write Protect is off [ 1.680607] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.680629] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.680743] sda: sda1 sda2 sda3 sda4 < sda5 [ 1.736063] usb 2-4: new high speed USB device using ehci_hcd and address 2 [ 1.736231] sda6 > [ 1.736584] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.905501] usb 2-4: configuration #1 chosen from 1 choice [ 2.144057] usb 3-1: new full speed USB device using uhci_hcd and address 2 [ 2.302386] usb 3-1: configuration #1 chosen from 1 choice [ 2.544093] usb 3-2: new full speed USB device using uhci_hcd and address 3 [ 2.568101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.573513] ata2.00: ATAPI: Optiarc DVD RW AD-7910S, 1.81, max UDMA/100 [ 2.579937] ata2.00: configured for UDMA/100 [ 2.605525] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7910S 1.81 PQ: 0 ANSI: 5 [ 2.641008] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.641011] Uniform CD-ROM driver Revision: 3.20 [ 2.641098] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.641141] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.721388] usb 3-2: configuration #1 chosen from 1 choice [ 2.960103] ata5: SATA link down (SStatus 0 SControl 300) [ 3.296103] ata6: SATA link down (SStatus 0 SControl 300) [ 3.312176] Freeing unused kernel memory: 540k freed [ 3.312486] Write protecting the kernel text: 4568k [ 3.312561] Write protecting the kernel read-only data: 1836k [ 3.432049] acpi device:03: registered as cooling_device3 [ 3.432185] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/device:02/input/input6 [ 3.432223] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 3.439716] Linux agpgart interface v0.103 [ 3.497391] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.497412] r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.497457] r8169 0000:02:00.0: setting latency timer to 64 [ 3.497513] alloc irq_desc for 29 on node -1 [ 3.497515] alloc kstat_irqs on node -1 [ 3.497532] r8169 0000:02:00.0: irq 29 for MSI/MSI-X [ 3.498153] eth0: RTL8168c/8111c at 0xf80fc000, 00:24:81:5a:e0:8e, XID 3c4000c0 IRQ 29 [ 5.556056] PM: Starting manual resume from disk [ 5.556060] PM: Resume from partition 8:5 [ 5.556062] PM: Checking hibernation image. [ 5.556242] PM: Resume from disk failed. [ 5.566432] EXT4-fs (sda6): barriers enabled [ 5.580934] kjournald2 starting: pid 409, dev sda6:8, commit interval 5 seconds [ 5.580961] EXT4-fs (sda6): delayed allocation enabled [ 5.580966] EXT4-fs: file extents enabled [ 5.581066] EXT4-fs: mballoc enabled [ 5.581085] EXT4-fs (sda6): mounted filesystem with ordered data mode [ 6.390904] type=1505 audit(1259622317.660:2): operation="profile_load" pid=432 name=/usr/share/gdm/guest-session/Xsession [ 6.433179] type=1505 audit(1259622317.704:3): operation="profile_load" pid=433 name=/sbin/dhclient3 [ 6.433915] type=1505 audit(1259622317.704:4): operation="profile_load" pid=433 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 6.434306] type=1505 audit(1259622317.704:5): operation="profile_load" pid=433 name=/usr/lib/connman/scripts/dhclient-script [ 6.492747] type=1505 audit(1259622317.765:6): operation="profile_load" pid=434 name=/usr/bin/evince [ 6.504325] type=1505 audit(1259622317.773:7): operation="profile_load" pid=434 name=/usr/bin/evince-previewer [ 6.511175] type=1505 audit(1259622317.781:8): operation="profile_load" pid=434 name=/usr/bin/evince-thumbnailer [ 6.567017] type=1505 audit(1259622317.836:9): operation="profile_load" pid=436 name=/usr/lib/cups/backend/cups-pdf [ 6.567862] type=1505 audit(1259622317.836:10): operation="profile_load" pid=436 name=/usr/sbin/cupsd [ 6.605769] type=1505 audit(1259622317.876:11): operation="profile_load" pid=437 name=/usr/sbin/dhcpd3 [ 7.906842] Adding 4192924k swap on /dev/sda5. Priority:-1 extents:1 across:4192924k [ 8.371862] EXT4-fs (sda6): warning: maximal mount count reached, running e2fsck is recommended [ 8.384298] EXT4-fs (sda6): internal journal on sda6:8 [ 10.395235] udev: starting version 147 [ 11.228977] lp: driver loaded but no devices found [ 12.040934] Bluetooth: Generic Bluetooth USB driver ver 0.5 [ 12.041043] usbcore: registered