Public bug reported:
I have a Laptop with:
Processor: Intel Core i7-2860QM @ 2.5GHz, 8MB Cache
Mainboard: Clevo P170HM GTX560M
RAM: 16GB (4 x 4GB DDR3 PC-1333 PIN200 Kingston)
Harddisks: 256GB SSD SATA-3 (Crucial CT256M4SSD2) and 1TB Sata 5400rpm (Samsung
hn-m101mbb)
I did the following steps to get this two issues... (standard-user is not in
the audio-group, keyboard layout after installation is not as choosed in the
installer)
Start Win7 64Bit
make a quickformat of a 4GB TDK-Usb-Memorystick
open Universal-USB-Installer-1.9.0.6
Step1: choose "Ubuntu Studio 12.04" under Step1
Step2: choose the right iso-file (md5sum follows later)
Step3: select the "F:\" witch is my usb-stick
Step4: point the Slider to 1025mb (Step4 is: "Set a persistant file size for
storing changes (Optional)")
I'm pretty sure I also did without making this optional file (let Slider
at 0mb)
click on create and agree the possibility of data-loss with clicking "Yes"
Installation done, process complete... clicking on "close" and shutdown the
computer...
Turn on Computer and push F7 for selecting boot device
select "TDKMediaTrans-It Drive P-MAP"... installer starts
choose "Deutsch" as language
choose "Install Ubuntu Studio to HDD"
on the welcome screen "Deutsch" is pre-selected; click on next
it shows that there's enough HD-Space, that the Laptop is on power and that
there's a internet connection. Activate both boxes (download updates while
installing, use 3rd party software)... next...
choose "etwas anderes"('something different') (beside of 'install aside of
other os' and 'format everything')... next...
Partitioning:
- delete /dev/sda5
- choose the free space to create a new partition: logical, 17157mb, create at
the beginning, use as Ext4, mount-point: / ....OK...
note that there's already a swap-partition on /dev/sda6
- choose "/dev/sda" to install boot loader
getting confused because it's /dev/sda8 where i'm ready to install (instead of
/dev/sda5, as i wrote before). So go back a step by click on 'Back'
(almost) exaktly the same again:
choose "etwas anderes"('something different')... next...
Partitioning:
- look veerry exact, but the partiotion i'm going to use is really /dev/sda5
- I realise that there is some grafik issues... drag the window, and everything
what was behind is left gray... however...
- making a foto before chaning anything, just for the case that I dont trust my
memory again :)
- delete /dev/sda5... and uuh, its changing the descriptions of the
partitions... what was sda8 bevor is now sda7, sda6 is sda5 now and sda7 is
sda6 now... never saw this bevore, but probably normal?? however...
- making another foto...
- choose the free space to create a new partition: logical, 17157mb, create at
the beginning, use as Ext4, mount-point: / ....OK...
this new partition is now on /dev/sda8... alright then :) ..
(note that there's already a swap-partition on /dev/sda6)
- make another foto to remember...
- choose "/dev/sda" to install boot loader
- klick on 'install now'
pre-selected time-zone is "Zurich" (really propper would be "Zürich",
but who cares :) )... click 'next'...
"Tastaturbelegung"(keyboard layout)-Window:
- pre-selected is: "Deutsch" on the left and "Deutsch" on the right side... so
I choose "Deutsch (Schweiz)" on the left side and let the apearing "Deutsch
(Schweiz)" on the right side as it is...
- testing keyboard and its as it should be... 'next'...
