> Q2: after a, map(A), and map(B) would work fine. Assign watermarks > immediatedly after a keyBy() is not a good idea, because 1) the records are > shuffled and it's hard to reasoning about ordering, and 2) you lose the > KeyedStream property and would have to keyBy() again (unless you use > interpreteAsKeyedStream).
I know it is better to assignTimestampsAndWatermarks as early as possible. I intentionally put it after keyBy to check my understanding of this specific situation because I may have to use assignTimestampsAndWatermarks after keyBy in my application. I didn't make my question's intention clear though. I'm glad to learn another trick from you: reinterpretAsKeyedStream :). Let's assume it is keyBy. assignTimestampsAndWatermarks.reinterpretAsKeyedStream.timeWindow(C). I wanted to ask: Because it is using keyed windows, every key's window is fired independently, even if I assignTimestampsAndWatermarks after keyBy and C.2 doesn't have any data so generates no watermarks, it won't affect the firing of C.1's windows. Is this understand correct? > Although C.2 does not receive data, it receives watermarks because WMs are > broadcasted. They flow to any task that is reachable by any event. The case > that all keys fall into C.1 is not important because a record for C.2 might > arrive at any point in time. Also Flink does does not give any guarantees > about how keys (or rather key groups) are assigned to tasks. If you rescale > the application to a parallelism of 3, the active key group might be > scheduled to C.2 or C.3. > > Long story short, D makes progress in event time because watermarks are > broadcasted. I know watermarks are broadcasted. But I'm using assignTimestampsAndWatermarks after keyBy, so C.2 doesn't receive watermarks, it creates watermarks from it's received data. Since it doesn't receive any data, it doesn't create any watermarks. D couldn't make progress because one of its inputs, C2, doesn't make progress. Is this understand correct? On 2019/05/10 10:38:35, Fabian Hueske <fhue...@gmail.com> wrote: > Hi, > > Again answers below ;-) > > Am Do., 9. Mai 2019 um 17:12 Uhr schrieb an0 <an0...@gmail.com>: > > > You are right, thanks. But something is still not totally clear to me. > > I'll reuse your diagram with a little modification: > > > > DataStream<X> a = ... > > a.map(A).map(B).keyBy(....).timeWindow(C) > > > > and execute this with parallelism 2. However, keyBy only generates one > > single key value, and assume they all go to C.1. Does the data flow look > > like this? > > > > A.1 -- B.1 -----/-- C.1 > > / > > A.2 -- B.2 --/ C.2 > > > > Will the lack of data into C.2 prevent C.1's windows from firing? Will the > > location of assignTimestampsAndWatermarks(after a, after map(A), after > > map(B), after keyBy) matter for the firing of C.1's windows > > By my understanding, the answers are "no" and "no". Correct? > > > > Q1: no. Watermarks are propagated even in case of skewed key distribution. > C.2 will also advance it's event-time clock (based on the WMs) and forward > new WMs. > Q2: after a, map(A), and map(B) would work fine. Assign watermarks > immediatedly after a keyBy() is not a good idea, because 1) the records are > shuffled and it's hard to reasoning about ordering, and 2) you lose the > KeyedStream property and would have to keyBy() again (unless you use > interpreteAsKeyedStream). > > > > Now comes the *silly* question: does C.2 exist at all? Since there is only > > one key value, only one C instance is needed. I could see that C.2 as a > > physical instance may exist, but as a logical instance it shouldn't exist > > in the diagram because it is unused. I feel the answer to this silly > > question may be the most important in understanding my and(perhaps many > > others') misunderstanding of situations like this. > > > > If C.2 exists just because parallelism is set to 2, even though it is not > > logically needed, and it also serves as an input to the next operator if > > there is one, then the mystery is completely solved for me. > > > > C.2 exists. Flink does not create a flow topology based on data values. As > soon as there is a record with a key that would need to go to C.2, we would > need it. > > > > Use a concrete example: > > > > DataStream<X> a = ... > > > > a.map(A).map(B).keyBy(....).assignTimestampsAndWatermarks(C).timeWindowAll(D) > > > > A.1 -- B.1 -----/-- C.1 --\ > > / D > > A.2 -- B.2 --/ C.2 --/ > > > > D's watermark can not progress because C.2's watermark can not progress, > > because C.2 doesn't have any input data, even though C.2 is not logically > > needed but it does exist and it ruins everything :p. Is this understanding > > correct? > > > > Although C.2 does not receive data, it receives watermarks because WMs are > broadcasted. They flow to any task that is reachable by any event. The case > that all keys fall into C.1 is not important because a record for C.2 might > arrive at any point in time. Also Flink does does not give any guarantees > about how keys (or rather key groups) are assigned to tasks. If you rescale > the application to a parallelism of 3, the active key group might be > scheduled to C.2 or C.3. > > Long story short, D makes progress in event time because watermarks are > broadcasted. > > > > > > On 2019/05/09 10:01:44, Fabian Hueske <fhue...@gmail.com> wrote: > > > Hi, > > > > > > Please find my response below. > > > > > > Am Fr., 3. Mai 2019 um 16:16 Uhr schrieb an0 <an0...@gmail.com>: > > > > > > > Thanks, but it does't seem covering this rule: > > > > --- Quote > > > > Watermarks are generated at, or directly after, source functions. Each > > > > parallel subtask of a source function usually generates its watermarks > > > > independently. These watermarks define the event time at that > > particular > > > > parallel source. > > > > > > > > As the watermarks flow through the streaming program, they advance the > > > > event time at the operators where they arrive. Whenever an operator > > > > advances its event time, it generates a new watermark downstream for > > its > > > > successor operators. > > > > > > > > Some operators consume multiple input streams; a union, for example, or > > > > operators following a keyBy(…) or partition(…) function. Such an > > operator’s > > > > current event time is the minimum of its input streams’ event times. > > As its > > > > input streams update their event times, so does the operator. > > > > --- End Quote > > > > > > > > The most relevant part, I believe, is this: > > > > "Some operators consume multiple input streams…operators following a > > > > keyBy(…) function. Such an operator’s current event time is the > > minimum of > > > > its input streams’ event times." > > > > > > > > But the wording of "current event time is the minimum of its input > > > > streams’ event times" actually implies that the input streams(produced > > by > > > > keyBy) have different watermarks, the exactly opposite of what you just > > > > explained. > > > > > > > > > > > IMO, the description in the documentation is correct, but looks at the > > > issue from a different angle. > > > An operator task typically has many input from which it receives records. > > > Depending on the number of input operators (one ore more) and the > > > connection between the operator and its input operators (forward, > > > partition, broadcast), an operator task might have a connection to one, > > > some, or all tasks of its input operators. Each input task can send a > > > different watermark, but each task will also send the same watermark to > > all > > > its output tasks. > > > > > > So, this is a matter of distinguishing receiving (different) watermarks > > and > > > emitting (the same) watermarks. > > > > > > Best, Fabian > > > > > > > > > > On 2019/05/03 07:32:07, Fabian Hueske <fhue...