new interface driver btusb [ 12.456641] cfg80211: Calling CRDA to update world regulatory domain [ 12.493253] __ratelimit: 6 callbacks suppressed [ 12.493256] type=1505 audit(1259633123.765:14): operation="profile_replace" pid=774 name=/usr/share/gdm/guest-session/Xsession [ 12.494925] type=1505 audit(1259633123.765:15): operation="profile_replace" pid=775 name=/sbin/dhclient3 [ 12.495648] type=1505 audit(1259633123.765:16): operation="profile_replace" pid=775 name=/usr/lib/NetworkManager/nm-dhcp-client.action [ 12.496042] type=1505 audit(1259633123.765:17): operation="profile_replace" pid=775 name=/usr/lib/connman/scripts/dhclient-script [ 12.499591] type=1505 audit(1259633123.769:18): operation="profile_replace" pid=776 name=/usr/bin/evince [ 12.511234] type=1505 audit(1259633123.781:19): operation="profile_replace" pid=776 name=/usr/bin/evince-previewer [ 12.518206] type=1505 audit(1259633123.789:20): operation="profile_replace" pid=776 name=/usr/bin/evince-thumbnailer [ 12.527653] type=1505 audit(1259633123.797:21): operation="profile_replace" pid=779 name=/usr/lib/cups/backend/cups-pdf [ 12.528516] type=1505 audit(1259633123.801:22): operation="profile_replace" pid=779 name=/usr/sbin/cupsd [ 12.530897] type=1505 audit(1259633123.801:23): operation="profile_replace" pid=780 name=/usr/sbin/dhcpd3 [ 14.343600] nvidia: module license 'NVIDIA' taints kernel. [ 14.343604] Disabling lock debugging due to kernel taint [ 14.397268] Linux video capture interface: v2.00 [ 14.398305] lis3lv02d: laptop model unknown, using default axes configuration [ 14.398992] lis3lv02d: 1-byte sensor found [ 14.411003] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input7 [ 14.411077] Registered led device: hp::hddprotect [ 14.411088] lis3lv02d driver loaded. [ 14.567420] cfg80211: World regulatory domain updated: [ 14.567423] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 14.567426] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.567429] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.567431] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 14.567434] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.567436] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 14.597044] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 14.597059] nvidia 0000:01:00.0: setting latency timer to 64 [ 14.597182] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 14.907511] uvcvideo: Found UVC 1.00 device HP Webcam (10f1:1a09) [ 14.923821] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input8 [ 14.923867] usbcore: registered new interface driver uvcvideo [ 14.923870] USB Video Class driver (v0.1.0) [ 15.320247] input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input9 [ 15.432966] ip_tables: (C) 2000-2006 Netfilter Core Team [ 16.697034] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27k [ 16.697038] iwlagn: Copyright(c) 2003-2009 Intel Corporation [ 16.697119] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 16.697149] iwlagn 0000:03:00.0: setting latency timer to 64 [ 16.697198] iwlagn 0000:03:00.0: Detected Intel Wireless WiFi Link 5100AGN REV=0x54 [ 16.736929] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 16.736991] alloc irq_desc for 30 on node -1 [ 16.736993] alloc kstat_irqs on node -1 [ 16.737013] iwlagn 0000:03:00.0: irq 30 for MSI/MSI-X [ 17.075796] phy0: Selected rate control algorithm 'iwl-agn-rs' [ 18.000860] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 18.000909] alloc irq_desc for 31 on node -1 [ 18.000911] alloc kstat_irqs on node -1 [ 18.000925] HDA Intel 0000:00:1b.0: irq 31 for MSI/MSI-X [ 18.000958] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.070770] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 18.070773] Bluetooth: BNEP filters: protocol multicast [ 18.169307] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10 [ 18.181810] input: HDA Intel Mic at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 18.181874] input: HDA Intel Line Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 18.181931] input: HDA Intel HP Out at Ext Front Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 18.240888] Bridge firewalling registered [ 