Hi Harry, The code will control when the backlight/display is turned off and on. Are you sure the following line of code matches your MAC address that is specific to the Pi?
sq = sc.get_player("AA:BB:CC:00:11:22") Harryl89 wrote: > Hi > > I´ve tried this image from thesterk.com and everything was working > fine. > > Tried the SD in two Hardware setups and moving the SD from one Raspy > with Display to another works fine, both displays work fine so the > wiring is ok. > > Since i tried to edit some modes (don´t want to see the remain a.s.o) > somewhere in the editing of the readsq.py I made a big mistake and the > Displays won´t work any longer. > > So I tried everything from beginning (burn new Image to the SD, update > picore to 1.19 as I´ve done before) but I didn´t get the Display back to > work. > > I also tried a third raspy to see if I have destroied the GPIO´s, but > still the same. > > I have no glue what´s going wrong since both setups already worked, so > the wiring is OK (i soldered direct to the GPIO and Display with > isolation to protect against shortcut) > > When booting I can see a dimmed backlight, first line transparent as it > should be, but when picore is up and running the backlight doesnt switch > on (it switches off, no dimmed light visible) and no char. are shown. > Manually switching on the backlight by wire is ok, but still noch > characters visible. > > Squeezelight is running since i can hear music with the analog output or > HiFiBerry AMP. > > Tried with update picore and without... > > What I´ve seen is when using the original image from thesterk without > updating picore squeezelite on picore starts, but when updating to 1.19 > in the first step the squeezelite doesn´t start > automatically after rebboting the raspy, but can be started manually via > Web-Gui. > > I´ve checked the settings in the bootlocal.sh and readsq.py and it looks > like it should be, also storing the bootlocal with filetool.sh -b shows > that the settings are stored. > I also use WinSCP to check if the settings are correct (comment out the > "popen...squeezelite...stop&start lines) > > I use win32diskimager, SanDisk Ultra microSDHC 8GB Class 10 with SD > Adapter, burn the image on different Machines (WinXP and Win7/64) > > Checked the wiring for x times on both raspy´s (but as mentioned it > worked when i first tried the picorelcd - image) > > > ??? ------------------------------------------------------------------------ dustinsterk's Profile: http://forums.slimdevices.com/member.php?userid=19649 View this thread: http://forums.slimdevices.com/showthread.php?t=101269
_______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix