2010/9/2 Mike Frysinger <[email protected]>: > On Thursday, September 02, 2010 10:30:51 Frans Meulenbroeks wrote: >> I noticed one thing, not related to my changes: >> there is no makefile dependency for the bison files. >> The patch updated the .y file but the .c file was not regenerated when >> doing a make. >> guess I had to d a make distclean or so, but expected it to work out of the >> box. > > yes, that is a known issue atm > -mike >
Mike have you tested svf after doing the patches? I tried git head earlier today. It seems to program the fpga (svf command takes about the time I expect it to take) but the device does not start although it is the same file I used before in my test (which did work then). The board is verifed to work (quartus programs the same design without problems). This happens both with usbblaster and a std ftdi2232 chip. host is intel pc with ubuntu 10.4 (64 bit). I will try to pinpoint the problem tomorrow at work. Could also be that something changed due to the move to libusb1. Frans ------------------------------------------------------------------------------ This SF.net Dev2Dev email is sponsored by: Show off your parallel programming skills. Enter the Intel(R) Threading Challenge 2010. http://p.sf.net/sfu/intel-thread-sfd _______________________________________________ UrJTAG-development mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/urjtag-development