@gmail.com> wrote: > > > > > Hi, > > > > > > > > > > this should be covered here: > > > > > > > > > > > https://ci.apache.org/projects/flink/flink-docs-release-1.8/dev/event_time.html#watermarks-in-parallel-streams > > > > > > > > > > Best, Fabian > > > > > > > > > > Am Do., 2. Mai 2019 um 17:48 Uhr schrieb an0 <an0...@gmail.com>: > > > > > > > > > > > This explanation is exactly what I'm looking for, thanks! Is such > > an > > > > > > important rule documented anywhere in the official document? > > > > > > > > > > > > On 2019/04/30 08:47:29, Fabian Hueske <fhue...@gmail.com> wrote: > > > > > > > An operator task broadcasts its current watermark to all > > downstream > > > > tasks > > > > > > > that might receive its records. > > > > > > > If you have an the following code: > > > > > > > > > > > > > > DataStream<X> a = ... > > > > > > > a.map(A).map(B).keyBy(....).window(C) > > > > > > > > > > > > > > and execute this with parallelism 2, your plan looks like this > > > > > > > > > > > > > > A.1 -- B.1 --\--/-- C.1 > > > > > > > X > > > > > > > A.2 -- B.2 --/--\-- C.2 > > > > > > > > > > > > > > A.1 will propagate its watermarks to B.1 because only B.1 will > > > > receive > > > > > > its > > > > > > > output events. > > > > > > > However, B.1 will propagate its watermarks to C.1 and C.2 > > because the > > > > > > > output of B.1 is partitioned and all C tasks might receive output > > > > events > > > > > > > from B.1. > > > > > > > > > > > > > > Best, Fabian > > > > > > > > > > > > > > Am Mo., 29. Apr. 2019 um 20:06 Uhr schrieb an0 <an0...@gmail.com > > >: > > > > > > > > > > > > > > > Thanks very much. It definitely explains the problem I'm > > seeing. > > > > > > However, > > > > > > > > something I need to confirm: > > > > > > > > You say "Watermarks are broadcasted/forwarded anyway." Do you > > > > mean, in > > > > > > > > assingTimestampsAndWatermarks.keyBy.window, it doesn't matter > > what > > > > data > > > > > > > > flows through a specific key's stream, all key streams have the > > > > same > > > > > > > > watermarks? So time-wise, `window` behaves as if `keyBy` is not > > > > there > > > > > > at > > > > > > > > all? > > > > > > > > > > > > > > > > On 2019/04/26 06:34:10, Dawid Wysakowicz < > > dwysakow...@apache.org> > > > > > > wrote: > > > > > > > > > Hi, > > > > > > > > > > > > > > > > > > Watermarks are meta events that travel independently of data > > > > events. > > > > > > > > > > > > > > > > > > 1) If you assingTimestampsAndWatermarks before keyBy, all > > > > parallel > > > > > > > > > instances of trips have some data(this is my assumption) so > > > > > > Watermarks > > > > > > > > > can be generated. Afterwards even if some of the keyed > > partitions > > > > > > have > > > > > > > > > no data, Watermarks are broadcasted/forwarded anyway. In > > other > > > > words > > > > > > if > > > > > > > > > at some point Watermarks were generated for all partitions > > of a > > > > > > single > > > > > > > > > stage, they will be forwarded beyond this point. > > > > > > > > > > > > > > > > > > 2) If you assingTimestampsAndWatermarks after keyBy, you try > > to > > > > > > assign > > > > > > > > > watermarks for an empty partition which produces no > > Watermarks > > > > at all > > > > > > > > > for this partition, therefore there is no progress beyond > > this > > > > point. > > > > > > > > > > > > > > > > > > I hope this clarifies it a bit. > > > > > > > > > > > > > > > > > > Best, > > > > > > > > > > > > > > > > > > Dawid > > > > > > > > > > > > > > > > > > On 25/04/2019 16:49, an0 wrote: > > > > > > > > > > If my understanding is correct, then why > > > > > > > > `assignTimestampsAndWatermarks` before `keyBy` works? The > > > > > > `timeWindowAll` > > > > > > > > stream's input streams are task 1 and task 2, with task 2 > > idling, > > > > no > > > > > > matter > > > > > > > > whether `assignTimestampsAndWatermarks` is before or after > > `keyBy`, > > > > > > because > > > > > > > > whether task 2 receives elements only depends on the key > > > > distribution, > > > > > > has > > > > > > > > nothing to do with timestamp assignment, right? > > > > > > > > > > > > > > > > > > > > > > > > > > > > /key 1 trips\ > > > > > > > > > > > > > > > > > > / \ > > > > > > > > > > (A) trips--> assignTimestampsAndWatermarks-->keyBy > > > > > > > > timeWindowAll > > > > > > > > > > > > > > > > > > \ idle / > > > > > > > > > > > > > > > > > > \key 2 trips/ > > > > > > > > > > > > > > > > > > > > /key 1 trips--> > > > > > > > > assignTimestampsAndWatermarks\ > > > > > > > > > > / > > > > > > > > \ > > > > > > > > > > (B) trips-->keyBy > > > > > > > > timeWindowAll > > > > > > > > > > \ idle > > > > > > > > / > > > > > > > > > > \key 2 trips--> > > > > > > > > assignTimestampsAndWatermarks/ > > > > > > > > > > > > > > > > > > > > How things are different between A and B from > > `timeWindowAll`'s > > > > > > > > perspective? > > > > > > > > > > > > > > > > > > > > BTW, thanks for the webinar link, I'll check it later. > > > > > > > > > > > > > > > > > > > > On 2019/04/25 08:30:20, Dawid Wysakowicz < > > > > dwysakow...@apache.org> > > > > > > > > wrote: > > > > > > > > > >> Hi, > > > > > > > > > >> > > > > > > > > > >> Yes I think your explanation is correct. I can also > > recommend > > > > > > Seth's > > > > > > > > > >> webinar where he talks about debugging Watermarks[1] > > > > > > > > > >> > > > > > > > > > >> Best, > > > > > > > > > >> > > > > > > > > > >> Dawid > > > > > > > > > >> > > > > > > > > > >> [1] > > > > > > > > > >> > > > > > > > > > > > > > > > > > > > > https://www.ververica.com/resources/webinar/webinar/debugging-flink-tutorial > > > > > > > > > >> > > > > > > > > > >> On 22/04/2019 22:55, an0 wrote: > > > > > > > > > >>> Thanks, I feel I'm getting closer to the truth. > > > > > > > > > >>> > > > > > > > > > >>> So parallelism is the cause? Say my parallelism is 2. > > Does > > > > that > > > > > > mean > > > > > > > > I get 2 tasks running after `keyBy` if even all elements have > > the > > > > same > > > > > > key > > > > > > > > so go to 1 down stream(say task 1)? And it is the other > > task(task > > > > 2) > > > > > > with > > > > > > > > no incoming data that caused the `timeWindowAll` stream unable > > to > > > > > > progress? > > > > > > > > Because both task 1 and task 2 are its input streams and one is > > > > idling > > > > > > so > > > > > > > > its event time cannot make progress? > > > > > > > > > >>> > > > > > > > > > >>> On 2019/04/22 01:57:39, Guowei Ma <guowei....@gmail.com> > > > > wrote: > > > > > > > > > >>>> HI, > > > > > > > > > >>>> > > > > > > > > > >>>> BoundedOutOfOrdernessTimestampExtractors can send a WM > > at > > > > least > > > > > > > > after it > > > > > > > > > >>>> receives an element. > > > > > > > > > >>>> > > > > > > > > > >>>> For after Keyby: > > > > > > > > > >>>> Flink uses the HashCode of key and the parallelism of > > down > > > > > > stream > > > > > > > > to decide > > > > > > > > > >>>> which subtask would receive the element. This means if > > your > > > > key > > > > > > is > > > > > > > > always > > > > > > > > > >>>> same, all the sources will only send the elements to the > > > > same > > > > > > down > > > > > > > > stream > > > > > > > > > >>>> task, for