We can offer to you subject to prior sale or withdrawal the following Inspection Machines & Lines: STOCK #C-8819 MEASUREGRAPH / E & L INSPECTION LINE SYSTEM, 84", 12/230/480 VOLT, MODEL 575-84, MEASUREGRAPH INSPECTION MACHINE WITH MOTOR 2 HP, 120 VOLT SINGLE PHASE ELCTRICS, PNEUMATIC FOOT TRIP DEVICE, YARDAGE COUNTERS, AIR BAR ON FRONT 3" DIA. X 80", LOWER FRAME LETOFF, ELECTRIC EYES, E&L AUTOMATIC KAMBER TYPE GUIDING SYSTEM (ON SEPARATE FRAME) WTIH INDIVIDUALLY DRIVEN (MENZEL) 84" METAL EXPANDER ROLL, PAIR OF MOTORIZED 2-FINGER GUIDERS EACH WTIH SINGLE KNIFE EDGE TRIMMER, ILLUMINATION LIGHTS, LARGE LOT OF CONTROLS, 480 VOLT ELECTRICS, PORTION OF FRAME WTIH ROLL THAT MOVES APPROX. 4"-5" SIDE-TO-SIDE AS NEEDED, 3 PULL ROLLS ON TOP, ROTRON VACUUM EDGE WASTE COLLECTION SYSTEM WITH BLOWER, DIRECT-CONNECTED TOTALLY ENCLOSED FAN COOLED MOTOR 7 1/2 HP, 3460 RPM, 230/460 VOLT, 2 STOP START CONTROLS, STAINLESS STEEL FLEX HOSING, FILTER FOR MOTOR AND BLOWER, STEEL PLATE CABINET ENCLOSRUE 4' X 4' X 4' HEIGHT WITH 2 TOP-MOUNTED FILTERS EACH 2' X 4'. STOCK #C-8927 MEASUREGRAPH INSPECTION MACHINE, MODEL 575-60, 60" WORKING WIDTH, 110 VOLT, MOTOR 1/2 HP, SINGLE PHASE ELECTRICS ORIGINAL ANALOG COUNTER, PLUS NEWER DURANT DIGITAL COUNTER, FOOT TRIP DEVICE, NO INPSECIOTN BOARD OR LIGHT STOCK #C-8928 MEASUREGRAPH INSPECTION MACHINE, 82", 115 VOLT, MILL-ALTERED, DISASSEMBLED, MARATHON MOTOR 1 HP, 1725 RPM, SINGLE PHASE ELECTRICS, ANALOG COUNTER, WITH DOUBLE AND FOLD ATTACHEMENT AND MISCELLANEOUS PARTS, NO INPSECITON BOARD OR LIGHT STOCK #C-8966 CRA INPSECTION MACHINE, MODEL MB MEASUREMATIC, 128" CAPACITY, 110 VOLT, HAS DOUBLE AND FOLD ATTACHMENT UP TO 60" BACKLIGHTED BOARD, SINGLE HPASE ELECTRICS, MOTOR APPROX. 3/4 TO 1 HP, SIZE IS THE ROLL FACE WIDTH STOCK #C-8970 MEASUREGRAPH INSPECTION MACHINE, 72", 110 VOLT, WITH INSPECTION BOARD, MOTOR ESTIMATED 1/2 TO 1 HP STOCK #C-2175 SILK CITY INSPECTION MACHINE, 153" CAPACITY, 180/240 VOLT, 153" FRONT CARRY ROLL, TOP AND BOTTOM BAR LET OFF, LOOP CONTROL, A-FRAME TAKE UP BACK BAR TAKE UP, 140" BACK LIT BOARD WITH TRUMETER COUNTER NO COVER, LOOP CONTROL FRONT TENSION FORWARD AND REVERSING, TWIN DC DRIVES EACH 2 HP, 2400 RPM, MOTORS 180 VOLTS BUT HAVE 240 VOLT CONTROLS STOCK #C-6203 INSEPCTION MACHINE, 84" CAPACITY, PAPER/CLOTH, BACK LIGHT, FIFE HYDRAULIC EDGE GUIDER STYSTEM, TRUMETER ANALOG YARDAGE COUNTER WITH 1/8 YARD GRADUATIONS, LOW HP DC MOTOR IN BASE WITH PACEMASTER II DC VARISPEED DRIVE AND TORQUE CONTROL, FORWARD AND REVERSE FEATURE (2) ROLL SURFACE BATCHER / ROLL UP 90" WIDE STOCK #C-6560 BIRCH BROS. INSPECTION MACHINE, MODEL ROLL TO ROLL, 120" CAPACITY, 240 VOLT, PROGRAMMABLE BOW ROLL PRIOR TO ENTERING INSEPCTION