ralphy wrote: > I'm using a justboom IR remote with pcp 7 64bit. > > To clear the keytable the command should be (sudo ir-keytable -p all -c) > typo? > > Then check the output from (sudo ir-keytable -t) again. > > Also check the IR values in pcp.cfg (grep ^IR > /usr/local/etc/pcp/pcp.cfg). I've seen the IR_GPIO_IN value reset to > default after reinstalling the ir extensions. I'm using the default > 25. > > > Code: -------------------- > > IR_LIRC="no" > IR_KEYTABLES="yes" > IR_GPIO_IN="25" > IR_GPIO_OUT="" > IR_DEVICE="lirc0" > IR_CONFIG="" -------------------- > > Yes it was a typo and is working perfectly now with pcp 7 32bit. I may try with pcp7 64bit if it is worth it with a 3B+. Thank you for the help, its nice to get the justboom remote going again. All the best diode84
------------------------------------------------------------------------ diode84's Profile: http://forums.slimdevices.com/member.php?userid=68983 View this thread: http://forums.slimdevices.com/showthread.php?t=113512 _______________________________________________ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix