Hi Mahesh,
I don't see any "Could not XXX" messages, so then the XHCI part should
be fine, and if you verify using Beagle, I expect there to be no more
data toggle mismatches, but I may be wrong.
--HPS
On 4/20/22 19:48, Mahesh Vardhamanaiah wrote:
Please find the few of the debug logs added in around the time problem is seen.
Tue Apr 19 23:37status = 0x6, xhci_configure_reset_endpoint() called epno = 3,
ep state = 3, drop = 0
xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 1 status
= 0x6, xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 0
xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 1
FreeBSD/arm (Amnesiac) (ttyu0)
login: err = 0x12
xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 0
xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 1 err =
0x12 xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 0
xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 1 err =
0x12 xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 0
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 d7 79 a8 00 00 80 00
(da0:umass-sim0:0:0:0): CAM status: CCB request completed with an error
(da0:umass-sim0:0:0:0): Retrying command, 3 more tries remain
xhci_configure_reset_endpoint() called epno = 2, ep state = 3, drop = 1
xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 1 status
= 0x6, xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 0
xhci_configure_reset_endpoint() called epno = 3, ep state = 3, drop = 1
