Hi Bob,
rwarner wrote:
Any idea or clue on how i've miss configured the system? Being new to
uclinux i'm finding many configurable items and i'm sure i do not have
them all correct yet.
See below...
Initialization from __log_buf as follows:
Linux version 2.6.19-uc1 ([EMAIL PROTECTED]) (gcc version 4.2.1) #124 Mon Apr
28 09:54:47 MST 2008
" CPU: Atmel-AT91M40xxx [14000040] revision 0 (ARMvundefined/unknown""…"
Machine: ATMEL EB01
On node 0 totalpages: 2048
DMA zone: 16 pages used for memmap
" DMA zone: 0 pag""..."
" DMA zone: 2032 pages, LIFO batch:0"
Normal zone: 0 pages used for memmap
Built 1 zonelists. Total pages: 2032
" Kernel command line: loglevel=0 log_buf_len=65536 nocache console=0
debug earlyprintk=serial time hashdist=off ihash_entries=0
rhash_entries=0 thash_entries=0 dhash_entries=0 initcall_debug ""..."
" PID hash table entries: 32 (order: 5, 128 bytes)"
" Dentry cache hash table entries: 1024 (order: 0, 4096 bytes)"
" Inode-cache has""..."
Memory: 8MB = 8MB total
" Memory: 7868KB available (642K code, 246K data, 4K init)"
" Calibrating""..."
Mount-cache hash table entries: 512
Calling initcall 0x1000e350: ptrace_break_init+0x0/0x2c()
" Cal""..."
Calling initcall 0x10010db4: ksysfs_init+0x0/0x38()
Calling initcall 0x10012d3c: filelock_init+0x0/0x54()
Calling initcall 0x10013724: init_script_binfmt+0x0/0x1c()
Calling initcall 0x10013740: init_flat_binfmt+0x0/0x1c()
" Calling initcall 0x10014""..."
Calling initcall 0x100141dc: tty_class_init+0x0/0x3c()
Calling initcall 0x1000e548: customize_machine+0x0/0x2c()
Calling initcall 0x1000e6d8: topology_init+0x0/0x24()
Calling initcall 0x10010860: param_sysfs_init+0x0/0x190()
" Calling initcall 0x10013548: init_bio+0x""..."
Calling initcall 0x10013eec: genhd_device_init+0x0/0x60()
Calling initcall 0x10014724: misc_init+0x0/0x98()
" Calling initcall 0x""..."
Calling initcall 0x10014fc0: input_init+0x0/0x120()
Calling initcall 0x10012c9c: init_pipe_fs+0x0/0x54()
" ""..."
Calling initcall 0x1000eca8: timer_init_sysfs+0x0/0x40()
" Calling initcall 0x1000f32c: irq_init_sysfs+0x0/""..."
Calling initcall 0x1000fd28: create_proc_profile+0x0/0x70()
Calling initcall 0x1000ff58: ioresources_init+0x0/0x5c()
" Calling initc""..."
Calling initcall 0x10010380: uid_cache_init+0x0/0xac()
" Calling initcall 0x100109f0: init_posix_timers+0x0/0""..."
Calling initcall 0x10010aec: init_posix_cpu_timers+0x0/0xe8()
Calling initcall 0x10010c0c: latency_init+0x0/0x3c()
" Calling initcall""..."
Calling initcall 0x10010d60: init_jiffies_clocksource+0x0/0x1c()
" Calling initcall 0x10010d7c: kallsyms_init+0x0""..."
Calling initcall 0x10011a54: init_per_zone_pages_min+0x0/0x50()
Calling initcall 0x10012578: pdflush_init+0x0/0x28()
" Calling init""..."
Calling initcall 0x10012608: init_tmpfs+0x0/0x4c()
Calling initcall 0x100126c4: cpucache_init+0x0/0x1c()
Calling initcall 0x10012cf0: fasync_init+0x0/0x4c()
Calling initcall 0x10013440: aio_setup+0x0/0x94()
" Calling initcall 0x1001375c: proc_nommu_init+0x0""..."
Calling initcall 0x10013c04: init_devpts_fs+0x0/0x40()
Calling initcall 0x10013c44: init_ext2_fs+0x0/0x7c()
" Calling initcall 0x10""..."
Calling initcall 0x10013cf8: init_romfs_fs+0x0/0x7c()
Calling initcall 0x10013f4c: noop_init+0x0/0x1c()
" ""..."
Calling initcall 0x10014140: rand_initialize+0x0/0x38()
Calling initcall 0x10014218: tty_init+0x0/0x184()
Calling initcall 0x1001439c: pty_init+0x0/0x388()
Calling initcall 0x10014960: rd_init+0x0/0x1c8()
" RAMDISK driver initialized: 16 RAM disks of 4096K s""..."
Calling initcall 0x10014b94: init_mtd+0x0/0x44()
Calling initcall 0x10014bd8: init_mtdchar+0x0/0x14c()
" Calling initcal""..."
Calling initcall 0x10014d40: map_rom_init+0x0/0x20()
Calling initcall 0x10014d60: uclinux_mtd_init+0x0/0x14c()
Most likely I think is that you don't have the uclinux.c MTD
map driver config options quite right. The ones that look
something like this:
CONFIG_MTD_UCLINUX=y
# CONFIG_MTD_UCLINUX_EBSS is not set
CONFIG_MTD_UCLINUX_ADDRESS=0x1400000
# CONFIG_MTD_UCLINUX_RAM is not set
CONFIG_MTD_UCLINUX_ROM=y
# CONFIG_MTD_PLATRAM is not set
Regards
Greg
------------------------------------------------------------------------
Greg Ungerer -- Chief Software Dude EMAIL: [EMAIL PROTECTED]
Secure Computing Corporation PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
