Hey everyone, I've been working on getting a build environment up for our Coldfire (m68k) chips for some time now. Today I tried to compile your latest version of uClib, 0.9.30.3 .
Per the website I also installed binutils-2.19.tar.bz2 and gcc-3.4.6.tar.bz2, both compiled just fine. These were both configured and compiled using --target=m68k-uclinux ( I also tried m68k-elf) and installed in /opt/embedded gcc was compiled with --enable-langauges=c as well... For uClibc, after going through make menuconfig options I ran a 'make CROSS=m68k-uclinux-' and came up with this error: I also tried setting my toolchain in the config itself and got the same error. [...@myhost uClibc-0.9.30.3]$ make CROSS=m68k-uclinux- make: *** No rule to make target `libc/sysdeps/linux/m68k/crtreloc.c', needed by `lib/crtreloc.o'. Stop. * I did some research and this appears to be related to MMU option but I'm really not sure. * I even stripped out every option from the config and still got this error. * make is using the m68k-uclinux-gcc and the correct toolchain, I did confirm that.... * path is set correct as well.... * config is pointing to 2.4.x linux kernel src folder.... ( /home/jim/newdev/linux-2.4.x/include ) Any help appreciated. -Jim _______________________________________________ uClibc mailing list uClibc@uclibc.org http://lists.busybox.net/mailman/listinfo/uclibc
