From: Greg Ungerer <g...@uclinux.org>
Some of the code in the existing mm/init_mm.c and mm/init_no.c files is
the same, and if we merge them back to a single file we can save some code
duplication.
Although the old mem_init() code for non-MMU was a little different than
the MMU version, it turns out we can use the same code. So I now we just
use the MMU mem_init() code for all. It also means we now get identical
console info messages for this code on kernel boot up.
So merge the two files back into a single file.
Signed-off-by: Greg Ungerer <g...@uclinux.org>
---
Note that for easier review this was generated with -M.
arch/m68k/mm/{init_mm.c => init.c} | 73 ++++++++++++++++--
arch/m68k/mm/init_no.c | 145 ------------------------------------
2 files changed, 64 insertions(+), 154 deletions(-)
rename arch/m68k/mm/{init_mm.c => init.c} (72%)
delete mode 100644 arch/m68k/mm/init_no.c
diff --git a/arch/m68k/mm/init_mm.c b/arch/m68k/mm/init.c
similarity index 72%
rename from arch/m68k/mm/init_mm.c
rename to arch/m68k/mm/init.c
index 282f9de..d0286db 100644
--- a/arch/m68k/mm/init_mm.c
+++ b/arch/m68k/mm/init.c
@@ -32,6 +32,15 @@
#include <asm/sections.h>
#include <asm/tlb.h>
+/*
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+void *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
+
+#ifdef CONFIG_MMU
+
pg_data_t pg_data_map[MAX_NUMNODES];
EXPORT_SYMBOL(pg_data_map);
@@ -60,20 +69,65 @@ void __init m68k_setup_node(int node)
node_set_online(node);
}
+extern void init_pointer_table(unsigned long ptable);
+extern pmd_t *zero_pgtable;
+
+#else /* CONFIG_MMU */
/*
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
+ * paging_init() continues the virtual memory environment setup which
+ * was begun by the code in arch/head.S.
+ * The parameters are pointers to where to stick the starting and ending
+ * addresses of available kernel virtual memory.
*/
+void __init paging_init(void)
+{
+ /*
+ * Make sure start_mem is page aligned, otherwise bootmem and
+ * page_alloc get different views of the world.
+ */
+ unsigned long end_mem = memory_end & PAGE_MASK;
+ unsigned long zones_size[MAX_NR_ZONES] = { 0, };
-void *empty_zero_page;
-EXPORT_SYMBOL(empty_zero_page);
+ high_memory = (void *) end_mem;
-extern void init_pointer_table(unsigned long ptable);
+ empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
+ memset(empty_zero_page, 0, PAGE_SIZE);
-/* References to section boundaries */
+ /*
+ * Set up SFC/DFC registers (user data space).
+ */
+ set_fs (USER_DS);
-extern pmd_t *zero_pgtable;
+ zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
+ free_area_init(zones_size);
+}
+
+void free_initmem(void)
+{
+#ifdef CONFIG_RAMKERNEL
+ unsigned long addr;
+
+ /*
+ * The following code should be cool even if these sections
+ * are not page aligned.
+ */
+ addr = PAGE_ALIGN((unsigned long) __init_begin);
+ /* next to check that the page we free is not a partial page */
+ for (; addr + PAGE_SIZE < ((unsigned long) __init_end); addr +=
PAGE_SIZE) {
+ ClearPageReserved(virt_to_page(addr));
+ init_page_count(virt_to_page(addr));
+ free_page(addr);
+ totalram_pages++;
+ }
+ pr_notice("Freeing unused kernel memory: %luk freed (0x%x - 0x%x)\n",
+ (addr - PAGE_ALIGN((unsigned long) __init_begin)) >> 10,
+ (int)(PAGE_ALIGN((unsigned long) __init_begin)),
+ (int)(addr - PAGE_SIZE));
+#endif
+}
+
+#endif /* CONFIG_MMU */
#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE)
#define VECTORS &vectors[0]
@@ -151,7 +205,7 @@ void __init mem_init(void)
init_pointer_table((unsigned long)zero_pgtable);
#endif
- printk("Memory: %luk/%luk available (%dk kernel code, %dk data, %dk
init)\n",
+ pr_info("Memory: %luk/%luk available (%dk kernel code, %dk data, %dk
init)\n",
nr_free_pages() << (PAGE_SHIFT-10),
totalram_pages << (PAGE_SHIFT-10),
codepages << (PAGE_SHIFT-10),
@@ -171,6 +225,7 @@ void free_initrd_mem(unsigned long start, unsigned long end)
totalram_pages++;
pages++;
}
- printk ("Freeing initrd memory: %dk freed\n", pages);
+ pr_notice("Freeing initrd memory: %luk freed\n",
+ pages << (PAGE_SHIFT - 10));
}
#endif
diff --git a/arch/m68k/mm/init_no.c b/arch/m68k/mm/init_no.c
deleted file mode 100644
index 688e366..0000000
--- a/arch/m68k/mm/init_no.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/*
- * linux/arch/m68knommu/mm/init.c
- *
- * Copyright (C) 1998 D. Jeff Dionne <j...@lineo.ca>,
- * Kenneth Albanowski <kja...@kjahds.com>,
- * Copyright (C) 2000 Lineo, Inc. (www.lineo.com)
- *
- * Based on:
- *
- * linux/arch/m68k/mm/init.c
- *
- * Copyright (C) 1995 Hamish Macdonald
- *
- * JAN/1999 -- hacked to support ColdFire (g...@snapgear.com)
- * DEC/2000 -- linux 2.4 support <dav...@snapgear.com>
- */
-
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/ptrace.h>
-#include <linux/mman.h>
-#include <linux/mm.h>
-#include <linux/swap.h>
-#include <linux/init.h>
-#include <linux/highmem.h>
-#include <linux/pagemap.h>
-#include <linux/bootmem.h>
-#include <linux/gfp.h>
-
-#include <asm/setup.h>
-#include <asm/sections.h>
-#include <asm/segment.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-
-/*
- * ZERO_PAGE is a special page that is used for zero-initialized
- * data and COW.
