Hallo List,
I stumbled a bit while I reviewed the imageio code:
- What are the supported file extensions for NITF? I assumed that
would be *.on1,*.on2,*.on5
- In the catalog.imagio ImageServiceExtension class I found the following lines:
driverCode="NITF";
if(GDALUtilities.isDriverAvailable(driverCode))
{
factories.put(driverCode, new
NITFFormatFactory());
fileExtensions.put(driverCode,Arrays.asList("jp2","j2k"));
}
I guess the fileExtensions.put() line is wrong. IMHO
- I tested to add a NTIF layer (Add Data Wizard -> Files) with the
file 001zc013.on1 (downloaded from
http://dl.maptools.org/dl/gdal/data/nitf/cadrg/) It was selectable but
the wizard cant be finished...
In addition to the NITF Format the HFA Driver seems to be wrong ether:
// HFA
driverCode="HFA";
if(GDALUtilities.isDriverAvailable(driverCode))
{
factories.put(driverCode, new
ErdasImgFormatFactory());
fileExtensions.put(driverCode,Arrays.asList("dt0","dt1", "dt2"));
}
which should properly look like this
// HFA
driverCode="HFA";
if(GDALUtilities.isDriverAvailable(driverCode))
{
factories.put(driverCode, new
ErdasImgFormatFactory());
fileExtensions.put(driverCode,Arrays.asList("img"));
}
Can anybody help to clarify? Thanks a lot!
Frank
_______________________________________________
User-friendly Desktop Internet GIS (uDig)
http://udig.refractions.net
http://lists.refractions.net/mailman/listinfo/udig-devel