example only no. 3 > > > > > > > > BoundedOutOfOrdernessTimestampExtractor. > > > > > > > > > >>>> > > > > > > > > > >>>> For before Keyby: > > > > > > > > > >>>> In your case, the Source and > > > > > > > > BoundedOutOfOrdernessTimestampExtractors would > > > > > > > > > >>>> be chained together, which means every > > > > > > > > > >>>> BoundedOutOfOrdernessTimestampExtractors will receive > > > > elements. > > > > > > > > > >>>> > > > > > > > > > >>>> Best, > > > > > > > > > >>>> Guowei > > > > > > > > > >>>> > > > > > > > > > >>>> > > > > > > > > > >>>> an0 <an0...@gmail.com> 于2019年4月19日周五 下午10:41写道： > > > > > > > > > >>>> > > > > > > > > > >>>>> Hi, > > > > > > > > > >>>>> > > > > > > > > > >>>>> First of all, thank you for the `shuffle()` tip. It > > works. > > > > > > > > However, I > > > > > > > > > >>>>> still don't understand why it doesn't work without > > calling > > > > > > > > `shuffle()`. > > > > > > > > > >>>>> > > > > > > > > > >>>>> Why would not all > > BoundedOutOfOrdernessTimestampExtractors > > > > > > receive > > > > > > > > trips? > > > > > > > > > >>>>> All the trips has keys and timestamps. As I said in my > > > > reply to > > > > > > > > Paul, I see > > > > > > > > > >>>>> the same watermarks being extracted. > > > > > > > > > >>>>> > > > > > > > > > >>>>> How could calling `assignTimestampsAndWatermarks` > > before VS > > > > > > after > > > > > > > > `keyBy` > > > > > > > > > >>>>> matter? My understanding is any specific window for a > > > > specific > > > > > > key > > > > > > > > always > > > > > > > > > >>>>> receives the exactly same data, and the calling order > > of > > > > > > > > > >>>>> `assignTimestampsAndWatermarks` and `keyBy` shouldn't > > > > affect > > > > > > that. > > > > > > > > > >>>>> > > > > > > > > > >>>>> To make `keyBy` as irrelevant as possible, I tried > > letting > > > > it > > > > > > > > always > > > > > > > > > >>>>> return the same key so that there is only 1 keyed > > stream > > > > and > > > > > > it is > > > > > > > > exactly > > > > > > > > > >>>>> the same as the original unkeyed stream. It still > > doesn't > > > > > > trigger > > > > > > > > windows: > > > > > > > > > >>>>> ```java > > > > > > > > > >>>>> DataStream<Trip> trips = env.addSource(consumer); > > > > > > > > > >>>>> KeyedStream<Trip, Long> userTrips = trips.keyBy(trip -> > > > > 0L); > > > > > > > > > >>>>> DataStream<Trip> featurizedUserTrips = > > > > > > > > > >>>>> userTrips.map(trip -> > > > > > > > > trip).assignTimestampsAndWatermarks(new > > > > > > > > > >>>>> > > > > BoundedOutOfOrdernessTimestampExtractor<Trip>(Time.days(1)) { > > > > > > > > > >>>>> @Override > > > > > > > > > >>>>> public long extractTimestamp(Trip trip) { > > > > > > > > > >>>>> return trip.endTime.getTime(); > > > > > > > > > >>>>> } > > > > > > > > > >>>>> }); > > > > > > > > > >>>>> AllWindowedStream<Trip, TimeWindow> windowedUserTrips = > > > > > > > > > >>>>> featurizedUserTrips.timeWindowAll(Time.days(7), > > > > > > > > > >>>>> Time.days(1)); > > > > > > > > > >>>>> ``` > > > > > > > > > >>>>> > > > > > > > > > >>>>> It makes no sense to me. Please help me understand why > > it > > > > > > doesn't > > > > > > > > work. > > > > > > > > > >>>>> Thanks! > > > > > > > > > >>>>> > > > > > > > > > >>>>> On 2019/04/19 04:14:31, Guowei Ma < > > guowei....