kolossos4730 wrote: 
> Squeezed_Rotel,
> 
> You could also add a hardware switch to P9 and unmute the Pi-AMP with
> this switch after power-up.
> 
> If you have an IQaudIO Pi-DAC an Pi-AMP combination you can take this a
> step further by having the volume slider in the LMS web interface
> controlling the hardware volume mixer of the Pi-DAC.
> 
> This requires Squeezelite 1.8 and the easiest way to update to this
> version is to use the web interface of piCorePlayer. On the Main Page
> update to the Ralphys newest version (Triode does not yet provide a
> compiled 1.8 version). After this you should see Squeezelite v1.8 on the
> statusbar at the bottom of the webpage.
> 
> Next enter the following parameters in the Various input box on the
> Squeezelite Settings page : -V PCM (case sensitive!)
> 
> To be sure reboot your piCorePlayer. SSH into piCorePlayer and enter
> alsamixer -c 1 (or use F6 to choose the Pi-DAC). Now you should see the
> PCM bar move up and down when you adjust the volume slider on the LMS
> webinterface. This should also work when controlling LMS via SqueezePad
> or iPeng.
> 
> For all of this to work Volume Control for the player should be
> configured as 'Volume controls adjust outputs' in the LMS Audio settings
> pages for this player.

Thanks once again kolossos. I just adopted the above changes, and I'm
changing the volume with iPeng, and watching the PCM bar react!
Now, concerning the switch on P9; momentary or non momentary?
TIA,
John



John Marshall
LMS 7.9 running on a DIY PC, Windows 7 64 bit, (1) Transporter, (4)
Booms & (2) CSOS SqueezeliteWands, (4) piCorePlayers. SqueezePad & iPeng
for controllers.
Music Room setup: Transporter => Rotel RC1070 preamp => Rotel RB1080 2
channel amp => Bowers & Wilkins 805 Speakers.
Headphone setup: SqueezeliteWandQuad => Mytek 192 DAC => Woo Audio WA22
balanced headphone amp => Sennheiser HD800 headphones.
------------------------------------------------------------------------
Squeezed_Rotel's Profile: http://forums.slimdevices.com/member.php?userid=30002
View this thread: http://forums.slimdevices.com/showthread.php?t=97803

_______________________________________________
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix

Reply via email to