"Wer sind sie?"('who am i')-Window:
- name: "test"
- computername: "test-P170HMx"
- username: "test"
- password: "abc!123@"
- confirm password: "abc!123@"
(then a friend came and we spend some hours together... so, there was a break
of about 5 hours... I guess it doesn't change anything, but if you wish I can
repeat the same installation (witch I did already about 5 times in the last
days to be absolutley sure that I got it right) )
- let the pre-selected 'ask for password at login' be and click on 'next'
"Wählen sie ein Bild"('choose a pictuer')-Window:
- just click on 'next'
on the next window I don't select any other user-account to import and
continue without any import-other-account action... (click 'next')
message apears that install is finished... click on 'reboot now'...
it does a normal reboot into the new installation...
now I have to enter Password. The second drop-down menu under the
password-field shows a "Deutsch - Deutschland", witch in my opinion should be
something like 'deutsch - schweiz'... I click on it to see what else i can
choose, but there's only different styles of english... so i let it on "Deutsch
- Deutschland"
enter my password in belive that I have the swiss-german layout... zonk! wrong
password!
enter it again in belive to have a normal german layout... zonk! wrong password!
enter it again in belive to have a US-layout... aalright then! now it works...
remove the TDK-Memory-stick from where I did the installation...
open the terminal and type:
- "cat /etc/group | grep test"
- "cat /etc/group | grep audio"
plug in the TDK-Memory-stick again, make new folder, new file and copy
result into this file (cause i did the log-writings on another
computer)... close all windows, unmount memory-stick and unplug it...
here are the results:
test@test-P170HMx:~$ cat /etc/group | grep test
adm:x:4:test
cdrom:x:24:test
sudo:x:27:test
dip:x:30:test
plugdev:x:46:test
lpadmin:x:109:test
test:x:1000:
sambashare:x:123:test
test@test-P170HMx:~$ cat /etc/group | grep audio
audio:x:29:pulse
test@test-P170HMx:~$
...ah, and also in the terminal the keyboard layout is on 'US' instead
of 'German(swiss)'
** Affects: ubuntustudio
Importance: Undecided
Status: New
--
You received this bug notification because you are a member of Ubuntu
Studio Testers, which is subscribed to Ubuntu Studio.
https://bugs.launchpad.net/bugs/1039211
Title:
the standard user is not in the audio group after a fresh installation
from USB-Memorystick
Status in Ubuntu Studio Project:
New
Bug description:
I have a Laptop with:
Processor: Intel Core i7-2860QM @ 2.5GHz, 8MB Cache
Mainboard: Clevo P170HM GTX560M
RAM: 16GB (4 x 4GB DDR3 PC-1333 PIN200 Kingston)
Harddisks: 256GB SSD SATA-3 (Crucial CT256M4SSD2) and 1TB Sata 5400rpm
(Samsung hn-m101mbb)
I did the following steps to get this two issues... (standard-user is not in
the audio-group, keyboard layout after installation is not as choosed in the
installer)
Start Win7 64Bit
make a quickformat of a 4GB TDK-Usb-Memorystick
open Universal-USB-Installer-1.9.0.6
Step1: choose "Ubuntu Studio 12.04" under Step1
Step2: choose the right iso-file (md5sum follows later)
Step3: select the "F:\" witch is my usb-stick
Step4: point the Slider to 1025mb (Step4 is: "Set a persistant file size for
storing changes (Optional)")
I'm pretty sure I also did without making this optional file (let
Slider at 0mb)
click on create and agree the possibility of data-loss with clicking "Yes"
Installation done, process complete... clicking on "close" and shutdown the
computer...
Turn on Computer and push F7 for selecting boot device
select "TDKMediaTrans-It Drive P-MAP"... installer starts
choose "Deutsch" as language
choose "Install Ubuntu Studio to HDD"
on the welcome screen "Deutsch" is pre-selected; click on next
it shows that there's enough HD-Space, that the Laptop is on power and that
there's a internet connection. Activate both boxes (download updates while
installing, use 3rd party software)... next...
choose "etwas anderes"('something different') (beside of 'install aside of
other os' and 'format everything')... next...