@gmail.com> > > > > > > wrote: > > > > > > > > > >>>>>> Hi, > > > > > > > > > >>>>>> After keyby maybe only some of > > > > > > > > BoundedOutOfOrdernessTimestampExtractors > > > > > > > > > >>>>>> could receive the elements(trip). If that is the case > > > > > > > > > >>>>>> BoundedOutOfOrdernessTimestampExtractor, which does > > not > > > > > > receive > > > > > > > > element > > > > > > > > > >>>>>> would not send the WM. Since that the timeWindowAll > > > > operator > > > > > > > > could not be > > > > > > > > > >>>>>> triggered. > > > > > > > > > >>>>>> You could add a shuffle() before the > > > > > > > > assignTimestampsAndWatermarks in > > > > > > > > > >>>>> your > > > > > > > > > >>>>>> second case and check if the window is triggered. If > > it > > > > > > could be > > > > > > > > > >>>>> triggered > > > > > > > > > >>>>>> you could check the distribution of elements > > generated by > > > > the > > > > > > > > source. > > > > > > > > > >>>>>> > > > > > > > > > >>>>>> Best, > > > > > > > > > >>>>>> Guowei > > > > > > > > > >>>>>> > > > > > > > > > >>>>>> > > > > > > > > > >>>>>> an0...@gmail.com <an0...@gmail.com> 于2019年4月19日周五 > > > > 上午4:10写道： > > > > > > > > > >>>>>> > > > > > > > > > >>>>>>> I don't think it is the watermark. I see the same > > > > watermarks > > > > > > > > from the > > > > > > > > > >>>>> two > > > > > > > > > >>>>>>> versions of code. > > > > > > > > > >>>>>>> > > > > > > > > > >>>>>>> The processing on the keyed stream doesn't change > > event > > > > time > > > > > > at > > > > > > > > all. I > > > > > > > > > >>>>> can > > > > > > > > > >>>>>>> simply change my code to use `map` on the keyed > > stream to > > > > > > return > > > > > > > > back > > > > > > > > > >>>>> the > > > > > > > > > >>>>>>> input data, so that the window operator receives the > > > > exactly > > > > > > same > > > > > > > > > >>>>> data. The > > > > > > > > > >>>>>>> only difference is when I do > > > > > > `assignTimestampsAndWatermarks`. The > > > > > > > > > >>>>> result is > > > > > > > > > >>>>>>> the same, `assignTimestampsAndWatermarks` before > > `keyBy` > > > > > > works: > > > > > > > > > >>>>>>> ```java > > > > > > > > > >>>>>>> DataStream<Trip> trips = > > > > > > > > > >>>>>>> > > > > > > env.addSource(consumer).assignTimestampsAndWatermarks(new > > > > > > > > > >>>>>>> > > > > BoundedOutOfOrdernessTimestampExtractor<Trip>(Time.days(1)) { > > > > > > > > > >>>>>>> @Override > > > > > > > > > >>>>>>> public long extractTimestamp(Trip trip) { > > > > > > > > > >>>>>>> return trip.endTime.getTime(); > > > > > > > > > >>>>>>> } > > > > > > > > > >>>>>>> }); > > > > > > > > > >>>>>>> KeyedStream<Trip, Long> userTrips = trips.keyBy(trip > > -> > > > > > > > > trip.userId); > > > > > > > > > >>>>>>> DataStream<Trip> featurizedUserTrips = > > > > userTrips.map(trip -> > > > > > > > > trip); > > > > > > > > > >>>>>>> AllWindowedStream<Trip, TimeWindow> > > windowedUserTrips = > > > > > > > > > >>>>>>> featurizedUserTrips.timeWindowAll(Time.days(7), > > > > > > > > > >>>>>>> Time.days(1)); > > > > > > > > > >>>>>>> ``` > > > > > > > > > >>>>>>> > > > > > > > > > >>>>>>> `assignTimestampsAndWatermarks` after `keyBy` doesn't > > > > work: > > > > > > > > > >>>>>>> ```java > > > > > > > > > >>>>>>> DataStream<Trip> trips = env.addSource(consumer); > > > > > > > > > >>>>>>> KeyedStream<Trip, Long> userTrips = trips.keyBy(trip > > -> > > > > > > > > trip.userId); > > > > > > > > > >>>>>>> DataStream<Trip> featurizedUserTrips = > > > > > > > > > >>>>>>> userTrips.map(trip -> > > > > > > > > trip).assignTimestampsAndWatermarks(new > > > > > > > > > >>>>>>> > > > > BoundedOutOfOrdernessTimestampExtractor<Trip>(Time.days(1)) { > > > > > > > > > >>>>>>> @Override > > > > > > > > > >>>>>>> public long extractTimestamp(Trip trip) { > > > > > > > > > >>>>>>> return trip.endTime.getTime(); > > > > > > > > > >>>>>>> } > > > > > > > > > >>>>>>> }); > > > > > > > > > >>>>>>> AllWindowedStream<Trip, TimeWindow> > > windowedUserTrips = > > > > > > > > > >>>>>>> featurizedUserTrips.timeWindowAll(Time.days(7), > > > > > > > > > >>>>>>> Time.days(1)); > > > > > > > > > >>>>>>> ``` > > > > > > > > > >>>>>>> > > > > > > > > > >>>>>>> It feels a bug to me, but I want to confirm it > > before I > > > > file > > > > > > the > > > > > > > > bug > > > > > > > > > >>>>>>> report. > > > > > > > > > >>>>>>> > > > > > > > > > >>>>>>> On 2019/04/18 03:38:34, Paul Lam < > > paullin3...