sorry 贴慢了,一直存着草稿。 ~$ sudo fdisk /dev/sdb
WARNING: DOS-compatible mode is deprecated. It's strongly recommended to switch off the mode (command 'c') and change display units to sectors (command 'u'). Command (m for help): p Disk /dev/sdb: 8127 MB, 8127512576 bytes 251 heads, 62 sectors/track, 1020 cylinders Units = cylinders of 15562 * 512 = 7967744 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00054ed4 Device Boot Start End Blocks Id System /dev/sdb1 * 1 14 108903 83 Linux /dev/sdb2 15 1020 7827686 5 Extended /dev/sdb5 15 900 6893935 83 Linux /dev/sdb6 901 1020 933689 c W95 FAT32 (LBA) 插入windows后就能识别出分区,在磁盘管理器里面,sdb6跑到了U盘分区的第一个位置,而不是第3个,盘符正常,显示的状态也是healthy,但双击时还是提示需要format。 U盘上还有其他数据,不方便测试是否识别第一个分区是w95的情况了。poppy的情况说明还是可以的。 2011/4/29 Poppy <popp...@gmail.com> > 算了,还是分回去吧,U盘还是当U盘用好了。 > > > On 04/29/2011 11:56 PM, tvdbukrf inuyasha wrote: > >> 我试过~无不以格式化告终~ >> >> 2011/4/29 Earthson<earthson.la...@gmail.com> >> >> 貌似用disk utility就可以分区了吧。。貌似windows只能识别第一个分区,所以,第一个分区不要用linux专有的格式 >>> >>> 2011/4/29 tvdbukrf inuyasha<4entertri...@gmail.com> >>> >>> 大部分U盘貌似不支持分区~你强行分了也会认不出,各种问题 >>>> >>>> 2011/4/29 Poppy<popp...@gmail.com> >>>> >>>> 今天在邮件列表有朋友提示说U盘分区应该先分Windows分区再分Linux分区。 >>>>> 但是我用fdisk分区后Linux分区一直无法识别。 >>>>> mount时出现提示: >>>>> Error mounting:mount:wrong fs type. bad option, bad superblock on >>>>> /dev/sdb2. >>>>> missing codepage or helper program, or other error >>>>> In some cases useful info is found in syslog - try dmesg|tail or so. >>>>> >>>>> 运行dmesg|tail: >>>>> [ 2348.719805] sd 6:0:0:0: [sdb] No Caching mode page present >>>>> [ 2348.719810] sd 6:0:0:0: [sdb] Assuming drive cache: write through >>>>> [ 2348.719815] sd 6:0:0:0: [sdb] Attached SCSI removable disk >>>>> [ 3061.738527] EXT3-fs error (device sdb2): ext3_check_descriptors: >>>>> >>>> Block >>> >>>> bitmap for group 1 not in group (block 0)! >>>>> [ 3061.989218] EXT3-fs (sdb2): error: group descriptors corrupted >>>>> >>>>> 最后描述下我的操作: >>>>> fdisk /dev/sdb >>>>> 删除所有分区,创建两个主分区 >>>>> 第一个主分区修改id为fat32类型 >>>>> 然后w写入 >>>>> 退出 >>>>> mkfs.vfat /dev/sdb1 >>>>> mkfs.ext3 /dev/sdb2 >>>>> >>>>> 谁知道什么原因啊,帮帮 >>>>> >>>>> -- >>>>> ubuntu-zh mailing list >>>>> ubuntu-zh@lists.ubuntu.com >>>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh >>>>> >>>>> -------------- 下一部分 -------------- >>>> 一个HTML附件被移除... >>>> URL:< >>>> >>>> >>> https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20110429/101e6afb/attachment.html >>> >>>> -- >>>> ubuntu-zh mailing list >>>> ubuntu-zh@lists.ubuntu.com >>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh >>>> >>>> >>> >>> -- >>> >>> 这个世界不会因为没有你而失去什么 >>> 但是,却有可能因为你的存在而发生一些改变。。 >>> -------------- 下一部分 -------------- >>> 一个HTML附件被移除... >>> URL:< >>> >>> https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20110429/76630dab/attachment.html >>> -- >>> ubuntu-zh mailing list >>> ubuntu-zh@lists.ubuntu.com >>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh >>> >>> -------------- 下一部分 -------------- >> 一个HTML附件被移除... >> URL:< >> https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20110429/f24b3622/attachment.html >> > >> > > > -- > ubuntu-zh mailing list > ubuntu-zh@lists.ubuntu.com > https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh > -- Regards, David -------------- 下一部分 -------------- 一个HTML附件被移除... URL: <https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20110503/dc271759/attachment.html> -- ubuntu-zh mailing list ubuntu-zh@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh