... use all tty_port helpers
Signed-off-by: Richard Weinberger <rich...@nod.at>
---
arch/um/drivers/line.c | 102 +++++++++++++++++----------------------
arch/um/drivers/line.h | 6 ++-
arch/um/drivers/ssl.c | 15 ++----
arch/um/drivers/stdio_console.c | 20 ++++----
4 files changed, 65 insertions(+), 78 deletions(-)
diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c
index 131129a..95d5e78 100644
--- a/arch/um/drivers/line.c
+++ b/arch/um/drivers/line.c
@@ -296,43 +296,14 @@ int line_setup_irq(int fd, int input, int output, struct
line *line, void *data)
return err;
}
-/*
- * Normally, a driver like this can rely mostly on the tty layer
- * locking, particularly when it comes to the driver structure.
- * However, in this case, mconsole requests can come in "from the
- * side", and race with opens and closes.
- *
- * mconsole config requests will want to be sure the device isn't in
- * use, and get_config, open, and close will want a stable
- * configuration. The checking and modification of the configuration
- * is done under a spinlock. Checking whether the device is in use is
- * line->tty->count > 1, also under the spinlock.
- *
- * line->count serves to decide whether the device should be enabled or
- * disabled on the host. If it's equal to 0, then we are doing the
- * first open or last close. Otherwise, open and close just return.
- */
-
-int line_open(struct line *lines, struct tty_struct *tty)
+static int line_activate(struct tty_port *port, struct tty_struct *tty)
{
- struct line *line = &lines[tty->index];
- int err = -ENODEV;
-
- mutex_lock(&line->count_lock);
- if (!line->valid)
- goto out_unlock;
-
- err = 0;
- if (line->port.count++)
- goto out_unlock;
-
- BUG_ON(tty->driver_data);
- tty->driver_data = line;
- tty_port_tty_set(&line->port, tty);
+ int ret;
+ struct line *line = tty->driver_data;
- err = enable_chan(line);
- if (err) /* line_close() will be called by our caller */
- goto out_unlock;
+ ret = enable_chan(line);
+ if (ret)
+ return ret;
if (!line->sigio) {
chan_enable_winch(line->chan_out, tty);
@@ -340,44 +311,60 @@ int line_open(struct line *lines, struct tty_struct *tty)
}
chan_window_size(line, &tty->winsize.ws_row,
- &tty->winsize.ws_col);
-out_unlock:
- mutex_unlock(&line->count_lock);
- return err;
+ &tty->winsize.ws_col);
+
+ return 0;
}
-static void unregister_winch(struct tty_struct *tty);
+static const struct tty_port_operations line_port_ops = {
+ .activate = line_activate,
+};
-void line_close(struct tty_struct *tty, struct file * filp)
+int line_open(struct tty_struct *tty, struct file *filp)
{
struct line *line = tty->driver_data;
- /*
- * If line_open fails (and tty->driver_data is never set),
- * tty_open will call line_close. So just return in this case.
- */
- if (line == NULL)
- return;
+ return tty_port_open(&line->port, tty, filp);
+}
- /* We ignore the error anyway! */
- flush_buffer(line);
+int line_install(struct tty_driver *driver, struct tty_struct *tty,
+ struct line *line)
+{
+ int ret;
- mutex_lock(&line->count_lock);
- BUG_ON(!line->valid);
+ ret = tty_standard_install(driver, tty);
+ if (ret)
+ return ret;
+
+ tty->driver_data = line;
- if (--line->port.count)
- goto out_unlock;
+ return 0;
+}
+
+static void unregister_winch(struct tty_struct *tty);
- tty_port_tty_set(&line->port, NULL);
- tty->driver_data = NULL;
+void line_cleanup(struct tty_struct *tty)
+{
+ struct line *line = tty->driver_data;
if (line->sigio) {
unregister_winch(tty);
line->sigio = 0;
}
+}
-out_unlock:
- mutex_unlock(&line->count_lock);
+void line_close(struct tty_struct *tty, struct file * filp)
+{
+ struct line *line = tty->driver_data;
+
+ tty_port_close(&line->port, tty, filp);
+}
+
+void line_hangup(struct tty_struct *tty)
+{
+ struct line *line = tty->driver_data;
+
+ tty_port_hangup(&line->port);
}
void close_lines(struct line *lines, int nlines)
@@ -589,6 +576,7 @@ int register_lines(struct line_driver *line_driver,
for (i = 0; i < nlines; i++) {
tty_port_init(&lines[i].port);
+ lines[i].port.ops = &line_port_ops;
spin_lock_init(&lines[i].lock);
mutex_init(&lines[i].count_lock);
lines[i].driver = line_driver;
diff --git a/arch/um/drivers/line.h b/arch/um/drivers/line.h
index 6c3b252..ad00f3e 100644
--- a/arch/um/drivers/line.h
+++ b/arch/um/drivers/line.h
@@ -58,7 +58,11 @@ struct line {
};
extern void line_close(struct tty_struct *tty, struct file * filp);
-extern int line_open(struct line *lines, struct tty_struct *tty);
+extern int line_open(struct tty_struct *tty, struct file *filp);
+extern int line_install(struct tty_driver *driver, struct tty_struct *tty,
+ struct line *line);
+extern void line_cleanup(struct tty_struct *tty);
+extern void line_hangup(struct tty_struct *tty);
extern int line_setup(char **conf, unsigned nlines, char **def,
char *init, char *name);
extern int line_write(struct tty_struct *tty, const unsigned char *buf,
diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c
index cba95d9..7e86f00 100644
--- a/arch/um/drivers/ssl.c
+++ b/arch/um/drivers/ssl.c
@@ -87,19 +87,13 @@ static int ssl_remove(int n, char **error_out)
error_out);
}
-static int ssl_open(struct tty_struct *tty, struct file *filp)
+static int ssl_install(struct tty_driver *driver, struct tty_struct *tty)
{
- int err = line_open(serial_lines, tty);
-
- if (err)
- printk(KERN_ERR "Failed to open serial line %d, err = %d\n",
- tty->index, err);
-
- return err;
+ return line_install(driver, tty, &serial_lines[tty->index]);
}
static const struct tty_operations ssl_ops = {
- .open = ssl_open,
+ .open = line_open,
.close = line_close,
.write = line_write,
.put_char = line_put_char,
@@ -110,6 +104,9 @@ static const struct tty_operations ssl_ops = {
.set_termios = line_set_termios,
.throttle = line_throttle,
.unthrottle = line_unthrottle,
+ .install = ssl_install,
+ .cleanup = line_cleanup,
+ .hangup = line_hangup,
};
/* Changed by ssl_init and referenced by ssl_exit, which are both serialized
diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c
index 5cefdba..929b99a 100644
--- a/arch/um/drivers/stdio_console.c
+++ b/arch/um/drivers/stdio_console.c
@@ -89,21 +89,17 @@ static int con_remove(int n, char **error_out)
return line_remove(vts, ARRAY_SIZE(vts), n, error_out);
}
-static int con_open(struct tty_struct *tty, struct file *filp)
-{
- int err = line_open(vts, tty);
- if (err)
- printk(KERN_ERR "Failed to open console %d, err = %d\n",
- tty->index, err);
-
- return err;
-}
-
/* Set in an initcall, checked in an exitcall */
static int con_init_done = 0;
+static int con_install(struct tty_driver *driver, struct tty_struct *tty)
+{
+ return line_install(driver, tty, &vts[tty->index]);
+}
+
static const struct tty_operations console_ops = {
- .open = con_open,
+ .open = line_open,
+ .install = con_install,
.close = line_close,
.write = line_write,
.put_char = line_put_char,
@@ -114,6 +110,8 @@ static const struct tty_operations console_ops = {
.set_termios = line_set_termios,
.throttle = line_throttle,
.unthrottle = line_unthrottle,
+ .cleanup = line_cleanup,
+ .hangup = line_hangup,
};
static void uml_console_write(struct console *console, const char *string,
--
1.7.7.3
------------------------------------------------------------------------------
Live Security Virtual Conference
Exclusive live event will cover all the ways today's security and
threat landscape has changed and how IT managers can respond. Discussions
will include endpoint security, mobile security and the latest in malware
threats. http://www.accelacomm.com/jaw/sfrnl04242012/114/50122263/
_______________________________________________
User-mode-linux-devel mailing list
User-mode-linux-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/user-mode-linux-devel
