When you say you can't open the plugins tab is there any information in the log as to what is going on? If you're able to at least see the settings interface then Squeezebox Server (SBS) is using the IP address you're expecting (presumably, depending on how you've got those two interfaces wired up), and I don't think a failure of just the plugins page would indicate anything fundamental like IP address issues.
On my test server I can access the plugins page and see things under the internet radio section (eg "Staff Picks"). I would initially check the logs to see if there are any clues (/var/log/squeezeboxserver/server.log). I've not checked, but I think SBS might bind to all addresses by default - I can certainly reach it from both the public IP address (eg 192.168.0.1) and the loopback interface (127.0.0.1). Stuart On 25/01/2011 16:11, albright wrote: > Sorry to reply to myself, but I got it working (copied the 85 ebuild > to 84 ...). > > But this has NOT solved my problem. > > When I go to server settings page I cannot open the plugins tab > and there is no internet radio on the home page except for "tune > in URL". > > My only hypothesis is this: I notice that the server ip seems to have > changed. I have two interfaces, eth0 = 192.168.0.1 and eth1 = > 192.168.2.10. Eth0 is the local home network; eth1 is connected > to a router/adsl modem. > > I'm pretty sure that squeezebox server used to take the home > network address before my problems began. > > Is it possible to set the server ip that squeezebox uses? > > -- Stuart _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
