On Wed, Jan 06, 2010 at 07:18:41PM +0000, Philip Nye wrote: > Lennart Sorensen wrote: > ... >> We have a board using a coldfire 5270 with 8MB ram and 4MB flash, and >> that works fine. > > I have a similar setup with Coldfire 5272 and only 2MB flash which works > OK. As is common, my kernel and file system are kept in comppressed form > in flash and unpacked into RAM by the bootloader. The whole system then > runs in RAM.
Yeah in our case the flash actually only has the bootloader. We network boot via tftp using a uImage containing the kernel and initramfs and then run from the ramdisk. We have run from the flash before, but don't anymore. -- Len Sorensen _______________________________________________ uClinux-dev mailing list uClinux-dev@uclinux.org http://mailman.uclinux.org/mailman/listinfo/uclinux-dev This message was resent by uclinux-dev@uclinux.org To unsubscribe see: http://mailman.uclinux.org/mailman/options/uclinux-dev