这个环境比 schroot 干净, 所以不必再加一层 pbuilder 了。 2010/10/2 Zhengpeng Hou <zhengpeng-...@ubuntu.com>: > 我从来都是用schroot + pbuilder + Xephyr > 的,一般我机器上总会有好几个chroot和pbuilder,程序的测试直接用Xephyr跑. > > 2010/10/2 LI Daobing <lidaob...@gmail.com> > >> From: http://www.cnblogs.com/lidaobing/archive/2010/10/02/1841349.html >> 0. 原因 >> 尽管你是在 Ubuntu 下工作,但由于种种原因,你还是需要给 Debian >> 做打包工作,如果你不想你做的包因为一些简单的错误被退回,比如无法在 Debian 下编译,没有处理好 lintian 警告,那么最好在 >> Ubuntu 下给 Debian 打包的环境,步骤如下所示: >> >> 1. 安装 approx >> 打包时经常需要反复下载一些包, 如果你的网速不够快,建议安装 approx 透明代理, 可以缓存大部分包。安装方法: "sudo >> apt-get install approx", 然后修改配置文件 /etc/approx/approx.conf 为 >> ubuntu http://cn.archive.ubuntu.com/ubuntu >> debian http://mirrors.163.com/debian >> >> 2. 修改 /etc/apt/sources.list, 修改为如下的内容 >> deb http://127.0.0.1:9999/ubuntu lucid main restricted universe multiverse >> deb http://127.0.0.1:9999/ubuntu lucid-security main restricted >> universe multiverse >> deb http://127.0.0.1:9999/ubuntu lucid-updates main restricted >> universe multiverse >> >> 3. 安装工具包, 运行 "sudo apt-get install ubuntu-dev-tools cowbuilder" >> >> 4. 准备 cowbuilder-sid >> $ sudo cp /usr/bin/pbuilder-dist /usr/bin/cowbuilder-sid >> $ sudo sed -ie 's, >> ftp://ftp.debian.org/debian,http://127.0.0.1:9999/debian,' >> /usr/bin/cowbuilder-sid >> >> 5. 准备开发环境 >> $ sudo mkdir /var/cache/pbuilder-dist/sid_result >> $ cowbuilder-sid create >> >> 6. 开始开发 >> $ dget http://ftp.debian.org/debian/pool/main/h/hello/hello_2.6-1.dsc >> $ dpkg-source -x hello_2.6-1.dsc >> $ cd hello-2.6 >> $ # 修改 debian 包,版本改为 2.6-2 >> $ debuild -S -sa >> $ cd .. >> $ cowbuilder-sid hello_2.6-2.dsc # 使用 sid 环境进行编译 >> >> 7. 检查 >> 7.1 安装最新版的 lintian >> Ubuntu 自带的 lintian 版本不够新,需要从 Debian 安装最新版本 >> $ # 到 http://ftp.us.debian.org/debian/pool/main/l/lintian/ 下载最新版本的 lintian >> $ wget >> http://ftp.us.debian.org/debian/pool/main/l/lintian/lintian_2.4.3_all.deb >> $ sudo dpkg -i lintian_2.4.3_all.deb >> $ sudo apt-get -f install >> >> 7.2 对包做最后的检查 >> $ cd /var/cache/pbuilder-dist/sid_result >> $ lintian -i hello_2.6-2_amd64.changes >> $ #如果上一步出现错误,则继续修正 >> $ debsign hello_2.6-2_amd64.changes #签名 >> >> 8. 上传 >> 根据 http://mentors.debian.net/cgi-bin/maintainer-intro 的介绍准备好 >> mentors.debian.net 的上传的环境, 然后用如下的命令上传 >> $ dput mentors hello_2.6-2_amd64.changes >> >> 9. 召唤 Debian Developer (DD) >> 到 mentors.debian.net, 登录后可以找到一份模板邮件, 把模板邮件中的内容填好,然后发到 >> debian-ment...@lists.debian.org >> 如果你有相熟的 DD, 也可以直接发信给他让他帮忙检查。 >> >> -- >> Best Regards >> LI Daobing >> -- >> ubuntu-zh mailing list >> ubuntu-zh@lists.ubuntu.com >> https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh >> > -------------- 下一部分 -------------- > 一个HTML附件被移除... > URL: > https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20101002/a0339a86/attachment.htm > -- > ubuntu-zh mailing list > ubuntu-zh@lists.ubuntu.com > https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh >
-- Best Regards LI Daobing -- ubuntu-zh mailing list ubuntu-zh@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh