We can offer subject to prior sale or withdrawal the following hot oil tenter frames:
KRANTZ TENTER RANGE MODEL K10, 132" WIDE, 7-ZONE PIN FRAME, VERTICAL CHAIN, OVER/UNDER, DYE BEAM LET-OFF IN BACK, ENTERING INTO A WERNER PADDER DOUBLE EDGE SYSTEM TO BRING THE EDGES OF THE MATERIAL OUT BY TANDEMATIC, GOODS THEN LEAVE THE PADDER AND GO INTO ANOTHER SET OF TANDEMATIC PLATES. OPERATORS CONTROL, EACH OF THE 7 ZONES HAS A HONEYWELL CONTROL, 2-ROLL R/R PADDER WITH SET OF TANDEMATIC FLAT PLATE GUIDERS PADDER IS 138" FACE R/R PNEUMATIC, 3 ENTRY S/S ROLLS IN FRONT, DIP PAN, PADDER IS 2 RUBBER ROLLS ONE BLACK ONE LIGHTER COLOR APPROX. 20" DIA., 2 SMALLER 8" DIA. ROLLS FOR PRESSURE SQUEEZES, PAIR E & L ELEPHANT EAR TYPE VACUUM GUIDERS ON ENTRY, GOODS TRAVEL UNDER PLATFORM THROUGH PAIR OF E & L FLAT PLATE GUIDERS AND INTO THE TENTER, KRANTZ 7-ZONE 2 ENTRY SCROLL ROLLS ON OVERFEED WITH TANDEMATIC GUIDING, ENTRY HAS MAHLO PERMASET CONTROL PANEL MODEL VAT92B, S/N 3691/12-7/443, YEAR 1994, TENTER HAS E & L ENTRY GUIDERS MODEL FR1501 WITH TANDEMATIC PLATES, MOTORIZED PINNING BRUSHES, ON FRAME OILING, CENTER OF FRAME HAS LIFTING DEVICE TO HOLD THE CENTER OF THE FABRIC UP, FULL OPERATORS CONTROLS INCLUDING 3 TV SCREENS AND FULL OPERATION OF THE FRAME FROM BOTH ENDS, OPERATORS PANEL ALSO HAS 7 HONEYWELL CONTROLS FOR THE OPREATION OF THE INDIVIDUAL ZONES, THERE IS AN 8TH ZONE WHICH IS SET UP FOR THE COOLING ZONE, KRANTZ LOOP CONTROL ADJUSTABLE FROM FRONT, ENTRY END 20', HOUSING LOW PROFIL WITH 3 ROOF EXHAUSTS, TENTER HOUSING 75' LONG, 2 - 5' COOLING SECTIONS AT EXIT END, EXIT END RAIL IS 12', EXIT END HAS EDGE TRIMMING ON FRAME, GOODS THEN TRAVEL TO THE OPTION OF AN EXIT END A-FRAME BATCHER KRANTZ DOUBLE SIDED, EXIT ARM ALSO CONTAINS TANDEMATIC GUIDERS, 4 INDIVIDUAL CAMERA SECTIONS AT EXIT, KRANTZ BATCHER AT EXIT IS A MODEL SAT S/N 8085 ARTOS TENTER FRAME, FRAME CONSISTS OF 1 ADJUSTABLE BEAM UNWINDER, WITH SILK CITY OR KRANTZ STYLE UNWINDER, 130" 2-ROLL PNEUMATIC SCRAY W/SOLID S/S BED, GOODS PASS FROM THE SCRAY TO A SET OF E & L GUIDERS ELEPHANT EARS AND TANDEMATIC EYES ONTO A 2 ROLL R/R PADDER - PADDER HAS 3 ENTRY S/S ROLLS SINGLE DIP PAN, PADDER 138" FACE 2 20" ROLLS VERTICAL 2 - 8 - 10" ROLLS CENTERED BETWEEN THEM HORIZONTAL, TENTER FRAME ITSELF IS A HORIZONTAL FRAME ARTOS UNIT UPDATED IT HAS A 130" CAPACITY HORIZONTAL PINS, ENTRY HAS E & L FR1501 ELECTRIC GUIDING WITH TANDEMATIC PLATE, ELECTRIC PINNING BRUSHES, ON FRAME OILING OPERATORS PANEL HAS CONTROLS FOR THE 9 ZONES PLUS THE ONE SPARE COOLING ZONE RUN BY HONEYWELL CONTROLS, UNIT HAS COMPLETE COUNTING FOR PICK AND COARSE COUNTER, 12' ENTRY, HOUSING IS 100' LONG, 5' COOLING SECTION AT EXIT END, ON FRAME TRIMMING AND CUTTING, 10' EXIT, DOUBLE TV SCREEN AT EXIT WITH PICK COARSE COUNTER, GOODS GO TO A SILK CITY DOUBLE A-FRAME WINDER, MODEL SAT S/N 8181 FIRST THERMAL SYSTEMS, HOT OIL BOILER FOR TENTER FRAME, BUILT 1986, MODEL 800-6HC-LT-GP-GOL-IRI, DESIGN FOR 16,0000,000 BTUS, HEATING SURFACE 1278 SQ. FT., NATURAL GAS, #2 OIL, FLUID IS DOWNTHERM HT, WITH A MIN. FLOW RATE OF 1,100 GALLONS PER MINUTE, SAFETY SETTING 150 PSI, OPERATING TEMP. 650 DEG. F., GROSS INPUT PER HOUR IS 22,871,354 PLEASE REPLY TO THIS EMAIL AT : [email protected] <mailto:[email protected]> Authentic message from United Textile Machinery Corp. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or taking of any action in reliance on the information contained in this e-mail is prohibited. If you have received this email in error, please immediately notify your email administrator United Textile Machinery Corporation 16 Anawan Street, 2nd Floor, Fall River, MA 02721 Telephone: 508-676-8247, Fax:508-677-4717 Email: [email protected] www.unitedtextile.com <http://www.unitedtextile.com/> --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Used Textile" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/usedtextile -~----------~----~----~----~------~----~------~--~---
