Hi again,
I have finally recieved my new Powerlogix Powerforce G3/400 card
from OWC & have installed it this afternoon on the 7300 that was running X
fine before I installed.
I restarted the machine in 9.1, as suggested by Ryan Rempel,
installed the various software & extensions for it, tested that it was
working fine, loaded up XPostFacto 2.11, selected 'Reinstall Extensions' &
'Reinstall BootX' from within XPostFacto, then clicked on restart in
XPostFacto - however, the machine goes to restart, then just sits there
doing nothing.
If I reboot, insert a 9.1 CD, it loads up & I can select the 9.1
folder in Startup Disk, then it reboots fine. Doing the same, except
selecting the OSX folder, doesn't make any difference. Any ideas? Do I need
to do a fresh installation of OSX now that the G3 card is in to get it to
boot from OSX?
Any help greatfully appreciated.
Bye for now, Terry Allen
___________________________________________________________________
hEARd
Postal Address:
hEARd
c/o 128 The Entrance Rd
The Entrance
NSW 2261
Australia
Internet -
WWW:
http://heard.com.au or http://www.ozemail.com.au/~hmag
http://hosting.heard.com.au
Interactive Message Board - http://heard.com.au/wwwboard/
EMAIL: (checked every Thursday & Sunday, sometimes more often)
[EMAIL PROTECTED]
-----------------------------------------------
Non profit promotion for new music - since 1994
-----------------------------------------------
Also, check out the Educate site - http://www.educate.net.au
--
Unsupported OS X is sponsored by <http://lowendmac.com/>
Support Low End Mac <http://lowendmac.com/lists/support.html>
Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html>
Send list messages to: <mailto:[EMAIL PROTECTED]>
To unsubscribe, email: <mailto:[EMAIL PROTECTED]>
For digest mode, email: <mailto:[EMAIL PROTECTED]>
Subscription questions: <mailto:[EMAIL PROTECTED]>
Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/>
Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
