In all the mails on the unattended list I saw
- driver e1000e is integrated in the cvs
- nt5x-install is integrated in the cvs. Very good news ...
- I used the same glibc as this on my computer (glibc-2.3.6)
- I used too samba-3.0.20 and perl-5.8.8
Make download. OK
Make tftpboot OK
So, I tried to boot an Dell Optiplex 755 with PXE, and I saw this messages:
...................
*** Now that we have loaded the modules (maybe) let's try DHCP ...
*** Trying DHCP on eth0
udhcpc (v1.9.2) started
0000:00:19.0 :eth0 Unable to allocate MSI Interrupt Error -1
Sending Discover
0000:00:19.0 :eth0: Link is up 100 Mbps Full Duplex Flow Control: RX/TX
0000:00:19.0 :eth0: 10/100 speed: disabling TSO
and now, the computer freezes.
I used: linux-2.6.24.4 glibc-2.3.6 perl-5.8.8 .......
I'll try with linux-2.6.24.3
Régis
--
==================================================================
| Régis Gras | http://dcm.ujf-grenoble.fr |
| D.C.M. | mailto:[EMAIL PROTECTED] |
| 301, rue de la chimie | -------------- |
| DU BP 53 | Tel 04 76 51 41 76 |
| 38041 Grenoble Cedex 9 | Fax 04 76 51 40 89 |
==================================================================
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
_______________________________________________
unattended-info mailing list
unattended-info@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/unattended-info
