Well, I try to install the ueagle driver for my Sagem [EMAIL PROTECTED] 800, Free dégroupé, Gentoo, 2.6.16-rc1. I have not all understand. My way : 1-Download the source of your kernel, choose the good options, compile it and restart with it. 2-Download the firmware(s) of the modem, and the config file 3-Put it in the good dir (/lib/firmware in my case) 4-Set the config. <- Well, where, how, with what Doc ? 5- Plug in the modem 6-Set up the config system (ifconfig, route & Co.) 7-It works !
Some suggestion : -A script which can do alone the config of the system -A doc (or a tutarial as my mail) I'm blocked to the step 4. dmesg looks good : usb 1-1: new full speed USB device using uhci_hcd and address 5 usb 1-1: configuration #1 chosen from 1 choice usb 1-1: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) : Eagle I usb 1-1: reset full speed USB device using uhci_hcd and address 5 usb 1-1: [ueagle-atm] (re)booting started But I don't know where is the config ? (In CMV file ?) And when I have booted, I get error from ueagle... (My driver is compiled IN the bzImage, not in modules). VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 148k freed usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSPep.bin failed with error -2 usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSPep.bin failed with error -2 usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSPep.bin failed with error -2 usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSPep.bin failed with error -2 usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [UEAGLE-ATM] requesting firmware ueagle-atm/DSPep.bin failed with error -2 usb 1-1: [ueagle-atm] (re)booting started usb 1-1: [UEAGLE-ATM] wrong intr XFS mounting filesystem dm-1 Ending clean XFS mount for filesystem: dm-1 Adding 1048568k swap on /dev/disque/swap. Priority:-1 extents:1 across:1048568k eth0: link up, 100Mbps, full-duplex, lpa 0x41E1 usb 1-1: [UEAGLE-ATM] uea_intr() failed with -84 usb 1-1: [UEAGLE-ATM] usb_control_msg error -71 usb 1-1: [UEAGLE-ATM] reading cmv failed with error -71 usb 1-1: USB disconnect, address 2 eth0: no IPv6 routers present usb 1-1: [ueagle-atm] kthread finish with status -71 usb 1-1: [UEAGLE-ATM] usb_control_msg error -19 usb 1-1: [ueagle-atm] ADSL device removed <- I have really removed the modem after the bugs) (eth0 is a ethernet board, not my Fast800) Bye -- Chtitux - Théophile Helleboid