BOARD, INSPECTION BOARD 123" FACE IN / FACE OUT FEATURE, REVERSE, FIFE GUIDER SYSTEM, WITH PNEUMATIC CHUCK CLOSER AND PNEUMATIC SQUARE BAR LET OFF ON REAR UNWIND AND TABLE AIR BRAKES, FRONT AIR BAR 2" DIA. (2) DURANT DIGITAL YARDAGE READOUTS, 140" WIDE 2-ROLL SURFACE BATCHER AT FRONT, PEDESTAL OPERATORS CONTROL PANEL, 30 AMP STOCK #C-6561 SILK CITY INSPECTION MACHINE, MODEL ROLL TO ROLL, 60" CAPACITY, 120/240 VOLT, ROLL TO ROLL FACE IN & FACE OUT FEATURE, FORWARD & REVERSE FEATURE, CONTINENTAL HYDRAULICS PNEU. SYS. FOR AIR FRONT BAR & SQUARE AIR BAR LET OFF AT READ, DRIVEN SQUARE BAR LETOFF AT REAR WITH 72" BACK ROLL & PNEU. ADJ. 64" FRONT AIR BAR TAKE UP, STOP-START CONTROL, AIR BRAKE, HIGH OR LOW SPEEDS, GUIDING SY. 72" WIDE INSPECTION BOARD, DIGITAL YARDAGE COUNTERS, CONTROLS, GEARED VARISPEED, DRIVE UNIT IN BASE STOCK #C-6562 ROLL TO ROLL, FACE IN & FACE OUT FEATURE, FORWARD & REVERSE, PNEU. SYSTEM FOR AIR FRONT BAR & SQUARE AIR BAR LET OFF AT REAR, DRIVEN SQUARE BAR LET OFF AT REAR W/ 72" WIDE BACK ROLL & PNEU. ADJ., 64" FRONT AIR BAR TAKE UP, STOP-START CONTROL, AIR BRAKE, HIGH OR LOW SPEEDS, HYDRALIGN GUIDING SYS., MDL. 5C 609, 72" WID INSPECTION BOARD, 2-DIGITAL YARDAGE COUNTERS, CONTROLS, GEARED VARISPEED DRIVE UNIT IN BASE STOCK #C-7597 KRANTZ INSPECTION MACHINE, 150" CAPACITY, 180/200/220/440 VOLT, BACKBOARD LIGHT, W/ MOTORIZED TOP PULL ROLL, STATIC BAR, AUTO. LETOFF & 2-ROLL SLITTER/ TAKEUP W/ DAYTON GEAR MOTOR DRIVE, 1 HP/ 1725 RPM - 1425 RPM / 220440 VOLT / 50-60 HZ, WEBSTER PNEUMATIC POWER UNIT 1/2 HP, 1725 RPM, 115/230 VOLT, MAIN DRIVE DC MOTOR 1 HP, 1750 RPM, 180-200 VOLT, 9.5 AMPS, MECHANICAL YARDAGE COUNTER STOCK #C-8038 MEASUREGRAPH INSPECTION MACHINE, 54" CAPACITY, OLDER STYLE STOCK #C-8688 MEASUREGRAPH INSPECTION MACHINE, 120" CAPACITY, MODEL 575-120, 220 VOLT, BACKLIGHTED, MOTOR 2 HP, YARDAGE COUNTER, FORWARD AND REVERSE FOR LOWER AND UPPER HEADS PICTURES AND PRICES ARE AVAILABLE ON ALL ITEMS PLEASE REQUEST.
PLEASE REPLY TO THIS EMAIL AT : [email protected] <mailto:[email protected]> Authentic message from United Textile Machinery Corp. This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or taking of any action in reliance on the information contained in this e-mail is prohibited. If you have received this email in error, please immediately notify your email administrator United Textile Machinery Corporation 16 Anawan Street, 2nd Floor, Fall River, MA 02721 Telephone: 508-676-8247, Fax:508-677-4717 Email: [email protected] www.unitedtextile.com <http://www.unitedtextile.com/> -- You received this message because you are subscribed to the Google Groups "Used Textile" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/usedtextile
