Hi Steve, Yes. I do run Linux - MontaVista. At the bootstrap stage there is no OS. It just a basic program that enables the serial console && the ethernet. So by implemeting the UIP - I could only confirm via ethereal that the ARP requests are getting a reply out from the board. I could add the ICMP just to have the ping completely work but ..... my main interest is the tftp Is it possible to have access at your tftp client ? Any legal issues ? Open Source ? Etc ..... Thanks, Dan S.
________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steve DeLaney Sent: Monday, March 19, 2007 11:15 AM To: uip-users@sics.se Subject: RE: [uip-users] Question uip && tftp Hi Dan, I recently completed a tftp client for uip 1.0 on a Winbond 78LE516 8 bit controller are you running an RTOS? ________________________________ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dan Sirbu (QA/EMC) Sent: Monday, March 19, 2007 5:34 AM To: uip-users@sics.se Subject: [uip-users] Question uip && tftp Hi, I would like to know if someone has already an example of tftp client that runs under uip. I am writing a bootloader for a PPC board that is custom made and the u-boot cannot be ported to it. I use the UIP to have the tcp/ip stack && seems that goes ok. I need to add the tftp on top to be able to ftp a linux kernel from outside the box. If you have a working example please let me know. Thanks, Dan Sirbu