Just took the card out of the pi and installed directly - worked,
running, nice.

Thanks,

Rainer

Rainer M Krug <rai...@krugs.de> writes:

> Thanks for this new version - it sounds really nice!
>
> But I have problems with the update from the web GUI. Iget the following
> result:
>
> [ INFO ] Mounting /mnt/mmcblk0p1...
>
> [ INFO ] Your config has been saved so your current settings will used be 
> after updating piCorePlayer.
>
> [ INFO ] Untarring piCorePlayer2.00_boot.tar.gz...
> mnt/mmcblk0p1/
> mnt/mmcblk0p1/7.0.gz
> mnt/mmcblk0p1/COPYING.linux
> mnt/mmcblk0p1/LICENCE.broadcom
> mnt/mmcblk0p1/README
> mnt/mmcblk0p1/RELEASE
> mnt/mmcblk0p1/7.0v7.gz
> mnt/mmcblk0p1/bcm2709-rpi-2-b.dtb
> mnt/mmcblk0p1/bootcode.bin
> mnt/mmcblk0p1/cmdline.txt
> mnt/mmcblk0p1/config.txt
> mnt/mmcblk0p1/fixup.dat
> mnt/mmcblk0p1/fixup_cd.dat
> mnt/mmcblk0p1/fixup_db.dat
> mnt/mmcblk0p1/fixup_x.dat
> mnt/mmcblk0p1/overlays/
> mnt/mmcblk0p1/overlays/hifiberry-amp-overlay.dtb
> mnt/mmcblk0p1/overlays/spi-bcm2835-overlay.dtb
> mnt/mmcblk0p1/overlays/smi-dev-overlay.dtb
> mnt/mmcblk0p1/overlays/hifiberry-digi-overlay.dtb
> mnt/mmcblk0p1/overlays/tinylcd35-overlay.dtb
> mnt/mmcblk0p1/overlays/hy28a-overlay.dtb
> mnt/mmcblk0p1/overlays/pwm-2chan-overlay.dtb
> mnt/mmcblk0p1/overlays/at86rf233-overlay.dtb
> mnt/mmcblk0p1/overlays/piscreen2r-overlay.dtb
> mnt/mmcblk0p1/overlays/dht11-overlay.dtb
> mnt/mmcblk0p1/overlays/lirc-rpi-overlay.dtb
> mnt/mmcblk0p1/overlays/vga666-overlay.dtb
> mnt/mmcblk0p1/overlays/rpi-display-overlay.dtb
> mnt/mmcblk0p1/overlays/piscreen-overlay.dtb
> mnt/mmcblk0p1/overlays/i2c-rtc-overlay.dtb
> mnt/mmcblk0p1/overlays/rpi-proto-overlay.dtb
> mnt/mmcblk0p1/overlays/smi-nand-overlay.dtb
> mnt/mmcblk0p1/overlays/spi-bcm2708-overlay.dtb
> mnt/mmcblk0p1/overlays/hy28b-overlay.dtb
> mnt/mmcblk0p1/overlays/spi-dma-overlay.dtb
> mnt/mmcblk0p1/overlays/sdio-overlay.dtb
> mnt/mmcblk0p1/overlays/mz61581-overlay.dtb
> mnt/mmcblk0p1/overlays/sdhost-overlay.dtb
> mnt/mmcblk0p1/overlays/hifiberry-dacplus-overlay.dtb
> mnt/mmcblk0p1/overlays/pps-gpio-overlay.dtb
> mnt/mmcblk0p1/overlays/hifiberry-dac-overlay.dtb
> mnt/mmcblk0p1/overlays/rpi-backlight-overlay.dtb
> mnt/mmcblk0p1/overlays/pitft28-resistive-overlay.dtb
> mnt/mmcblk0p1/overlays/rpi-dac-overlay.dtb
> mnt/mmcblk0p1/overlays/mmc-overlay.dtb
> mnt/mmcblk0p1/overlays/mcp2515-can1-overlay.dtb
> mnt/mmcblk0p1/overlays/uart1-overlay.dtb
> mnt/mmcblk0p1/overlays/smi-overlay.dtb
> mnt/mmcblk0p1/overlays/README
> mnt/mmcblk0p1/overlays/rpi-sense-overlay.dtb
> mnt/mmcblk0p1/overlays/enc28j60-overlay.dtb
> mnt/mmcblk0p1/overlays/mcp2515-can0-overlay.dtb
> mnt/mmcblk0p1/overlays/iqaudio-dacplus-overlay.dtb
> mnt/mmcblk0p1/overlays/gpio-poweroff-overlay.dtb
> mnt/mmcblk0p1/overlays/iqaudio-dac-overlay.dtb
> mnt/mmcblk0p1/overlays/w1-gpio-pullup-overlay.dtb
> mnt/mmcblk0p1/overlays/w1-gpio-overlay.dtb
> mnt/mmcblk0p1/overlays/raspidac3-overlay.dtb
> mnt/mmcblk0p1/overlays/pwm-overlay.dtb
> mnt/mmcblk0p1/overlays/i2s-mmap-overlay.dtb
> mnt/mmcblk0p1/overlays/ads7846-overlay.dtb
> mnt/mmcblk0p1/overlays/bmp085_i2c-sensor-overlay.dtb
> mnt/mmcblk0p1/overlays/rpi-ft5406-overlay.dtb
> mnt/mmcblk0p1/overlays/gpio-ir-overlay.dtb
> mnt/mmcblk0p1/overlays/i2c-gpio-overlay.dtb
> mnt/mmcblk0p1/overlays/pitft28-capacitive-overlay.dtb
> mnt/mmcblk0p1/start.elf
> mnt/mmcblk0p1/start_cd.elf
> mnt/mmcblk0p1/start_x.elf
> mnt/mmcblk0p1/LICENCE.piCorePlayer
> mnt/mmcblk0p1/kernel4113v7.img
> mnt/mmcblk0p1/kernel4113.img
>
> [ INFO ] Unmounting /mnt/mmcblk0p1...
>
> [ ERROR ] piCorePlayer has NOT been updated.
>
> Is there anywhere where I can see the full log why it failed?
>
>
> sbp <sbp.79i...@no-mx.forums.slimdevices.com> writes:
>
>> Hi all.
>>
>> We are ready to release a major update to piCorePlayer - so we decided
>> to call i version 2.00 and start a new thread. 
>> The old one is huge and has been read more than 700.000 times, therefore
>> it is time for a new thread.
>> So thank you all for your continued interest and support.
>>
>> THE MAJOR CHANGES ARE:    
>> - Only *one version of piCorePlayer*, but it can now run on all known
>>   raspberry boards. So you can use the same piCorePlayer image for all
>>   your players.
>>   
>>
>>
>>
>>     
>> - *Shairport-sync* is supported and can be enabled from the "tweaks"
>>   page. It will automatically show on your iDevice (iPad or iPhone) with
>>   the name you have given your piCorePlayer. This means that you now can
>>   stream from your iDevices to piCorePlayer. It will automatically
>>   switch from squeezelite to shairport and vice versa. Just stop/pause
>>   either squeezelite or Shairport.
>>   
>>
>>
>>
>>     
>> - *piCorePlayer menu applet in* *Jivelite. *This means that you will
>>   have a specific piCorePlayer menu in Jivelite. From here you can
>>   reboot and save eventual changes from within Jivelite. This menu is
>>   installed from your running LMS server. At the bottom of the Plugin
>>   page in LMS you will need to add piCorePlayer repro:
>>   http://picoreplayer.sourceforge.net/repo.xml  Save.
>>             
>>   - Then you go to Jivelite on the piCorePlayer. Settings - Advanced -
>>     Applet installer - piCorePlayer menu - Install.
>>   - Next use the arrow in the top left corner to get to the main menu.
>>     Choose "quit" in the bottom of the screen (this will restart
>>     Jivelite - so the piCorePlayer menu is visible).
>>   - Go to Settings - choose piCorePlayer and select "Save settings to
>>     SD-card"
>>         
>>   
>>
>>
>>
>>     
>> - Kernel updated to 4.1.13 and piCore to version 7.0.
>>   
>>
>> Because this version is so different from the others it is not possible
>> to use the "In situ" upgrade/downgrade system to go down from version
>> 2.00 to a previous version. If you for some reason want to use an older
>> version you will have to download the previous version and burn it to
>> your SD-card.
>>
>> Please try it out. For this version Ralphy has been a tremendous help
>> and he build the shairport-sync with all its dependencies. Kolossos made
>> the piCorePlayer menu script. 
>>
>> Regards
>> Greg, Ralphy and Steen
>>
>>
>>
>> piCorePlayer a small player for the Raspberry Pi in RAM. 
>> Homepage: https://sites.google.com/site/picoreplayer/home
>>
>> *Please 'donate'
>> (https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=U7JHY5WYHCNRU&lc=GB&currency_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted)
>> if you like the piCorePlayer*
>> ------------------------------------------------------------------------
>> sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237
>> View this thread: http://forums.slimdevices.com/showthread.php?t=105018
>>
>> _______________________________________________
>> unix mailing list
>> unix@lists.slimdevices.com
>> http://lists.slimdevices.com/mailman/listinfo/unix

-- 
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, 
UCT), Dipl. Phys. (Germany)

Centre of Excellence for Invasion Biology
Stellenbosch University
South Africa

Tel :       +33 - (0)9 53 10 27 44
Cell:       +33 - (0)6 85 62 59 98
Fax :       +33 - (0)9 58 10 27 44

Fax (D):    +49 - (0)3 21 21 25 22 44

email:      rai...@krugs.de

Skype:      RMkrug

PGP: 0x0F52F982

Attachment: signature.asc
Description: PGP signature

_______________________________________________
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix

Reply via email to