To:Used Textile Machines Group
Dear Sirs, We can offer for quick sale on exclusive base the following equipment, subject to prior sale, E. & O. E.: Code: 303-0144 1 x Platt Longclose Piece Dyeing Machine YOC: 1987 EL: 380/3/50 Jet dyeing machine. Single-tube, capacity 25 kgs, with Texpro ADC1001 controller from 1995, 4.5 bar, max temp 155 deg C Price: Euro 8 000, CFR Major Seaports New price: Euro 2 000, FCA Norrköping, Sweden, NET Investkonsult Pictures & video: www.ik.se/pictures/303-0144 Code: 303-0154 1 x Alliance Piece Dyeing Machine Type: Colora HT10 YOC: 1999 EL: 380/3/50 Sample dyeing machine, 215 liters, 140 deg. C., 3.3 bar, capacity 4-10 kgs, approximately 25 meters of fabrics. Price: Euro 18 000, CFR Major Seaports New price: Euro 6 000, FCA Norrköping, Sweden, NET Investkonsult Pictures: www.ik.se/pictures/303-0154 Code: 303-0164 1 x Thies Piece Dyeing Machine Type: Eco Soft Plus YOC: 1997 EL: 400/3/50 1 feeder 800 mm for batches of 250 kgs, Variodüse, including 2 colour mixing units with stirrers Price: Euro 39 000, FCA Finland, NET Investkonsult Pictures & drawings: www.ik.se/pictures/303-0164 Code: 303-0176 1 x Vald Henriksen Piece Dyeing Machine Type: VH 800/1000/1200 YOC: 1960-1976 EL: 380/3/50 In excellent condition all upgraded with new centralized I&C automatic system type Uni-T Technic UTT-1387. Each machine has its own electrical control panel. Following are the different models: 6 x VH 800/1600 2 x VH 800/1800 Price: Euro 25 000, FCA Mosjøen, Norway, NET Investkonsult Pictures: www.ik.se/pictures/303-0176 Code: 305-0042 1 x Krantz Padder Width: 2200mm YOC: 1972 EL: 380/3/50 2-cylinder padder with trough. Rubber cylinders dia 350 mm. Motor max 7kW. Excellent condition Price: Euro 8 000, CFR Major Seaports, NET Investkonsult New price: Euro 1 500, FCA Norrköping, Sweden, NET Investkonsult Pictures: www.ik.se/pictures/305-0042 Code: 322-0006 1 x Fleissner Drum Dryer Width: 1800mm YOC: 1980 EL: 380/3/50 4 perforated drums - dia 1412 mm, cooling zone, max temp 250 deg C., speed 6-60 m/min, 2 gas burners 600 kw/each, fully complete including panel. Can handle both fiber flakes as well as fabrics. Was used as lab-dryer in Fleissner's own lab - so very few production hours. Condition is very good. Price: Euro 48 000, FCA Germany, NET Investkonsult New price: Euro 35 000, FCA Germany, NET Investkonsult Pictures & drawing: www.ik.se/pictures/322-0006 Code: 326-0011 1 x Triveneta Grandi Impianti Tumbler Type: T/100 N.V. YOC: 2005 EL: 380/3/50 Capacity 40 meters fabric - approximately 20 kgs, 1000 mm diameter and 1200 mm depth, microprocessor LCD video with 100 programs, modem and drum separator, steam injection heating + inverter drive for the regulation of the drum revolution makes it possible to achieve a polar fleece effect on the fabric. Can be used for terry, knitted velour, hosiery and for thermal shrinkage of microfibre garments like stockings and socks. Price: Euro 15 500, CFR Major Seaports, NET Investkonsult Pictures: www.ik.se/pictures/326-0011 Code: 329-0008 1 x Monforts Dryer (Other) Type: Thermex-K Width: 1800mm YOC: 1996 EL: 380/3/50 Curing unit with 2 chambers complete with inlet and J-box, exit with 2 cooling cylinders (max width 1600 mm) and accumulator system take up in both plaiting/batching. Content in each chamber 90 meters. Price: Euro 75 000, CFR Major Seaports, NET Investkonsult Pictures, brochure & drawing: www.ik.se/pictures/329-0008 Code: 330-0042 1 x Benninger Open Width Washing Range Type: Extracta Width: 1900mm YOC: 1980 EL: 380/3/50 Complete scouring range with caustic impregnation at entrance for washing off bleach or caustic soda, mainly consisting of 3 washing compartments, 1 steaming compartment and finally 3 washing compartments exit in j-box with take up on A-frames. Speed 90 met/min. Compartments have an approximate content of: 20+15 Meters and a squeezer of 2 Tons, compartment of 15 Meters and direct into steamer which has 50 meters, after steamer again 20+15 meters with a squeezer of 2 tons and finally 15 meters with a squeezer of 2 tons. Inlet from A-frame to J-box, wetting, air suction of over saturation, Caustic soda impregnation