rgro wrote: > Do you think everything is o.k., now???
It looks good! rgro wrote: > I found that I could change and save the fan configuration values using > the WinSCP editor. I double clicked on the argononed.py file, opened > it, changed the fan and temp values, and saved. Is that an acceptable > way to experiment with different the different temperature triggers and > fan speeds?? Yes, that is OK. To test if the fan starts use a temperature below the actual Pi temperature and set the percent value to something higher than 0. You have to reboot after the change! If you hear the fan running after the reboot, you know that it works. Also you can press the power button for 3-4 seconds and the Pi should make a graceful shutdown. You will see that the red LED will switch off and then the Pi is switched off. Also you can double click the power button and then the Pi will make a reboot. The last thing you can make with the power button is to press ist for longer than 5-6 seconds, but you shouldn't really test it because this will make a hard switch off of the Pi. pi4 4gb picoreplayer with lms and squeezelite for usb inside an argon one case pi3b+ (7\" display, hifiberry dac+ pro) picoreplayer with squeezlite/jivelite for hifiberry and bluetooth headphone inside a smartipi touch case two airport express ikea symfonisk ------------------------------------------------------------------------ carsten_h's Profile: http://forums.slimdevices.com/member.php?userid=69113 View this thread: http://forums.slimdevices.com/showthread.php?t=113575 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
