Hi CC Yuen,
Yuen Chi Chuen wrote:
In uClinux-dist/, after typing "arm-elf-gdb linux-2.6.x/linux"
I can enter GDB and then type target sim -> load -> run. However after
the run command, the console only shows "Starting program:
/root/Desktop/development/ARMulator_study/uClinux-dist/linux-2.6.x/linux",
the cursor stays here and no new messages are displayed.
Could any experts help on this issue?
The old ARMulator code is buggy. I run these images on the skyeye
emulator now days. Works much better.
Regards
Greg
----------------------------------------------------------------------------------------------------------------------------------------------------------------
[r...@localhost uClinux-dist]# arm-elf-gdb -n linux-2.6.x/linux
GNU gdb 5.0
Copyright 2000 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain
conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "--host=i686-pc-linux-gnu
--target=arm-elf"...(no debugging symbols found)...
(gdb) target sim
Loaded ROM boot.rom
Loaded ROM boot.rom
Loaded ROM boot.rom
Loaded ROM boot.rom
Connected to the simulator.
(gdb) load
Loading section .text.head, size 0x190 vma 0x1008000
Loading section .init, size 0xee60 vma 0x10081a0
Loading section .text, size 0xd163c vma 0x1017000
Loading section __param, size 0x1000 vma 0x10e9000
Loading section .data, size 0x9ac0 vma 0x10ea000
Start address 0x1008000
Transfer rate: 7702368 bits/sec.
(gdb) run
Starting program:
/root/Desktop/development/ARMulator_study/uClinux-dist/linux-2.6.x/linux
------------------------------------------------------------------------
Yahoo!香港提供網上安全攻略，教你如何防範黑客!*了解更多*
<http://hk.promo.yahoo.com/security/>
------------------------------------------------------------------------
Yahoo!香港提供網上安全攻略，教你如何防範黑客!*了解更多*
<http://hk.promo.yahoo.com/security/>
------------------------------------------------------------------------
------------------------------------------------------------------------
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
--
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: g...@snapgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
825 Stanley St, FAX: +61 7 3891 3630
Woolloongabba, QLD, 4102, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