tank, air custion of oversaturation, 10 cylinder stack dryer, continuous to first wash box. The I&C programme is installed 1995 and built by Uni-T Technik, Denmark. Heated water process is also built so that it can re-regenerate up to 70% of heat. Line comes complete with mixing and storage tanks as well as pumps and motors. Price: Euro 40 000, FCA Mosjøen, Norway, NET Investkonsult Pictures: www.ik.se/pictures/330-0042 Code: 330-0043 1 x Benninger Open Width Washing Range Type: Extracta Width: 1900mm YOC: 1980 EL: 380/3/50 After dye washing range consisting of inlet frame with EL kf 1020, j-box and 3 wash compartments each one with squeezer for 2 Tons. Content 45 meters. Standard electrical functions from Reliance. Exit in A-frames. Price: Euro 20 000, FCA Mosjøen, Norway, NET Investkonsult Pictures: www.ik.se/pictures/330-0043 Code: 369-0006 1 x Monforts Wet Processing Machine (other) Type: Tedeco system Width: 1600mm YOC: 1969 EL: 380/3/50 Open width ammoniac treatment plant (NH3) based on Tedeco system with Montforts equipment consisting of 2 section treatment chamber where 1st section is impregnating and 2nd chamber is regenerating Ammoniac back to gas form. Regenerating up to 97% is possible. Material then goes into drying section, cooling, stentering fixation and felt calander. Take up in plaiting. Line is modernized and has 2 Servomax Oxygen sensing units installed 2002. It also includes regenerating system with Sulzer compressor. 25 kbm SS tank can be offered separate. Can impregnate upto 700 gr/sqm. Price: Euro 60 000, CFR Major Seaports, NET Investkonsult Pictures: www.ik.se/pictures/369-0006 Code: 367-0002 1 x Olbrich/Trockentechnik Coating Range Width: 1800mm YOC: 1977-1996 EL: 380/3/50 A very versatile and complete coating line for application of various coatings consisting of 2 lines each with 2 coating heads built together so it is possible to make 4 separate coatings. The line is fully modernized with new I&C controls from Uni-T Technik 2002 and includes all accessories for mixing of different applications. The 2 lines consist of the following: Separate mixing room with scales, storage racks and 3 stirrers in connection to the lines. First line is Olbrich which has 2 coating heads and after each head a drying section covering 2 separate heat setting chambers. Products which only need 2 applications can be taken out after the first stage in big batch rolls. Second line is Trockentechnik Hornberg and also has 2 coating heads and after each head is a drying section each with 3 individual heatsetting zones. Before exit on this line there is also a type of embossing calander and a water cylinder cooling section before exit in big batch rolls. Heating media for dryers is steam. The complete line also has a surveillance system with cameras and monitors for rational production with few operators. Measurements for the total line are 45 x 6 x 6 meters (LxWxH). Average speed 12 - 15 m/min. For finishing process after coating and drying the line also has following calander: 1 x Küsters Calender Type: 213.50-2000 Width: 2000mm YOC: 1979 EL: 380/3/50 Inlet with clothguiders and metal detector, 3 rollers with racolan/steel/racolan, gasheated, exit in big batch rolls, max pressure is: 2 x 275 N/cm Price: Euro 300 000, CFR Major Seaports, NET Investkonsult Pictures: www.ik.se/pictures/367-0002 Code: 940-0020 1 x Wieslock Thermal Oil Boiler Type: S/H 232-25 YOC: 1987 EL: 380/3/50 Thermal oil boiler for serving 2 stenters with following characteristics: Weishaupt burner type MS9Z version D, 10 bar, max 300 degrees, 2 200 liters, 2 236 kW, volume flow is 165qbm/hr and max is 200 liter/hr. Price: Euro 15 000, CFR Major Seaports, NET Investkonsult Pictures: www.ik.se/pictures/940-0020 We hope that you will find this offer of interest, and if you have any further questions, etc, please don't hesitate to contact us, we will always be at your best services. Best regards, Lars, Johan & Anders Berlin Investkonsult Sweden AB www.ik.se -- You received this message because you are subscribed to the Google Groups "Used Textile" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/usedtextile