@gmail.com> > > > > > > wrote: > > > > > > > > > >>>>>>>> Hi, > > > > > > > > > >>>>>>>> > > > > > > > > > >>>>>>>> Could you check the watermark of the window > > operator? > > > > One > > > > > > > > possible > > > > > > > > > >>>>>>> situation would be some of the keys are not getting > > > > enough > > > > > > > > inputs, so > > > > > > > > > >>>>> their > > > > > > > > > >>>>>>> watermarks remain below the window end time and hold > > the > > > > > > window > > > > > > > > > >>>>> operator > > > > > > > > > >>>>>>> watermark back. IMO, it’s a good practice to assign > > > > watermark > > > > > > > > earlier > > > > > > > > > >>>>> in > > > > > > > > > >>>>>>> the data pipeline. > > > > > > > > > >>>>>>>> Best, > > > > > > > > > >>>>>>>> Paul Lam > > > > > > > > > >>>>>>>> > > > > > > > > > >>>>>>>>> 在 2019年4月17日，23:04，an0...@gmail.com 写道： > > > > > > > > > >>>>>>>>> > > > > > > > > > >>>>>>>>> `assignTimestampsAndWatermarks` before `keyBy` > > works: > > > > > > > > > >>>>>>>>> ```java > > > > > > > > > >>>>>>>>> DataStream<Trip> trips = > > > > > > > > > >>>>>>>>> > > > > > > > > env.addSource(consumer).assignTimestampsAndWatermarks(new > > > > > > > > > >>>>>>> > > > > BoundedOutOfOrdernessTimestampExtractor<Trip>(Time.days(1)) { > > > > > > > > > >>>>>>>>> @Override > > > > > > > > > >>>>>>>>> public long extractTimestamp(Trip trip) > > { > > > > > > > > > >>>>>>>>> return trip.endTime.getTime(); > > > > > > > > > >>>>>>>>> } > > > > > > > > > >>>>>>>>> }); > > > > > > > > > >>>>>>>>> KeyedStream<Trip, Long> userTrips = > > trips.keyBy(trip -> > > > > > > > > > >>>>> trip.userId); > > > > > > > > > >>>>>>>>> DataStream<FeaturizedTrip> featurizedUserTrips = > > > > > > > > > >>>>> userTrips.process(new > > > > > > > > > >>>>>>> Featurization()); > > > > > > > > > >>>>>>>>> AllWindowedStream<FeaturizedTrip, TimeWindow> > > > > > > > > windowedUserTrips = > > > > > > > > > >>>>>>>>> > > featurizedUserTrips.timeWindowAll(Time.days(7), > > > > > > > > > >>>>>>>>> Time.days(1)); > > > > > > > > > >>>>>>>>> ``` > > > > > > > > > >>>>>>>>> > > > > > > > > > >>>>>>>>> But not after `keyBy` and `process`: > > > > > > > > > >>>>>>>>> ```java > > > > > > > > > >>>>>>>>> DataStream<Trip> trips = env.addSource(consumer); > > > > > > > > > >>>>>>>>> KeyedStream<Trip, Long> userTrips = > > trips.keyBy(trip -> > > > > > > > > > >>>>> trip.userId); > > > > > > > > > >>>>>>>>> DataStream<FeaturizedTrip> featurizedUserTrips = > > > > > > > > > >>>>>>>>> userTrips.process(new > > > > > > > > > >>>>>>> Featurization()).assignTimestampsAndWatermarks(new > > > > > > > > > >>>>>>> > > > > > > > > > > > > BoundedOutOfOrdernessTimestampExtractor<FeaturizedTrip>(Time.days(1)) { > > > > > > > > > >>>>>>>>> @Override > > > > > > > > > >>>>>>>>> public long > > extractTimestamp(FeaturizedTrip > > > > > > trip) { > > > > > > > > > >>>>>>>>> return trip.endTime.getTime(); > > > > > > > > > >>>>>>>>> } > > > > > > > > > >>>>>>>>> }); > > > > > > > > > >>>>>>>>> AllWindowedStream<FeaturizedTrip, TimeWindow> > > > > > > > > windowedUserTrips = > > > > > > > > > >>>>>>>>> > > featurizedUserTrips.timeWindowAll(Time.days(7), > > > > > > > > > >>>>>>>>> Time.days(1)); > > > > > > > > > >>>>>>>>> ``` > > > > > > > > > >>>>>>>>> Windows are never triggered. > > > > > > > > > >>>>>>>>> > > > > > > > > > >>>>>>>>> Is it a bug or expected behavior? If the latter, > > where > > > > is > > > > > > it > > > > > > > > > >>>>>>> documented? > > > > > > > > > >> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