Partitioning:
- delete /dev/sda5
- choose the free space to create a new partition: logical, 17157mb, create
at the beginning, use as Ext4, mount-point: / ....OK...
note that there's already a swap-partition on /dev/sda6
- choose "/dev/sda" to install boot loader
getting confused because it's /dev/sda8 where i'm ready to install (instead
of /dev/sda5, as i wrote before). So go back a step by click on 'Back'
(almost) exaktly the same again:
choose "etwas anderes"('something different')... next...
Partitioning:
- look veerry exact, but the partiotion i'm going to use is really /dev/sda5
- I realise that there is some grafik issues... drag the window, and
everything what was behind is left gray... however...
- making a foto before chaning anything, just for the case that I dont trust
my memory again :)
- delete /dev/sda5... and uuh, its changing the descriptions of the
partitions... what was sda8 bevor is now sda7, sda6 is sda5 now and sda7 is
sda6 now... never saw this bevore, but probably normal?? however...
- making another foto...
- choose the free space to create a new partition: logical, 17157mb, create
at the beginning, use as Ext4, mount-point: / ....OK...
this new partition is now on /dev/sda8... alright then :) ..
(note that there's already a swap-partition on /dev/sda6)
- make another foto to remember...
- choose "/dev/sda" to install boot loader
- klick on 'install now'
pre-selected time-zone is "Zurich" (really propper would be "Zürich",
but who cares :) )... click 'next'...
"Tastaturbelegung"(keyboard layout)-Window:
- pre-selected is: "Deutsch" on the left and "Deutsch" on the right side...
so I choose "Deutsch (Schweiz)" on the left side and let the apearing "Deutsch
(Schweiz)" on the right side as it is...
- testing keyboard and its as it should be... 'next'...
"Wer sind sie?"('who am i')-Window:
- name: "test"
- computername: "test-P170HMx"
- username: "test"
- password: "abc!123@"
- confirm password: "abc!123@"
(then a friend came and we spend some hours together... so, there was a break
of about 5 hours... I guess it doesn't change anything, but if you wish I can
repeat the same installation (witch I did already about 5 times in the last
days to be absolutley sure that I got it right) )
- let the pre-selected 'ask for password at login' be and click on 'next'
"Wählen sie ein Bild"('choose a pictuer')-Window:
- just click on 'next'
on the next window I don't select any other user-account to import and
continue without any import-other-account action... (click 'next')
message apears that install is finished... click on 'reboot now'...
it does a normal reboot into the new installation...
now I have to enter Password. The second drop-down menu under the
password-field shows a "Deutsch - Deutschland", witch in my opinion should be
something like 'deutsch - schweiz'... I click on it to see what else i can
choose, but there's only different styles of english... so i let it on "Deutsch
- Deutschland"
enter my password in belive that I have the swiss-german layout... zonk!
wrong password!
enter it again in belive to have a normal german layout... zonk! wrong
password!
enter it again in belive to have a US-layout... aalright then! now it works...
remove the TDK-Memory-stick from where I did the installation...
open the terminal and type:
- "cat /etc/group | grep test"
- "cat /etc/group | grep audio"
plug in the TDK-Memory-stick again, make new folder, new file and copy
result into this file (cause i did the log-writings on another
computer)... close all windows, unmount memory-stick and unplug it...
here are the results:
test@test-P170HMx:~$ cat /etc/group | grep test
adm:x:4:test
cdrom:x:24:test
sudo:x:27:test
dip:x:30:test
plugdev:x:46:test
lpadmin:x:109:test
test:x:1000:
sambashare:x:123:test
test@test-P170HMx:~$ cat /etc/group | grep audio
audio:x:29:pulse
test@test-P170HMx:~$
...ah, and also in the terminal the keyboard layout is on 'US' instead
of 'German(swiss)'
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntustudio/+bug/1039211/+subscriptions
_______________________________________________
Mailing list: https://launchpad.net/~ubuntustudio-testers
Post to : [email protected]
Unsubscribe : https://launchpad.net/~ubuntustudio-testers
More help : https://help.launchpad.net/ListHelp
