that was me...
On Tue, 9 May 2017, Walter F.J. Mueller wrote:
I saw a thread from September 2014 entitled
"Digilent Nexys-4 xilinx board FT2232".
Question was whether urjtag can be used to program the new
Digilent boards with a FTDI 2232 JTAG/UART interface.
I couldn't see a success story, but a message posted by
Steve Tell with a clear description of the board logic
(which is always hidden in the Digilent schematics).
Did somebody succeed to program a Nexys4, Basys3 or alike
with urjtag, and if yes, with which settings ?
I got a message off-list from someone who had used the pin description in
my message and patch to construct an openocd configuration that worked.
But I haven't heard of any success with those digilent boards and urjtag.
-Steve
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
UrJTAG-development mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/urjtag-development
