2012年3月28日星期三 解�Qchakra上�_�C�rudevd的�e�`��息���} Sat Mar 24 21:00:39 2012: :: Adjusting system time and setting kernel timezone [BUSY] [DONE] Sat Mar 24 21:00:39 2012: :: Starting UDev Daemon [BUSY] [DONE] Sat Mar 24 21:00:39 2012: :: Triggering UDev uevents [BUSY] [DONE] Sat Mar 24 21:00:39 2012: :: Loading User-specified Modules [BUSY] [DONE] Sat Mar 24 21:00:39 2012: :: Waiting for UDev uevents to be processed [BUSY] udevd[135]: worker [156] timeout, kill it Sat Mar 24 21:00:39 2012: Sat Mar 24 21:00:39 2012: udevd[135]: seq 1197 '/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' killed Sat Mar 24 21:00:39 2012: Sat Mar 24 21:00:39 2012: [DONE] Sat Mar 24 21:00:39 2012: :: Bringing up loopback interface [BUSY] udevd[135]: worker [156] terminated by signal 9 (Killed) Sat Mar 24 21:00:39 2012: Sat Mar 24 21:00:39 2012: [DONE]
好像是在1月份的�r候更新完kernel就出�F�@�����}, �_�C�r候��多花了30秒在waiting,因�橐恢��ξ业南到y�]造成什�N影��, 所以也�]怎�N理他,不�^拖慢�_�C速度�@�c��在有�c�廊耍� �@�滋煸诓檫@�����},�K於搞定了。 首先你的udev必��是 181-5的版本 pacman -Q udev udev 181-5 如果�]有的��,��得去升��一下 然後查看一下你的/var/log/boot 看一下出���}的是哪���b置 我的��息是�L�@���幼� udevd[135]: seq 1197 '/devices/pci0000:00/0000:00:1c.1/0000:03:00.0' killed 然後我用lspci -vv|less,找到03:00.0,看看是什�N�|西 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8191SEvB Wireless LAN Controller (rev 10) Subsystem: Realtek Semiconductor Co., Ltd. Device e020 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at 2000 [size=256] Region 1: Memory at f4300000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: rtl8192se Kernel modules: rtl8192se 原�硎俏业木W卡,看到�@行 Kernel modules: rtl8192se 得知kernel是用rtl8192se的模�M�眚��泳W卡, 於是我先��/etc/rc.conf中的MODULES中的rtl8192se�o�h除, 然後再新增/etc/modprobe.d/rtl8192se_blacklist.conf的�n案 �热菔� blacklist rtl8192se 接下�碇亻_�C後�l�F���e�`��息已��消失了, 不�^�W卡�s�]有被自�����樱� 於是我在/etc/rc.local中再新增一行 modprobe rtl8192se �碜�他�_�C�r自�����泳W卡, 如此一�砭痛蠊Ω娉闪恕� �⒖��碓矗� - FS#27938 - [udev] udev-177 breaks loading of some firmware<https://bugs.archlinux.org/task/27938> On Tue, Apr 3, 2012 at 9:37 PM, Tao KY <taoky1...@gmail.com> wrote: > 力气太小,跳不过去。 > 能复制到邮件里来吗? > > 2012/4/3 GSC <xgd...@gmail.com> > > > 参考: > > http://max-linux-space.blogspot.com/2012/03/chakraudevd.html > > > > On Tue, Apr 3, 2012 at 6:00 PM, Tao KY <taoky1...@gmail.com> wrote: > > > > > 启动日志(/var/log/boot): > > > Tue Apr 3 17:49:00 2012: :: Adjusting system time and setting kernel > > > timezone [BUSY] [DONE] > > > Tue Apr 3 17:49:00 2012: :: Starting UDev Daemon [BUSY] [DONE] > > > Tue Apr 3 17:49:00 2012: :: Triggering UDev uevents [BUSY] > [DONE] > > > Tue Apr 3 17:49:00 2012: :: Loading User-specified Modules [BUSY] > > > [DONE] > > > Tue Apr 3 17:49:00 2012: :: Waiting for UDev uevents to be processed > > > [BUSY] udevd[252]: worker [272] timeout, kill it > > > Tue Apr 3 17:49:00 2012: > > > Tue Apr 3 17:49:00 2012: udevd[252]: seq 1323 > > > '/devices/pci0000:00/0000:00:1c.1/0000:0d:00.0' killed > > > Tue Apr 3 17:49:00 2012: > > > Tue Apr 3 17:49:00 2012: udevd[252]: worker [272] terminated by > signal 9 > > > (Killed) > > > Tue Apr 3 17:49:00 2012: > > > Tue Apr 3 17:49:00 2012: [DONE] > > > Tue Apr 3 17:49:00 2012: :: Bringing up loopback interface [BUSY] > > > [DONE] > > > Tue Apr 3 17:49:00 2012: :: Checking Filesystems [BUSY] > > /sbin/fsck.xfs: > > > XFS file system. > > > Tue Apr 3 17:49:00 2012: [DONE] > > > Tue Apr 3 17:49:00 2012: :: Remounting Root [BUSY] [DONE] > > > Tue Apr 3 17:49:00 2012: :: Mounting Local Filesystems [BUSY] > > [DONE] > > > Tue Apr 3 17:49:00 2012: :: Activating Swap [BUSY] [DONE] > > > Tue Apr 3 17:49:00 2012: :: Configuring Time Zone [BUSY] [DONE] > > > Tue Apr 3 17:49:00 2012: :: Initializing Random Seed [BUSY] > [DONE] > > > Tue Apr 3 17:49:00 2012: :: Removing Leftover Files [BUSY] > [DONE] > > > Tue Apr 3 17:49:01 2012: :: Setting Hostname: TaoKY-Computer [BUSY] > > > [DONE] > > > Tue Apr 3 17:49:01 2012: :: Setting Consoles to UTF-8 mode [BUSY] > > > [DONE] > > > Tue