Thanks for your help, folks. The picture was too big. Thanks also Graham for your email. Is there an advantage in other development areas for increasing memory to a very large number? Jim
on 12/21/03 1:05 AM, Ken Ray wrote: >> I tried Importing As Control into the card. Then I tried creating an Image >> object and Importing as Control into that but it didn't seem to work. I >> first tried to import a pict. Rev told me that the pict format was not >> x-platform and to try a png. So I did that with no luck, then I tried to >> Import As Control with a jpeg. Still no luck... Jim > > Jim, what size is the picture you're trying to import? If it is too big, > perhaps there's not enough memory to display it. > > Also, what version of Rev are you using? > > You could also try the "New Referenced Control" choice, select Image and > then pick your graphic. It should come in and display, and not even have any > handles on it until you click it. If you don't get an image this way > *either*, you can open the message box and type: > > put the fileName of last img > > and you should get a path... Verify that the graphic is at that path... > > ... and then let us know... > > > Ken Ray > Sons of Thunder Software > Web site: http://www.sonsothunder.com/ > Email: [EMAIL PROTECTED] > > _______________________________________________ > use-revolution mailing list > [EMAIL PROTECTED] > http://lists.runrev.com/mailman/listinfo/use-revolution -- OYF is... Highly resourceful people working together. <http://www.OwnYourFuture-net.com> Own Your Future Consulting Services Limited, 1959 Upper Water Street, Suite 407, Halifax, Nova Scotia. B3J 3N2 Info Line: 902-823-2477, Phone: 902-823-2339. Fax: 902-823-2139 _______________________________________________ use-revolution mailing list [EMAIL PROTECTED] http://lists.runrev.com/mailman/listinfo/use-revolution
