Hi Angelo,
angelo wrote:
i downgraded from kernel 2.6.29 to 2.6.24, but i can't anymore get the
romfs that was running with the 2.6.29:
ttyS0 at 0x100001c0 (irq = 73) is a builtin ColdFire UART
ttyS1 at 0x10000200 (irq = 74) is a builtin ColdFire UART
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
nbd: registered device at major 43
dm9000 Ethernet Driver
physmap platform flash device: 00400000 at ffc00000
physmap-flash physmap-flash.0: map_probe failed
uclinux[mtd]: RAM probe address=0x16b500 size=0x53000
Creating 1 MTD partitions on "RAM":
0x00000000-0x00053000 : "ROMfs"
Generic platform RAM MTD, (c) 2004 Simtec Electronics
block2mtd: version $Revision: 1.30 $
TCP cubic registered
VFS: Cannot open root device "<NULL>" or unknown-block(0,0)
Please append a correct "root=" boot option; here are the available
partitions:
1f00 332 mtdblock0 (driver?)
Kernel panic - not syncing: VFS: Unable to mount root fs on
unknown-block(0,0)
You didn't show all the boot trace. Do you have a "root=/dev/mtdblock0"
set in the kernal args?
Regards
Greg
------------------------------------------------------------------------
Greg Ungerer -- Principal Engineer EMAIL: g...@snapgear.com
SnapGear Group, McAfee PHONE: +61 7 3435 2888
8 Gardner Close FAX: +61 7 3217 5323
Milton, QLD, 4064, Australia WEB: http://www.SnapGear.com
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
