-- Unfortunatly there is no work around for this.. With any drive you intend to install Jag on the it must be broken down to contain atleast 2 partitions. The first is actually recommmend to be a bit smaller than 8gbs to account for the 1024k to each meg. However, two partitions shouldn't be to much of a hassle.
-- Nathan Templeton G3/300. 8600/300, 6400/180, misc hardware. PIII550, misc. OS 7.1-10.2.3, Win3.1-XP, SuSE, Mandrake, MKLinux, YDL, Slackware Hotel - Tango - Hotel on 2/10/04 6:15 PM, Gerald Wilson at [EMAIL PROTECTED] wrote: > > > Finally getting round to installing Jag onto a disk attached to a > Sonnet Tempo Trio, in a 9500 chassis. I'm a bit surprised that the > installer insists that the destination partition should lie within the > first 8 GB of my big ATA drive. > > Is that normal for this kind of configuration? I had been expecting > that this limitation was only for ATA drives directly attached to the > internal bus on things like beige G3s, but you guys might know > different. > > If there's a workaround to allow the machine to use the entire disk > unpartitioned, please tell me what it is. > > thnx > > Gerald WW > > -- Unsupported OS X is sponsored by <http://lowendmac.com/> Support Low End Mac <http://lowendmac.com/lists/support.html> Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
