BAS Engineer will assist Project Manager and Siemens Building Automation
(Vendor) in replacing Barber-Coleman HVAC Controls
and alarming system with Siemens Insight Model PxCM BAS system. This is a
cGMP position in BioTech Pharmaceutical firm.
1. PURPOSE
1.1. The purpose of this document is to develop the requirements for
a Building Automation System (BAS) Project
Engineer to work on the PDU BAS Replacement Project for Bayer HealthCare in
Emeryville California.
2. Project Scope of Work
2.1. The existing Barber-Coleman HVAC Controls and alarming system
will be replaced with a Siemens Building
Technologies Insight Model PxCM BAS system.
2.2. The existing Paragon alarm monitoring system will be removed and
connected to the new Siemens system.
2.3. Existing differential pressure transmitters and obsolete current
to pneumatic (I/P) devices will be replaced.
2.4. Existing control panels will be demolished and new Siemens PxCM
panels will be installed.
2.5. A new server, printer and RENO dial out system will be networked
for access to data by production and
Facility Operations personnel.
2.6. Siemens Building Technologies engineers and technicians will
perform all hardware and software installations.
2.7. Construction activities will require installation of new
instruments, instrument calibration, commissioning
and a documentation package which will be turned over to the validation
group for I/O/Q.
2.8. The project is currently phasing into detail design and funding
approval is underway.
2.9. The BAS will be replaced during an annual ten (10) week
manufacturing / production shutdown beginning in
April 2009.
3. Experience and Skills Required
3.1. The BAS Project Engineer candidate should have a broad technical
understanding of cGMP requirements, facility
operation, building automation system, engineering turn over package
documentation and a general knowledge of the validation
process.
3.2. The selected candidate should demonstrate the ability to
communicate effectively both orally and in writing.
An understanding of timeline driven deliverables is also a requirement.
3.3. The ability to identify predecessor requirements and solve
problems must be coupled with a desire to work as
part of an integrated project team.
3.4. Proficiency with Microsoft Office and Microsoft Project software
is also required to perform this job
effectively.
3.5. The successful candidate must be able to:
3.5.1. Work under the supervision and guidance of the Project
Manager
3.5.2. Develop project schedules and project milestones
3.5.3. Oversee and coordinate the work of Siemens electrical and
mechanical sub-contractors.
3.5.4. Oversee and coordinate the work of calibration crew and
assure that documents are properly completed.
3.5.5. Attend or conduct weekly project and coordination
meetings. Perform duties of Project Manager during
absences.
3.5.6. Review Bayer HealthCare instrument, electrical and network
documents during detail design.
3.5.7. Review Siemens programming and construction efforts to
assure compliance with project requirements.
3.5.8. Review detail design documents to meet project objectives
and timelines.
3.5.9. Review commissioning and GMP execution documentation.
Generate engineering corrective action plans.
3.5.10. Identify risks and devise problem solving and risk
mitigation strategies as they arise during the
project time line.
3.6. The Project Engineer must begin work as soon as October, 2008
and complete all work by June, 2009. This
includes commissioning, start up, validation support, engineering turn over
package development that will allow a release to
production no later than June, 2009.
3.7. The candidate must have a laptop with adequate software to meet
job scope description.
3.8. The Project Engineer will report to the PDU BAS Project Manager.
--
Thanks and Regards
Prabhu Kamble
Levanture Inc,
46090 Lake Center Plaza, Suite # 302, Sterling, VA 20165.
Direct: 703-574-3834 ,703-880-8499, 703-574-2916, Fax: 703-421-7775
[EMAIL PROTECTED] | www.levanture.com
Note: We respect your Online Privacy. This is not an unsolicited mail. Under
Bills .1618 Title III passed by the 105th U.S. Congress this mail cannot be
considered Spam as long as we include Contact information and a method to be
removed from our mailing list. If you are not interested in receiving our
e-mails, then please follow this link REMOVE. Sorry for any inconvenience
caused.
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"US_IT.Groups" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at
http://groups.google.co.in/group/us_itgroups?hl=en
-~----------~----~----~----~------~----~------~--~---
