Hi Christian,
On 24/01/13 00:00, Christian Gieseler wrote:
No, nothing has changed in this area. I have run 3.6 kernels on ColdFire
boards using romfs setups the same as every kernel before.
Can you tell me one example in the 20121024 release that you have
successfully running so that I can maybe have a look at the config.
Yeah, try the Freescale/M5208EVB. Here is its bootup trace
(this was generated from 20121004 and run today).
Regards
Greg
Linux version 3.6.0-uc0 (gerg@goober) (gcc version 4.5.1 (GCC) ) #1 Thu Jan 24
09:59:43 EST 2013
uClinux/COLDFIRE(m520x)
COLDFIRE port done by Greg Ungerer, g...@snapgear.com
Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4080
Kernel command line:
PID hash table entries: 2048 (order: 0, 8192 bytes)
Dentry cache hash table entries: 4096 (order: 1, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 0, 8192 bytes)
Memory available: 29832k/32768k RAM, (1372k kernel code, 327k data)
SLUB: Genslabs=15, HWalign=16, Order=0-3, MinObjects=0, CPUs=1, Nodes=8
NR_IRQS:256
Calibrating delay loop... 109.46 BogoMIPS (lpj=547328)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 1024
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource pit
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 8192 bytes)
TCP bind hash table entries: 2048 (order: 0, 8192 bytes)
TCP: Hash tables configured (established 1024 bind 2048)
TCP: reno registered
UDP hash table entries: 512 (order: 0, 8192 bytes)
UDP-Lite hash table entries: 512 (order: 0, 8192 bytes)
NET: Registered protocol family 1
ROMFS MTD (C) 2007 Red Hat, Inc.
io scheduler noop registered (default)
ColdFire internal UART serial driver
ttyS0 at MMIO 0xfc060000 (irq = 90) is a ColdFire UART
console [ttyS0] enabled
ttyS1 at MMIO 0xfc064000 (irq = 91) is a ColdFire UART
ttyS2 at MMIO 0xfc068000 (irq = 92) is a ColdFire UART
brd: module loaded
uclinux[mtd]: RAM probe address=0x401c918c size=0xde000
uclinux[mtd]: set ROMfs to be root filesystem
Creating 1 MTD partitions on "RAM":
0x000000000000-0x0000000de000 : "ROMfs"
libphy: fec_enet_mii_bus: probed
TCP: cubic registered
NET: Registered protocol family 17
VFS: Mounted root (romfs filesystem) readonly on device 31:0.
Freeing unused kernel memory: 48k freed (0x401b0000 - 0x401ba000)
Shell invoked to run file: /etc/rc
Command: hostname uClinux
Command: /bin/expand /etc/ramfs.img /dev/ram1
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram1 /var
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: mkdir /var/empty
Command: mkdir /var/dhcpc
Command: ifconfig lo 127.0.0.1
Command: route add -net 127.0.0.0 netmask 255.0.0.0 lo
Command: dhcpcd -p -a eth0 &
[22]
Command: cat /etc/motd
eth0: Freescale FEC PHY driver [Generic PHY] (mii_bus:phy_addr=fec-1:01, irq=-1)
Welcome to
____ _ _
/ __| ||_|
_ _| | | | _ ____ _ _ _ _
| | | | | | || | _ \| | | |\ \/ /
| |_| | |__| || | | | | |_| |/ \
| ___\____|_||_|_| |_|\____|\_/\_/
| |
|_|
For further information check:
http://www.uclinux.org/
Execution Finished, Exiting
Sash command shell (version 1.1.1)
/>
_______________________________________________
uClinux-dev mailing list
uClinux-dev@uclinux.org
http://mailman.uclinux.org/mailman/listinfo/uclinux-dev
This message was resent by uclinux-dev@uclinux.org
To unsubscribe see:
http://mailman.uclinux.org/mailman/options/uclinux-dev
