Hi Kenneth, Fantastic idea!
One thing that came to mind from my reading of the proposed setup was rack awareness of each node. Given that the proposed setup contains three DCs, I assume that each node will be made rack aware? If not, consider defining three racks for each DC and placing two nodes in each rack. This will ensure that all the nodes in a single rack contain at most one replica of the data. Regards, Anthony On 17 January 2018 at 11:24, Kenneth Brotman <kenbrot...@yahoo.com.invalid> wrote: > Sure. That takes the project from awesome to 10X awesome. I absolutely > would be willing to do that. Thanks Kurt! > > > > Regarding your comment on the keyspaces, I agree. There should be a few > simple examples one way or the other that can be duplicated and observed, > and then an example to duplicate and play with that has a nice real world > mix, with some keyspaces that replicate over only a subset of DC’s and some > that replicate to all DC’s. > > > > Kenneth Brotman > > > > *From:* kurt greaves [mailto:k...@instaclustr.com] > *Sent:* Tuesday, January 16, 2018 1:31 PM > *To:* User > *Subject:* Re: Slender Cassandra Cluster Project > > > > Sounds like a great idea. Probably would be valuable to add to the > official docs as an example set up if you're willing. > > > > Only thing I'd add is that you should have keyspaces that replicate over > only a subset of DC's, plus one/some replicated to all DC's > > > > On 17 Jan. 2018 03:26, "Kenneth Brotman" <kenbrot...@yahoo.com.invalid> > wrote: > > I’ve begun working on a reference project intended to provide guidance on > configuring and operating a modest Cassandra cluster of about 18 nodes > suitable for the economic study, demonstration, experimentation and testing > of a Cassandra cluster. > > > > The slender cluster would be designed to be as inexpensive as possible > while still using real world hardware in order to lower the cost to those > with limited initial resources. Sorry no Raspberry Pi’s for this project. > > > > There would be an on-premises version and a cloud version. Guidance would > be provided on configuring the cluster, on demonstrating key Cassandra > behaviors, on files sizes, capacity to use with the Slender Cassandra > Cluster, and so on. > > > > Why about eighteen nodes? I tried to figure out what the minimum number of > nodes needed for Cassandra to be Cassandra is? Here were my considerations: > > > > • A user wouldn’t run Cassandra in just one data center; so at > least two datacenters. > > • A user probably would want a third data center available for > analytics. > > • There needs to be enough nodes for enough parallelism to > observe Cassandra’s distributed nature. > > • The cluster should have enough nodes that one gets a sense > of the need for cluster wide management tools to do things like repairs, > snapshots and cluster monitoring. > > • The cluster should be able to demonstrate a RF=3 with local > quorum. If replicated in all three data centers, one write would impact > half the 18 nodes, 3 datacenters X 3 nodes per data center = 9 nodes of 18 > nodes. If replicated in two of the data centers, one write would still > impact one third of the 18 nodes, 2 DC’s X 3 nodes per DC = 6 of the 18 > nodes. > > > > So eighteen seems like the minimum number of nodes needed. That’s six > nodes in each of three data centers. > > > > Before I get too carried away with this project, I’m looking for some > feedback on whether this project would indeed be helpful to others? Also, > should the project be changed in any way? > > > > It’s always a pleasure to connect with the Cassandra users’ community. > Thanks for all the hard work, the expertise, the civil dialog. > > > > Kenneth Brotman >
