I control my Sonnet G3 card with PowerLogix software - bear in mind my 9600 is now only running OS9. The powerlogix software allows you to "switch off" soldered mobo cache allowing Daughter Card L2 cache to function correctly. Later versions of the Sonnet software allowed soldered mobo cache to act as a L3 cache. Again this only applies to OS9 and as I now have G5 for X work I haven't pursued the "tuning" of sonnet card in 9600 under X since Panther.

For background to discussion mine is (was?) a 9600/233 single processor.

Mine also runs mobo at 46.6 as CPU is 303Mhz

D'oh!

 Luckily, your motherboard can go up to 50MHz with no problem as
that was the spec for all the MBoard components in the 7300-9600
PowerSurge series

Only if I have a CPU board with a variable clock speed setting right? I have a Sonnet - enough said?

(though some 256k L2 caches from the 120 MHz models can't do more
than 45 MHz, but they can be replaced).

Some 9600s with that defect have the L2 cache soldered to the board, and if you have a CPU that pushes the board up to 50MHz it just won't work right.

For a 233 MHz CPU, the supported bus multiplier was 5x: 233 � 5 = 46.7MHz.

Any idea what it is for a 200MHz? It might be that my board was at 50MHz but my G3/300 card dropped it to 46.7, dunno as my 9600 came stripped.

That explains it. I assumed you still had the original 604e chip in it- the only 604e chip that ran the bus at 46.7 MHz was the 233 MHz board. The 200 MHz 9600 ran at 50MHz.

The CPU daughtercard determines the bus speed in the 7300-9600
machines, so depending on the settings, it will be set to anything
from 40-50MHz (though the later PowerLogix and XLR8 G3 and G4 boards
gave you the option of going up to 62 MHz- some [very few] of these
machines *will* run at those speeds).  Sonnet is known for using
conservative bus speeds on their G3 upgrades as most companies' 300
MHz boards are set at 50 MHz (6 x 50).  Yours is apparently 46.67 x
6.5 = 303 MHz.  One of my users has one of those in a PowerCenter.

-- Unsupported OS X is sponsored by <http://lowendmac.com/>

Support Low End Mac <http://lowendmac.com/lists/support.html>

Unsupported OS X list info <http://lowendmac.com/lists/unsupported.html>
 --> AOL users, remove "mailto:";
Send list messages to:     <mailto:[EMAIL PROTECTED]>
To unsubscribe, email:     <mailto:[EMAIL PROTECTED]>
For digest mode, email:    <mailto:[EMAIL PROTECTED]>
Subscription questions:    <mailto:[EMAIL PROTECTED]>
Archive <http://www.mail-archive.com/unsupportedosx%40mail.maclaunch.com/>

Using a Mac? Free email & more at Applelinks! http://www.applelinks.com



Reply via email to