- */
-void *empty_zero_page;
-
-/*
- * paging_init() continues the virtual memory environment setup which
- * was begun by the code in arch/head.S.
- * The parameters are pointers to where to stick the starting and ending
- * addresses of available kernel virtual memory.
- */
-void __init paging_init(void)
-{
- /*
- * Make sure start_mem is page aligned, otherwise bootmem and
- * page_alloc get different views of the world.
- */
- unsigned long end_mem = memory_end & PAGE_MASK;
- unsigned long zones_size[MAX_NR_ZONES] = {0, };
-
- empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
- memset(empty_zero_page, 0, PAGE_SIZE);
-
- /*
- * Set up SFC/DFC registers (user data space).
- */
- set_fs (USER_DS);
-
- zones_size[ZONE_DMA] = (end_mem - PAGE_OFFSET) >> PAGE_SHIFT;
- free_area_init(zones_size);
-}
-
-void __init mem_init(void)
-{
- int codek = 0, datak = 0, initk = 0;
- unsigned long tmp;
- unsigned long len = _ramend - _rambase;
- unsigned long start_mem = memory_start; /* DAVIDM - these must start at
end of kernel */
- unsigned long end_mem = memory_end; /* DAVIDM - this must not include
kernel stack at top */
-
- pr_debug("Mem_init: start=%lx, end=%lx\n", start_mem, end_mem);
-
- end_mem &= PAGE_MASK;
- high_memory = (void *) end_mem;
-
- start_mem = PAGE_ALIGN(start_mem);
- max_mapnr = num_physpages = (((unsigned long) high_memory) -
PAGE_OFFSET) >> PAGE_SHIFT;
-
- /* this will put all memory onto the freelists */
- totalram_pages = free_all_bootmem();
-
- codek = (_etext - _stext) >> 10;
- datak = (__bss_stop - _sdata) >> 10;
- initk = (__init_begin - __init_end) >> 10;
-
- tmp = nr_free_pages() << PAGE_SHIFT;
- printk(KERN_INFO "Memory available: %luk/%luk RAM, (%dk kernel code,
%dk data)\n",
- tmp >> 10,
- len >> 10,
- codek,
- datak
- );
-}
-
-
-#ifdef CONFIG_BLK_DEV_INITRD
-void free_initrd_mem(unsigned long start, unsigned long end)
-{
- int pages = 0;
- for (; start < end; start += PAGE_SIZE) {
- ClearPageReserved(virt_to_page(start));
- init_page_count(virt_to_page(start));
- free_page(start);
- totalram_pages++;
- pages++;
- }
- pr_notice("Freeing initrd memory: %luk freed\n",
- pages * (PAGE_SIZE / 1024));
-}
-#endif
-
-void free_initmem(void)
-{
-#ifdef CONFIG_RAMKERNEL
- unsigned long addr;
- /*
- * The following code should be cool even if these sections
- * are not page aligned.
- */
- addr = PAGE_ALIGN((unsigned long) __init_begin);
- /* next to check that the page we free is not a partial page */
- for (; addr + PAGE_SIZE < ((unsigned long) __init_end); addr +=
PAGE_SIZE) {
- ClearPageReserved(virt_to_page(addr));
- init_page_count(virt_to_page(addr));
- free_page(addr);
- totalram_pages++;
- }
- pr_notice("Freeing unused kernel memory: %luk freed (0x%x - 0x%x)\n",
- (addr - PAGE_ALIGN((unsigned long) __init_begin)) >> 10,
- (int)(PAGE_ALIGN((unsigned long) __init_begin)),
- (int)(addr - PAGE_SIZE));
-#endif
-}
-
--
1.7.0.4
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
