Francisco Perea,您好！
Thanks for your sharing experience.
Well, I did do "make menuconig"(I do not have X enviroment), "make
user_only" "make lib_only" "make romfs" before.
I changed toolchain halfway, since it reported that my arm-elf
toolchain was too old for "make". maybe it is the reason.
Anyway, I'll check it again. Thanks
======= 2007-06-05 07:40:17 您在来信中写道：=======
>Hi,
>
>I'm using uClinux for Coldfire. When I started I use to have those problems.
>I think problem seems to be the way you compile kernel. You HAVE to do
>"make xconfig", "make dep", for kernel < 2.4 and "make". This process
>will create symbolic links for your architecture, asm files and
>others. There's could be your missing files
>
>Regards
>--
>Francisco Perea
>Ing. Electricista
>
>Am Montag, den 04.06.2007, 09:06 +0800 schrieb Neil 林搏宇:
>> uClinux-dev，hi ^_^
>>
>> Some problems in compiling.
>> I use uClinux-dist-20070130.tar.gz to make a 2.6.19 kernel for arm7
>> S3C44B0X(no mmu).
>> The first three steps, "make lib_only", "make user_only", "make romfs",
>> all of them are OK.
>> But in "make" step, some problems I cannot overcome:
>> Different cross-compile toolchains I adpoted, differet errors happened.
>>
>> 1. When I used arm-linux-gcc (GCC) 3.4.4 to compile, some information came
>> from compilation:
>> neildebian:/home/neil/uClinux-dist# make
>> make -C tools/ucfront
>> make[1]: Entering directory `/home/neil/uClinux-dist/tools/ucfront'
>> make[1]: Nothing to be done for `all'.
>> make[1]: Leaving directory `/home/neil/uClinux-dist/tools/ucfront'
>> ln -sf /home/neil/uClinux-dist/tools/ucfront/ucfront tools/ucfront-gcc
>> ln -sf /home/neil/uClinux-dist/tools/ucfront/ucfront tools/ucfront-g++
>> ln -sf /home/neil/uClinux-dist/tools/ucfront/ucfront-ld tools/ucfront-ld
>> make ARCH=arm CROSS_COMPILE=arm-linux- -j1 -C linux-2.6.x || exit 1
>> make[1]: Entering directory `/home/neil/uClinux-dist/linux-2.6.x'
>> CHK include/linux/version.h
>> make[2]: `include/asm-arm/mach-types.h' is up to date.
>> CHK include/linux/utsrelease.h
>> CC arch/arm/kernel/asm-offsets.s
>> In file included from include/linux/spinlock.h:53,
>> from include/linux/capability.h:45,
>> from include/linux/sched.h:46,
>> from arch/arm/kernel/asm-offsets.c:13:
>> include/linux/kernel.h:10:20: stdarg.h: No such file or directory
>There's something wrong with your toolchain installation, stdarg.h is
>installed with the toolchain.
>
>Regards,
>Erwin
>_______________________________________________
>uClinux-dev mailing list
>uClinux-dev@uclinux.org
>http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
>This message was resent by uclinux-dev@uclinux.org
>To unsubscribe see:
>http://mailman.uclinux.org/mailman/options/uclinux-dev
= = = = = = = = = = = = = = = = = = = =
Neil 林搏宇
[EMAIL PROTECTED]
2007-06-05
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
