Hi Paul,
Will this work with the 1 and 2 GB models? Thanks, Howard paul- wrote: > I have published a new beta > image.....https://repo.picoreplayer.org/insitu/piCorePlayer6.0.0/piCorePlayer6.0.0-b4.zip > > See info in the > OP...https://forums.slimdevices.com/showthread.php?110727-BETA-piCorePlayer6-0-0-PI4-support&p=944664&viewfull=1#post944664 > > For only the pi4, I have built and included a 64bit kernel......the > userspace is still 32bit. The primary reason for this is the pi4 4GB > board *should* perform better in 64bit mode. To use the 64 bit kernel, > you will need to do a little manual editing...... > > > > - Burn Image to SD card - Edit config.txt to swap to 64 bit kernel - boot as normal. > > > > > The reason to do this on a base image, is that you will need the 64 > bit module extensions, which I only include a few critical ones on the > base image......once you are running the 64 bit kernel, swapping back > to 32 bit can be done, but if you added any kernel modules (Like > filesystems) in 64 bit mode, you will not have the correct extension > for 32 bit mode(armv7l) > > Here is the PI4 section from the config.txt and what you will need to > do to use the 64 bit kernel. Note that the fkms video driver is not > working in 64 bit mode, if you are running jivelite or some display, > there may be some video issues. Also, internal audio is not working > in 64 bit mode. > > Code: -------------------- > > > [PI4] > initramfs pcp_10.2v7l.gz followkernel > kernel kernel41973v7l.img > dtoverlay=vc4-fkms-v3d > max_framebuffers=2 > ### Previous 4 lines are for a 32bit kernel > ### Comment the previous 4 lines out and uncomment the next 3 for 64 bit kernel > #arm_64bit=1 > #initramfs pcp_10.2v8.gz followkernel > #kernel kernel41973v8.img > -------------------- > > > > I will make insitu_udpate available soon, but the main reason for this > beta release is the 64bit kernel which is much easier to start from a > fresh image. ------------------------------------------------------------------------ Howard Passman's Profile: http://forums.slimdevices.com/member.php?userid=16674 View this thread: http://forums.slimdevices.com/showthread.php?t=110727 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