23.487063] r8169: eth0: link down [ 23.487257] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 23.721883] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-2.ucode [ 24.000871] iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12 [ 24.148893] Registered led device: iwl-phy0::radio [ 24.148939] Registered led device: iwl-phy0::assoc [ 24.148986] Registered led device: iwl-phy0::RX [ 24.149026] Registered led device: iwl-phy0::TX [ 24.173599] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 26.045347] __ratelimit: 6 callbacks suppressed [ 26.045355] type=1503 audit(1259633137.317:26): operation="open" pid=1219 parent=1218 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 27.749027] CPU0 attaching NULL sched-domain. [ 27.749039] CPU1 attaching NULL sched-domain. [ 27.768164] CPU0 attaching sched-domain: [ 27.768172] domain 0: span 0-1 level MC [ 27.768179] groups: 0 1 [ 27.768189] domain 1: span 0-1 level CPU [ 27.768195] groups: 0-1 (__cpu_power = 2048) [ 27.768208] CPU1 attaching sched-domain: [ 27.768213] domain 0: span 0-1 level MC [ 27.768219] groups: 1 0 [ 27.768228] domain 1: span 0-1 level CPU [ 27.768234] groups: 0-1 (__cpu_power = 2048) [ 27.990314] type=1503 audit(1259633139.260:27): operation="open" pid=1409 parent=1408 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 28.480248] type=1503 audit(1259633139.749:28): operation="open" pid=1524 parent=1416 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 29.111534] type=1503 audit(1259633140.381:29): operation="open" pid=1531 parent=1530 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 30.137830] type=1503 audit(1259633141.408:30): operation="open" pid=1545 parent=1544 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 31.518045] type=1503 audit(1259633142.788:31): operation="open" pid=1561 parent=1560 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 31.607150] type=1503 audit(1259633142.877:32): operation="open" pid=1572 parent=1571 profile="/usr/sbin/mysqld" requested_mask="r::" denied_mask="r::" fsuid=0 ouid=0 name="/sys/devices/system/cpu/" [ 36.606994] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 36.607002] vboxdrv: Warning: 2.6.31+ kernel detected. Most likely the hwardware performance [ 36.607005] vboxdrv: counter framework which can generate NMIs is active. You have to prevent [ 36.607008] vboxdrv: the usage of hardware performance counters by [ 36.607011] vboxdrv: echo 2 > /proc/sys/kernel/perf_counter_paranoid [ 36.607019] vboxdrv: Found 2 processor cores. [ 36.607185] vboxdrv: fAsync=0 offMin=0x474 offMax=0xa014 [ 36.607270] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 36.607275] vboxdrv: Successfully loaded version 3.0.8 (interface 0x000e0000). [ 40.458462] ppdev: user-space parallel port driver [ 49.572601] CPU0 attaching NULL sched-domain. [ 49.572607] CPU1 attaching NULL sched-domain. [ 49.592090] CPU0 attaching sched-domain: [ 49.592094] domain 0: span 0-1 level MC [ 49.592098] groups: 0 1 [ 49.592103] domain 1: span 0-1 level CPU [ 49.592106] groups: 0-1 (__cpu_power = 2048) [ 49.592113] CPU1 attaching sched-domain: [ 49.592116] domain 0: span 0-1 level MC [ 49.592119] groups: 1 0 [ 49.592123] domain 1: span 0-1 level CPU [ 49.592126] groups: 0-1 (__cpu_power = 2048) [ 89.116040] wlan0: authenticate with AP 00:21:29:7a:28:4a [ 89.117990] wlan0: authenticated [ 89.117994] wlan0: associate with AP 00:21:29:7a:28:4a [ 89.120318] wlan0: RX AssocResp from 00:21:29:7a:28:4a (capab=0x411 status=0 aid=2) [ 89.120321] wlan0: associated [ 89.121750] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 89.315908] padlock: VIA PadLock not detected. [ 99.144039] wlan0: no IPv6 routers present -- [Karmic] Touchpad not recognised correctly, synaptics driver not in use https://bugs.launchpad.net/bugs/380126 You received this bug notification because you are a member of Ubuntu-X, which is subscribed to xserver-xorg-input-synaptics in ubuntu. _______________________________________________ Mailing list: https://launchpad.net/~ubuntu-x-swat Post to : ubuntu-x-swat@lists.launchpad.net Unsubscribe : https://launchpad.net/~ubuntu-x-swat More help : https://help.launchpad.net/ListHelp
