paul- wrote:
> When you "down" a connection, we don't have a network daemon running to
> handle changing the default route to the other connection so that is why
> you loose connectivity.
>
> The interesting thing here is why when you only have the USB ethernet
> plugged in, why doesn't it work, when you are getting an address.
>
> I see this error in both pCP and Buster. We have not packaged any
> firmwares for this chipset, but if it works under buster with the same
> error, then the firmware may not be 100% needed for function. But we
> might want to rectify that.
> >
Code:
--------------------
> >
> [ 12.563876] r8152 1-1:1.0: Direct firmware load for
rtl_nic/rtl8153a-3.fw failed with error -2
> [ 12.563908] r8152 1-1:1.0: unable to load firmware patch
rtl_nic/rtl8153a-3.fw (-2)
>
--------------------
> >
Hey Paul, I have just made a fresh image of Buster-LIte and the same
lines are in that dmesg
36055
The usb-ethernet connector and wireless both work though, I added the
wireless after updating.
Code:
--------------------
pi@raspberrypi:~ $ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.101 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::1149:6f2a:7b33:6918 prefixlen 64 scopeid 0x20<link>
ether 00:e0:97:00:2f:08 txqueuelen 1000 (Ethernet)
RX packets 174 bytes 20844 (20.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 104 bytes 14952 (14.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.103 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::dd6e:4c61:37cf:d3eb prefixlen 64 scopeid 0x20<link>
ether e4:5f:01:3c:13:b7 txqueuelen 1000 (Ethernet)
RX packets 48 bytes 7746 (7.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 32 bytes 5989 (5.8 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
pi@raspberrypi:~ $ lsusb
Bus 001 Device 002: ID 0bda:8153 Realtek Semiconductor Corp. RTL8153 Gigabit
Ethernet Adapter
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
--------------------
Please don't spend too much of your time over this, I have a feeling
that when Bullseye arrives, a few of the present glitches will have been
addressed :rolleyes: and you'll have some new problems for pCP v 9.0.0
:):):p
ronnie
+-------------------------------------------------------------------+
|Filename: fail to load.png |
|Download: http://forums.slimdevices.com/attachment.php?attachmentid=36055|
+-------------------------------------------------------------------+
------------------------------------------------------------------------
Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627
View this thread: http://forums.slimdevices.com/showthread.php?t=115331
_______________________________________________
unix mailing list
unix@lists.slimdevices.com
http://lists.slimdevices.com/mailman/listinfo/unix