Apr 3 17:49:01 2012: :: Loading Keyboard Map: us [BUSY] > [DONE] > > > Tue Apr 3 17:49:01 2012: :: Saving dmesg Log [BUSY] [DONE] > > > Tue Apr 3 17:49:01 2012: INIT: Entering runlevel: 5 > > > Tue Apr 3 17:49:02 2012: :: Starting Syslog-NG [BUSY] [DONE] > > > Tue Apr 3 17:49:02 2012: :: Starting D-BUS system messagebus [BUSY] > > > [DONE] > > > Tue Apr 3 17:49:03 2012: :: Starting NetworkManager [BUSY] > [DONE] > > > Tue Apr 3 17:49:03 2012: :: Mounting Network Filesystems [BUSY] > > > [DONE] > > > Tue Apr 3 17:49:03 2012: :: Starting Cron Daemon [BUSY] [DONE] > > > Tue Apr 3 17:49:03 2012: :: Starting Avahi mDNS/DNS-SD Daemon > [BUSY] > > > [DONE] > > > Tue Apr 3 17:49:04 2012: :: Starting Avahi mDNS/DNS-SD DNS Server > > > Configuration Daemon [BUSY] [DONE]0 > > > Tue Apr 3 17:49:04 2012: :: Restoring ALSA Levels [BUSY] [DONE] > > > Tue Apr 3 17:49:04 2012: :: Loading vhba and loop modules [BUSY] > > > [DONE] > > > Tue Apr 3 17:49:05 2012: :: Waiting for /dev/vhba_ctl [BUSY] > > [DONE] > > > Tue Apr 3 17:49:05 2012: :: Starting cdemud [BUSY] [DONE] > > > Tue Apr 3 17:49:05 2012: :: Starting Samba Server [BUSY] [DONE] > > > Tue Apr 3 17:49:06 2012: :: Starting cupsd daemon [BUSY] [DONE] > > > > > > /etc/rc.conf: > > > # > > > # /etc/rc.conf - Main Configuration for Chakra GNU/Linux > > > # > > > > > > # > ----------------------------------------------------------------------- > > > # LOCALIZATION > > > # > ----------------------------------------------------------------------- > > > # > > > # LOCALE: available languages can be listed with the 'locale -a' > command > > > # LANG in /etc/locale.conf takes precedence > > > # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during > daemon > > > # startup and during the boot process. If set to 'no', the C locale is > > > used. > > > # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will > > > result > > > # in the hardware clock being left untouched (useful for > > virtualization) > > > # Note: Using "localtime" is discouraged, using "" makes hwclock fall > > > back > > > # to the value in /var/lib/hwclock/adjfile > > > # TIMEZONE: timezones are found in /usr/share/zoneinfo > > > # Note: if unset, the value in /etc/localtime is used unchanged > > > # KEYMAP: keymaps are found in /usr/share/kbd/keymaps > > > # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for > > > non-US) > > > # CONSOLEMAP: found in /usr/share/kbd/consoletrans > > > # USECOLOR: use ANSI color sequences in startup messages > > > # > > > LOCALE="en_US.UTF-8" > > > DAEMON_LOCALE="no" > > > HARDWARECLOCK="localtime" > > > TIMEZONE="Asia/Shanghai" > > > KEYMAP="us" > > > CONSOLEFONT= > > > CONSOLEMAP= > > > USECOLOR="yes" > > > > > > # > ----------------------------------------------------------------------- > > > # HARDWARE > > > # > ----------------------------------------------------------------------- > > > # > > > # MODULES: Modules to load at boot-up. Blacklisting is no longer > > supported. > > > # Replace every !module by an entry as on the following line in a > file > > in > > > # /etc/modprobe.d: > > > # blacklist module > > > # See "man modprobe.conf" for details. > > > # > > > MODULES=( ac battery button fan processor thermal video cdrom agpgart > > > intel-agp intel-gtt drm drm_kms_helper radeon ttm hid i2c-algo-bit > > i2c-i801 > > > i2c-core evdev joydev psmouse serio_raw sparse-keymap media uvcvideo > > > videodev ideapad-laptop iTCO_vendor_support iTCO_wdt cordic crc8 > > snd-hwdep > > > snd-page-alloc snd-pcm snd-timer snd snd-hda-codec snd-hda-intel > > soundcore > > > scsi_mod ahci libahci atl1c mac80211 rfkill brcmutil cfg80211 mei > usbhid > > > usbcore ehci-hcd usb-common sd_mod sr_mod vboxdrv) > > > # Udev settle timeout (default to 30) > > > UDEV_TIMEOUT=5 > > > > > > # Scan for FakeRAID (dmraid) Volumes at startup > > > USEDMRAID="no" > > > > > > # Scan for BTRFS volumes at startup > > > USEBTRFS="no" > > > > > > # Scan for LVM volume groups at startup, required if you use LVM > > > USELVM="no" > > > > > > # > ----------------------------------------------------------------------- > > > # NETWORKING > > > # > ----------------------------------------------------------------------- > > > # > > > # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts > > > # > > > HOSTNAME="TaoKY-Computer" > > > > > > # Use 'ip addr' or 'ls /sys/class/net/' to see all available > interfaces. > > > # > > > # Wired network setup > > > # - interface: name of device (required) > > > # - address: IP address (leave blank for DHCP) > > > # - netmask: subnet mask (ignored for DHCP) (optional, defaults to > > > 255.255.255.0) > > > # - broadcast: broadcast address (ignored for DHCP) (optional) > > > # - gateway: default route (ignored for DHCP) > > > # > > > # Static IP example > > > # interface=eth0 > > > # address=192.168.0.2 > > > # netmask=255.255.255.0 > > > # broadcast=192.168.0.255 > > > # gateway=192.168.0.1 > > > # > > > # DHCP example > > > # interface=eth0 > > > # address= > > > # netmask= > > > # gateway= > > > > > > interface= > > > address= > > > netmask= > > > broadcast= > > > gateway= > > > > > > # Setting this to "yes" will skip network shutdown. > > > # This is required if your root device is on NFS. > > > NETWORK_PERSIST="no" > > > > > > # Enable these netcfg profiles at boot-up. These are useful if you > happen > > > to > > > # need more advanced network features than the simple network service > > > # supports, such as multiple network configurations (ie, laptop users) > > > # - set to 'menu' to present a menu during boot-up (dialog package > > > required) > > > # - prefix an entry with a ! to disable it > > > # > > > # Network profiles are found in /etc/network.d > > > # > > > # This requires the netcfg package > > > # > > > #NETWORKS=(main) > > > > > > # > ----------------------------------------------------------------------- > > > # DAEMONS > > > # > ----------------------------------------------------------------------- > > > # > > > # Daemons to start at boot-up (in this order) > > > # - prefix a daemon with a ! to disable it > > > # - prefix a daemon with a @ to start it up in the background > > > # > > > # If you are sure nothing else touches your hardware clock (such as > ntpd > > or > > > # a dual-boot), you might want to enable 'hwclock'. Note that this will > > > only > > > # make a difference if the hwclock program has been calibrated > correctly. > > > # > > > # If you use a network filesystem you should enable 'netfs'. > > > # > > > DAEMONS=(syslog-ng dbus !network networkmanager netfs crond > avahi-daemon > > > avahi-dnsconfd alsa cdemud samba cups) > > > > > > 我发现MODULES里面东西很多,会不会是它们让开机速度慢的。 > > > 求解决。 > > > -------------- 下一部分 -------------- > > > 一个HTML附件被移除... > > > URL: < > > > > > > https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20120403/d84bb528/attachment.html > > > > > > > -- > > > ubuntu-zh mailing list > > > ubuntu-zh@lists.ubuntu.com > > > https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh > > > > > -------------- 下一部分 -------------- > > 一个HTML附件被移除... > > URL: < > > > https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20120403/b4978018/attachment.html > > > > > -- > > ubuntu-zh mailing list > > ubuntu-zh@lists.ubuntu.com > > https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh > > > -------------- 下一部分 -------------- > 一个HTML附件被移除... > URL: < > https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20120403/4bd8a0ed/attachment.html > > > -- > ubuntu-zh mailing list > ubuntu-zh@lists.ubuntu.com > https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh > -------------- 下一部分 -------------- 一个HTML附件被移除... URL: <https://lists.ubuntu.com/archives/ubuntu-zh/attachments/20120403/e09423b7/attachment.html>
-- ubuntu-zh mailing list ubuntu-zh@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-zh