Hi,
I need to program a MAXII CPLD under linux. This CPLD is connected directly
to my uP through gpio pins. The uP runs Linux.
While googling for a solution I bumped upon urljtag, which seemed a nice
starting point.
As I see it there is not yet generic gpio support, but I feel it should not
be overly difficult to add it (using bit banging).
My questions: is urjtag a good starting point. If so, should I consider my
direct connection to be a cable? And if so, what would be a good starting
point?
(actually to me ts7800 looks like an interesting starting point, although it
pokes directly in /dev/mem, whereas I probably would prefer to use the
standard gpio mechanism (see
http://www.mjmwired.net/kernel/Documentation/gpio.txt) )
Thanks alot! Frans
------------------------------------------------------------------------------
This SF.net email is sponsored by Sprint
What will you do first with EVO, the first 4G phone?
Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first
_______________________________________________
UrJTAG-development mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/urjtag-development
