Now that Mike added the Analog Devices USB/JTAG solution (ADZS-ICE-100B), I have a few on my desk, if anyone wants to try them out. Just a private email with a shipping address is all that is needed...
http://www.analog.com/en/embedded-processing-dsp/blackfin/emulator-100/processors/product.html http://urjtag.git.sourceforge.net/git/gitweb.cgi?p=urjtag/urjtag;a=commitdiff;h=8892ca165deb95b7739a3050e2678474e7af8fdc The pinout is a 14-pin 0.1" - You might need to swizzle things to connect it to your specific JTAG target. pin pin GND 1 2 Emulation Output (No Connect, except on ADI Processors) Key 3 4 Ground VDD(I/O) 5 6 JTAG Mode Select (TMS) Ground 7 8 JTAG Clock (TCK) Ground 9 10 JTAG Reset (~TRST) Ground 11 12 JTAG Serial Data In (TDI) Ground 13 14 JTAG Serial Data Out (TDO) >From Figure 6 (page 10): http://www.analog.com/static/imported-files/application_notes/ee-68_rev10.pdf We have really only tested things with ADI processors - so people that want to bang on other things would really be appreciated. Our tests downloading code via gdbproxy on Blackfin have shown it to be as fast or faster than the FDTI solutions we use... Thanks -Robin ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ UrJTAG-development mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/urjtag-development
