Sarah wrote: > I have a problem with printing the bottom portion of a card. It prints > the correct bit of the card but I can't get it to start at the top left > of the paper, it always prints down the page as if leaving room for the > non-printed section of the card. > > Here is my setup: > > The card is 723 pixels wide x 560 high. > The page setup is for A4 paper in landscape mode. > This gives a printPaperSize of 841,595 (with the default printMargins) > > I want to print the card from 4,157 to 719,554. > Here is the command I am using: > print this card from 4,157 to 719,554 into 72,72,697,451 > > Surely this should make the printout start 1 inch from the top and 1 > inch from the left of the paper. It looks like it starts 1 inch from > the left but about 3 inches from the top. > > If anyone has any suggestions I would be most grateful. I use Mac OS X > 10.2.2, Rev 1.1.1
You may need to adjust the printmargins global property. -- Richard Gaskin Fourth World Media Corporation Developer of WebMerge 2.1: Publish any database on any site ___________________________________________________________ [EMAIL PROTECTED] http://www.FourthWorld.com Tel: 323-225-3717 AIM: FourthWorldInc _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution