Hi Davide,
Davide Devoti wrote:
Actually I was working with kernel version 2.6.x, kernel 2.4.x works,
kernel 2.0.x gives errors while compiling ...
Can you try 2.6.x again, setting the RAM configuration option
to a fixed size?
(The 2.6.x code uses a different RAM detection scheme, maybe it
is buggy for the Arnewsh 5206...)
Regards
Greg
On mer, 2007-05-09 at 22:08 +1000, Greg Ungerer wrote:
Hi David,
Davide Devoti wrote:
I just began doing some tests to see if uClinux could fit for my next
projects based on ColdFire or ARM. I have to say that I'm not very
skilled on Linux, I've used it in the past but in the last 7 years I
worked on different platforms.
In this moment I'm doing some tests with the ColdFire port.
The distribution I'm using is Ubunt 7.04 (kernel version
2.6.20-15-generic), so I've downloaded and installed the following files
from uClinux site:
- Full source code uClinux-dist-20070130.tar.gz
- Toolchain m68k-uclinux-tools-20061214.sh
- Arnewsh 5206 binary image image-an5206-big-20000706.bin
and I've downloaded also the Motorola Coldfire 5206 Emulator
(coldfire-0.3.1).
The Emulator seems to work fine with the binary image downloaded from
the site, but if I configure uClinux for the same board, following the
steps make xconfig - make dep - make, the Emulator doesn't work with the
resulting image. Do you have any idea why ?
What kernel version in the dist did you build with?
If you can try each of 2.0.x, 2.4.x and 2.6.x that would
be interresting to see if none/one/two work.
Regards
Greg
------------------------------------------------------------------------
Greg Ungerer -- Chief Software Dude EMAIL: [EMAIL PROTECTED]
SnapGear -- a Secure Computing Company PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
--
------------------------------------------------------------------------
Greg Ungerer -- Chief Software Dude EMAIL: [EMAIL PROTECTED]
SnapGear -- a Secure Computing Company PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev