Hi, > > If i read the fuses after the first power-up without specifying a part > > (auto detect) i get: > > (...) > > If i just repeat the exact same command i get: > > (...) > > Device is locked. > > Address out of memory range. > > This is a wild guess, but it sounds to me like there's a hardware > problem. Could you please check that the "reset" circuit is correct? > > The programming cable has to have a correct electrical way of getting > to the reset pin of the microcontroller. And your situation sounds > like the reset is not working properly.
i solved the problem with some hints i got on the avr-gcc-list. The level on PEN was wrong. It is not a problem of uisp. Best regards, Torsten. _______________________________________________ Uisp-dev mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/uisp-dev
