Add support for the Freescale Coldfire M5441x; as these parts have an
enet-mac, add a quirk to distinguish them from the other Coldfire parts so we
can use the existing enet-mac support.
Signed-off-by: Steven king <sfk...@fdwdc.com>
---
drivers/net/ethernet/freescale/Kconfig | 5 ++---
drivers/net/ethernet/freescale/fec.c | 6 +++++-
drivers/net/ethernet/freescale/fec.h | 3 ++-
3 files changed, 9 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/freescale/Kconfig
b/drivers/net/ethernet/freescale/Kconfig
index 3574e14..f9aa244 100644
--- a/drivers/net/ethernet/freescale/Kconfig
+++ b/drivers/net/ethernet/freescale/Kconfig
@@ -7,7 +7,7 @@ config NET_VENDOR_FREESCALE
default y
depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \
M523x || M527x || M5272 || M528x || M520x || M532x || \
- ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM)
+ M5441x || ARCH_MXC || ARCH_MXS || (PPC_MPC52xx &&
PPC_BESTCOMM)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
@@ -22,8 +22,7 @@ if NET_VENDOR_FREESCALE
config FEC
tristate "FEC ethernet controller (of ColdFire and some i.MX CPUs)"
- depends on (M523x || M527x || M5272 || M528x || M520x || M532x || \
- ARCH_MXC || SOC_IMX28)
+ depends on (M523x || M527x || M5272 || M528x || M520x || M532x ||
M5441x || ARCH_MXC || SOC_IMX28)
default ARCH_MXC || SOC_IMX28 if ARM
select PHYLIB
---help---
diff --git a/drivers/net/ethernet/freescale/fec.c
b/drivers/net/ethernet/freescale/fec.c
index ff7f4c5..9567667 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -94,6 +94,9 @@ static struct platform_device_id fec_devtype[] = {
.name = "imx6q-fec",
.driver_data = FEC_QUIRK_ENET_MAC | FEC_QUIRK_HAS_GBIT,
}, {
+ .name = "enet-fec",
+ .driver_data = FEC_QUIRK_ENET_MAC,
+ }, {
/* sentinel */
}
};
@@ -187,7 +190,8 @@ MODULE_PARM_DESC(macaddr, "FEC Ethernet MAC address");
* account when setting it.
*/
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) ||
\
- defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM)
+ defined(CONFIG_M520x) || defined(CONFIG_M532x) || defined(CONFIG_ARM) || \
+ defined(CONFIG_M5441x)
#define OPT_FRAME_SIZE (PKT_MAXBUF_SIZE << 16)
#else
#define OPT_FRAME_SIZE 0
diff --git a/drivers/net/ethernet/freescale/fec.h
b/drivers/net/ethernet/freescale/fec.h
index 8408c62..298cfb7 100644
--- a/drivers/net/ethernet/freescale/fec.h
+++ b/drivers/net/ethernet/freescale/fec.h
@@ -15,7 +15,8 @@
#if defined(CONFIG_M523x) || defined(CONFIG_M527x) || defined(CONFIG_M528x) ||
\
defined(CONFIG_M520x) || defined(CONFIG_M532x) || \
- defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28)
+ defined(CONFIG_ARCH_MXC) || defined(CONFIG_SOC_IMX28) || \
+ defined(CONFIG_M5441x)
/*
* Just figures, Motorola would have to change the offsets for
* registers in the same peripheral device on different models
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
